|
| 1 | Total Lump sum price for the complete scope of work as referred in the bid document and addendum if any, for \\"PMS upgrade of BPB process Complex.\\" including consumables etc. as required for completion of the project at site, and including, but not limited to site survey, design & engineering, material selection, procurement, factory assembly & testing, transportation, supply, removal of existing system components under up-gradation, erection / installation of new components, configuration, integration with balance system, interfacing with other systems, site testing, post commissioning support, warranty, all taxes and duties, Corporate tax, GST etc. as applicable to complete the job on turnkey basis as per the bid document. |
| 2 | Material (As calculated from Material Break up sheet) |
| 3 | Services (As calculated from Service Break up sheet) Break-Up of Lumpsum Price - MATERIAL Tender No.: Q15VS26002 Name of the bidder: Notes: |
| 4 | Being a LSTK tender, bidder will be responsible to complete the job as per the scope of work within the quoted price. |
| 5 | Only blue colored cells to be Filled. |
| 6 | Bidders to quote itemwise prices excluding GST amount. All other taxes, duties, freight etc to be incorporated while quoting item wise price. |
| 7 | Bidders to quote GST percentage applicable for total material cost in the required cell GST % on TOTAL MATERIAL COST % UOM Sub-Total A (Material): Total Material Cost excluding GST (Sum of TP). INR 0.0 GST AMOUNT on TOTAL MATERIAL Cost INR 15 Total (LUMP SUM) Cost of MATERIAL INCLUDING GST TCM INR 15 Sl No. Description of Item Quantity Unit Unit Price(Excluding GST) Total Price (Excluding GST) (Q) (U) (UP) (TP=Q*UP) (INR) A Material |
| 8 | Precommissioning stage material Material supply as per Scope of work & Other terms and conditions forBPB platform (Ref Annexure 1 to 6 of SOW) |
| 9 | Precommissioning stage material Material supply as per Scope of work & Other terms and conditions forBPB platform (Ref Annexure- 11 of SOW) |
| 10 | PMS spares (Ref Annexure 10 of SOW) Digital input card |
| 11 | PMS spares (Ref Annexure 10 of SOW) Digital output card |
| 12 | PMS spares (Ref Annexure 10 of SOW) Analogue input card |
| 13 | PMS spares (Ref Annexure 10 of SOW) Power Supply Unit |
| 14 | PMS spares (Ref Annexure 10 of SOW) Ribbon cables |
| 15 | PMS spares (Ref Annexure 10 of SOW) PS IOPI (Main) Processor Card |
| 16 | PMS upgrade kit (Ref Annexure 10 of SOW) PS-BT2 PMS Controller |
| 17 | PMS upgrade kit (Ref Annexure 10 of SOW) Panel mounted HMI PC/monitor |
| 18 | PMS upgrade kit (Ref Annexure 10 of SOW) Managed Ethernet Switches |
| 19 | PMS upgrade kit (Ref Annexure 10 of SOW) Ethernet to RS485/422 Protocol Gateway |
| 20 | PMS upgrade kit (Ref Annexure 10 of SOW) Plugin Control Relays (5 off), total 95 |
| 21 | PMS upgrade kit (Ref Annexure 10 of SOW) PS IOP2 Processor Card |
| 22 | PMS upgrade kit (Ref Annexure 10 of SOW) Single Pole Relay Base Break-Up of Lumpsum Price - Services Tender No.: Q15VS26002 Name of the bidder: Notes: |
| 23 | Being a LSTK tender, bidder will be responsible to complete the job as per the scope of work within the quoted price. |
| 24 | Only blue colored cells to be Filled. |
| 25 | Bidders to quote itemwise prices excluding GST amount. All other taxes, duties, freight etc to be incorporated while quoting item wise price. |
| 26 | Bidders to quote GST percentage applicable for total service cost in the required cell |
| 27 | Payment for Mobilization/Demobilization (MOB/DEMOB) and man-day charges for Brush FSR and Indian FSR personnel shall be made based on actuals, as recorded in the time sheets duly signed by the Contractor’s Representative and BPB MM and upon submission of invoices . Such payments shall be limited to the man-days and MOB/DEMOB quantities stipulated in this Contract GST % on TOTAL SERVICE COST % UOM Sub-Total B (Service): Total Service Cost excluding GST (Sum of bc). INR 0.0 GST AMOUNT on TOTAL Service Cost INR 15 Total (LUMP SUM) Cost of Service INCLUDING GST TCM INR 15 Sl No. Description of Item Quantity Unit Unit Price(Excluding GST) Total Price (Excluding GST) (Q) (U) (UP) (TP=Q*UP) (INR) B Service |
