|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (up to all width), including dressing of sides and ramming of bottoms, up to all lift, including getting out the excavated soil and disposal of surplus excavated soil all lead and lifts as directed by the Engineer-in- charge. (a) All kinds of soil. |
| 3 | Centering and shuttering including strutting propping etc. and removal of form work for including carriage of material in all leads and lifts. (a) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts. |
| 5 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads and lifts. |
| 6 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20 (H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts. |
| 8 | Providing and fixing ISI marked finish and uniform shape and size precast ( Pre-Stressed) compound wall column of size 150mm x150mmx with vertical height 3.00 mtres. including shuttering reinforcement with 7 bars of 3mm HT steel with M-25 grade mix design concrete with a provision of 16mm dis M.S. bolts ( 20cm length) grouted at the time of casting with 5cm outside for fixing of angle at the top of each column for barded wire and concertina coil fencing as per drawing. Precast compound wall columns shell be provided with groove for wall panel slab fixing and grouted below ground level by Augur Pilling/ excavation and grouted with PCC as per BIS specification IS:1343 (2012) (PCC and Augur Pilling or excavation will be paid separately) including carriage of material in all leads and lifts. |
| 9 | Providing and fixing ISI marked smooth finish and uniform shape and size precast (Pre-Stressed) compound wall panel up to 2100 mm length as per site requirment, plank 300 mm wide and 50 mm thick including shuttering, reinforcement with 3 bars of 3 mm dia HT steel with M-25 grade mix design conrete fixed in groove of vertical columns/ plots as per drawing and weep holes at bottom where as necessary including making logo on the outer side of middle panels complete as BIS specification IS:1343 (2012) including carriage of material in all leads and lifts. including carriage of material in all leads and lifts. |
| 10 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts. |
| 11 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) including carriage of material in all leads and lifts. |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 13 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts. |
| 14 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including carriage of material in all leads and lifts. Please Enable Macros to View BoQ information |
