|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : -1:5:10 (1 cement : 5 fine sand : 10 gradedstone aggregate 40 mm nominal size) leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : -- 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :- 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-chargesize |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for :- Foundations, footings, bases of columns, etc. for mass concrete leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :- Columns, Pillars, Piers, Abutments, Posts and Struts leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : - Cement mortar 1:6 (1 cement : 6 coarse sand leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 11 | 6 mm cement plaster of mix :-1:3 (1 cement : 3 fine sand) leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 12 | 15 mm cement plaster on rough side of single or half brick wall of mix:- 1:6 (1 cement: 6 coarse sand) leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 13 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.(a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.(a) Two coats leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required:-n gratings, frames, guard bar, ladder, railings, brackets, gates and similar works leads and lifts upto all meter, as per direction and best satisfaction of Engineer-in-charge Please Enable Macros to View BoQ information |