| 28 | Mobilisation / Demobilisation of Field Engineer- Brush, including but not limited to FSR travel, FSR travel stand-by, FSR local stay, FSR visa and logistic. (02 FSR)International air travel/ visa/ stay/ logistics |
| 29 | Mobilisation / Demobilisation of Field Engineer - Indian (2 FSE)Domestic air travel/ stay/ logistics |
| 30 | Brush FSR PMS unit (Installation and commissioning)1. Installation of PRISM IC® PMS2. Pre-commissioning PRISM IC®PMS3. Commissioning of PR ISMIC®PMS4. Site Acceptance Testing5. Operator product familiarisationtraining |
| 31 | Indian FSR (precommissioing+installation+commissioning) |
| 32 | Tool Hire for Secondary Injection Kit and special tools |
| 33 | Documentation - Method Statement for PMS BIDDERS CONFIRMATION SHEET - TAXES AND DUTIES Tender No.: Q15VS26002 Name of the bidder: Notes: |
| 34 | Bidders are required to ascertain themselves, the prevailing rates of GST and all other taxes and duties as applicable on the scheduled date of submission of Price Bids and ONGC would not undertake any responsibility whatsoever in this regard. Accordingly, bidders should quote the prices, clearly indicating the applicable rate of GST / description of service as per GST rules (under which the respective service is covered), Service Accounting Code, alongwith all other taxes and duties applicable. |
| 35 | Bidder may suitably add other heads in terms of Change in Law clause of General Conditions of Contract. |
| 36 | Prices should be inclusive of corporate taxes as applicable and the same is not covered under the Change-in-Law provisions. RATES OF TAXES & DUTIES CONSIDERED AND INCLUDED IN THE LUMPSUM PRICE FOR CHANGE IN LAW Laws, Acts, Rules, regulations etc. and the tariffs thereof considered by the bidder while estimating the incidence of taxes, duties, fees, levies etc. considered and included in the bidder’s Lumpsum price (as quoted in BoQ1), as per relevant provisions of General Conditions of Contract to be used for the purpose of adjustment to the contract price in the event of Change in Law: Sr No Description of Item Tender Document / BEC Clause Reference Laws/Act/Rules/ Regulations etc. Reference Tariff Indicating Rate of Tax/Duty/ Fee/Levy etc Amount included in Lumpsum Price |
| 37 | Any other tax / duty |
| 38 | Any other tax / duty |
| 39 | Any other tax / duty |
| 40 | Any other tax / duty |
| 41 | Any other tax / duty |
| 42 | Any other tax / duty |
| 43 | Any other tax / duty |
| 44 | Any other tax / duty |
| 45 | Any other tax / duty Note: 1.0 Bidder to enter value in blue colored cell only 2.0 Bidders are required to ascertain themselves, the prevailing rates of GST and all other taxes and duties as applicable on the scheduled date of submission of Price Bids and ONGC would not undertake any responsibility whatsoever in this regard. Accordingly, bidders should quote the prices, clearly indicating the applicable rate of GST / description of service as per GST rules (under which the respective service is covered), Service Accounting Code, alongwith all other taxes and duties applicable. 3.0 Please note that wherever GST credit shall be available, supplier / contractor shall be required to offer rates taking into account eligibility of credit under GST to the supplier / contractor. 4.0 In case of mismatch between the prices quoted in the break up sheets (for material - TCM & services - TCS) and the respective prices provided in BoQ1 sheet, the prices quoted in BoQ1 sheet will be considered for evaluation as mentioned in note 5 above. However, the Contract Value will be evaluated as follows: 5.0 The taxes/duties included in the quoted price should be clearly indicate in Sheet \\"Taxes_Duties\\" for operating Change in Law clause. 6.0 Being LSTK tender, bidder will be responsible to complete the job as per scope of work within the quoted price. 7.0 Bidder to note that lump sum price quoted above shall be inclusive of all taxes & duties and all associated costs whatsoever for the entire facilities and scope of work as indicated in the bid package including addendums, if any. 8.0 Please quote GST as applicable. The bids will be evaluated considering IGST at the rate applicable on composite services as on TBO date (as per applicable rate) on total lumpsum price. Please Enable Macros to View BoQ information |
