|
| 1 | S/F of LED Street Light Fitting with mandatory driver set having dia-cast aliminum body and lenses suitable for 70 watt confirming to IP 66, LM 79 to 80 protection with spd having company logo engraved including 5 years waranty/guranty with replacement connection wire and cables for street wire on GI pipe, bracket if Required at location would be provided as direction by the engineer incharged. complete in all respects. CAT- \\"AAA\\" |
| 2 | S/F of LED Street Light Fitting with mandatory driver set having dia-cast aliminum body and lenses suitable for 90 watt confirming to IP 66, LM 79 to 80 protection with spd having company logo engraved including 5 years waranty/guranty with replacement connection wire and cables for street wire on GI pipe, bracket if Required at location would be provided as direction by the engineer incharged. complete in all respects. CAT- \\"AAA\\" |
| 3 | S/F of LED Street Light Fitting with mandatory driver set having dia-cast aluminum body and lenses suitable for 120 watt confirming to IP 66, LM 79 to 80 protection with spd having company logo engraved including 5 years warranty/guaranty with replacement connection wire and cables for street wire on GI pipe, bracket if Required at location would be provided as direction by the engineer incharged. complete in all respects . CAT- \\"AAA\\" |
| 4 | S/F of 10Sqx2core unarmored cable complete in all Respects. |
| 5 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 6 | Head Frame GI (circular/square) suitable for 04 Luminaries. |
| 7 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- \\"AAA\\" |
| 8 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all-respects as per drawing (This will apply for earthing of poles also). |
| 9 | S/F of 240 volte 63AMP TPN rewritable type switch fuse unit on angle iron bracket on pole/wall. having one year defect liability period with replacement complete in all respects. |
| 10 | Supply and laying of 10 sqmm x 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 11 | S/F of 2.5 sqmm x 3 core copper flexible wire. complete in all respects. |
| 12 | Supply and laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend, coulers etc. conforming to ID Code 4984-2016 Part II complete with fitting and cutting, jointing etc. In the existing trench/ existing hole made by trench less cutting complete as required |
| 13 | S/F of 240 volte 16 AMP DP rewritable type switch fuse unit on angle iron bracket on pole/wall. having one year defect liability period with replacement complete in all respects. |
| 14 | S/F of 240 volte 32 AMP DP rewritable type switch fuse unit on angle iron bracket on pole/wall. having one year defect liability period with replacement complete in all respects. |
| 15 | S/F of 7 mtr. G.I. octagonal pole (topdia 70 mm bottom dia 130 mm and base plate 12mm). |
| 16 | S/F of 8 mtr. G.I. octagonal pole (topdia 70 mm bottom dia 135 mm and base plate 12mm). |
| 17 | S/F of 3 ph ccms group control with only gsm/gprs of 22 kw 25 amp having one year defect liability period with 3 years guarantee / warranty/ replacement complete in all respects Please Enable Macros to View BoQ information |
