|
| 1 | Clearing and Grubbing Road Land . Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per SOR SI No. 259 But Excluding GST |
| 2 | Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. (3.01 301)But Excluding GST |
| 3 | Construction of Embankment with material obtained from borrowpits : Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. ( 3.2&305)But Excluding GST |
| 4 | Construction of Embankment with Material obtained from Borrowpits (Lead 2Km.)Construction of embankment with approved material obtained from borrow pits with all lifts and leads with 2 Km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.But Excluding GST |
| 5 | Granular Sub-Base with Graded Material -Plant Mix Method (Table:- 400-1) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 But Excluding GST |
| 6 | Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(4.14&406)But Excluding GST |
| 7 | Prime Coat over WMM/WBM-Providing and applying primer coat with SS2 grade Bitumen Emulsion SS-2 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.(5.1&502A)But Excluding GST |
| 8 | Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) (5.2&503) ( For Existing Surface)But Excluding GST |
| 9 | Open - Graded Premix SurfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.But Excluding GST |
| 10 | Dense Graded Bituminous Macadam Grading -IIProviding and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.But Excluding GST |
| 11 | Bituminous Concrete Grading-IIProviding and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Morth 507-B But Excluding GST |
| 12 | Cement Concrete PavementConstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement (OPC) 400 kg per cum as per mix design, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation memberane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges. MoRTH Standard Data book S.No. 6.2 (602) But Excluding GST |
| 13 | S/F of Kilometer Stone/Sign Board lettring Painting etc. But Excluding GST |
| 14 | S/F of Hecto Meter Stone/Sign Board lettring Painting etc. But Excluding GST |
| 15 | S/F of Big Kilometer Stone/Sign Board lettring Painting etc.But Excluding GST |
| 16 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavated portion.Depth up to 3.0m. AS per Mort&H Clause 304B But Excluding GST |
| 17 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MORT&H Clause 9.03 But Excluding GST |
| 18 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1202&1203 For Drian, 350 & 600 mm Dia HP But Excluding GST |
| 19 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 But Excluding GST |
| 20 | Supply and laying 350mm HP NP-3 But Excluding GST |
| 21 | Supply and laying 600mm HP NP-3 But Excluding GST |
| 22 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. But Excluding GST |
| 23 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. But Excluding GST i) 60cm equiliteral tringle with diffinitation plate size (20cmX60cm) But Excluding GST |
| 24 | ii) 60cm Circular with diffinitation plate (20cmx60cm) But Excluding GST |
| 25 | iii) 80mmx60mm rectangular with diffinitation (20cmx60cm) Informetory Board But Excluding GST |
| 26 | iv) 60mmx45mm rectangular with diffinitation (20cmx60cm) But Excluding GST |
| 27 | v) 90 cm high octagon But Excluding GST |
| 28 | vi) 155x60cm double chevron But Excluding GST |
| 29 | vii) 30x90 cm Hazard But Excluding GST |
| 30 | Supply and Fixing of Linear Delineator System (LDS) Panels made of Micro Prismatic Retro Reflective Sheeting duly laminated of thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of norminal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly on existing MS railing MS Sections welding as and when required. SOR CH-27 SI-2 But Excluding GST |
| 31 | Supply & Fixing of pavement Makers (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound. The housing shall contain prismatic two glass coverd prismatic reflective face to reflect light I/C all taxes. SOR CH-27 SI-5 RPM (without shank) But Excluding GST |
| 32 | Repeated Bar 5mm high for one setProviding and laying of hot applied Thermoplastic compound 5mm thick including reflectorising slass beads @ 250gms per sqm area, thickness of 5mm is exclusive of surface applied glass beads as per IRC-35. The finished surface to be level, uniform and free from streak and holes. But Excluding GST |
| 33 | Making speed table bitumenous concrete with 5.4% VG-30 material (Tropizoidal Speed Table) on SHR/MDR/ODR Road with B.C. in tropizoidal shape 100mm high complete in all respect As per morth & specification and as per direction of E/I. But Excluding GST |
| 34 | Type A, \\"W\\" Metal Beam Crash BarrierProviding and erecting a \\"W\\" metal beam crash Barrier comprising of 3mm thick Corrugated Sheet metal beam rail, 70 cm above road/ ground lavle fixing ISMC Series channel Vertical post, 150x75x5mm spaced 2m center to center, 1.80 m high, 1.1 below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS:1364, Metal beam rail to be fixed in the vertical post with a spacer of channel section 150x75x5mm, 330mm long complet as per clause MoRTH - 810 But Excluding GST |
| 35 | Maintenance Charges for Bituminous Road Part Maintenance Charge including repair of painted surface, earthwork on patri, etc. complete as per direction of E.I. for the period of five years from the actual date of completion of work .For First Year @ Zero% (Excluding GST) |
| 36 | 2nd Year @ 0.25% (Excluding GST) |
| 37 | 3rd Year @ 0.50% (Excluding GST) |
| 38 | 4th Year @ 0.75% (Excluding GST) |
| 39 | 5th Year @ 1.00 % (Excluding GST) Please Enable Macros to View BoQ information |
