|
| 1 | Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work.. |
| 2 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) including curing complete including all carriages. |
| 6 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. |
| 10 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 11 | Providing and laying Ist class Glazed Ceramic wall tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:3 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown, including all carriages. |
| 12 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld all carriages. |
| 14 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 25mm OD(SDR-7.4) incld all carriages. |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests incld all carriages complete. |
| 16 | Providing and fixing of following PVC Pipes incld fittings like collars, door Junction,socket, bends etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete incld carriage from source to the site of work.100 mm dia |
| 17 | Providing and fixing of following PVC Pipes incld fittings like collars, door Junction,socket, bends etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete incld carriage from source to the site of work.75 mm dia |
| 18 | Providing and fixing of 15 mm nominal bore CP Brass Bib cock of approved Quality conforming to IS :8931 including all other features and fixtures with carriages from source to site of work. |
| 19 | Providing and fixing of 15 mm nominal bore CP Brass Angle valve of approved Quality conforming to IS :8931 including all other features and fixtures with carriages from source to site of work. |
| 20 | Providing and fixing of CP Connection of Approved Quality and make incld all fittings and fixtures complete. |
| 21 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore incld all carriages complete. |
| 22 | Providing and fixing 100 mm sand cast iron grating for gully trap incld all carriages complete. |
| 23 | Providing and fixing of Precast cement concrete rings and slab of 9 inch thickness with 10 mm dia bars @ 6 inch C/C complete Job incld necessary earth work with carriage. |
| 24 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore incld all carriages complete. |
| 25 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld all carriages. |
| 26 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) incld carriage. |
| 27 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications. Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture incld all carriage. |
| 28 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms incld all fittings and carriage.. |
| 29 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms incld all carriage. |
| 30 | Carriage of Material by MT:Sand -Avg 10 Km. |
| 31 | Carriage of Material by MT:Aggregrate -Avg 10 Km. |
| 32 | Carriage of Material by MT:Bricks -Avg 60 km. Please Enable Macros to View BoQ information |
