|
| 1 | Site Clerance including labour and matrials andincluding grass cutting /Dressing and carrage ofmatrials by Head load |
| 2 | Dismenteling CC or granolithic floor with allcomp S.I.No-697 |
| 3 | Dismenteling of Brick Work including Stacking ofmaterials as directed by the Engineer-in-Chargewith the distance of 60.00m. Work SI No. 692 |
| 4 | E/W in Excavation in ordenery soil in foudationincluding labour and matrials and T/P with allcom. Work SI No. 251 |
| 5 | E/W filling in embankment with cartage soil up to8.00 km distances etc com. |
| 6 | C.C. Work in 1:6:12 in cement, fine sand and 40mm Gauge Brick Ballast including labour andmatrials, T/P with all com. Work SI No. 273 |
| 7 | RCC work in Raft Foundation & Footing withcement approved coarse sand & 20mm gaugedala stone grit in the proportion of 1:1.5:3 S.I.No. 287 |
| 8 | RCC work in Column with cement approved coarsesand & 20mm gauge dala stone grit in the proportionof 1:1.5:3 S.I. No. 289 |
| 9 | RCC work in Plinth Beam with cement approvedcoarse sand & 20mm gauge dala stone grit in theproportion of 1:1.5:3 S.I. No. 286 |
| 10 | RCC work for slab with cement approved coarsesand & 20mm gauge dala stone grit in the proportionof 1:1.5:3 S.I. No. 288 |
| 11 | MS work in R.C.C. work including labour andmatrials, T/P with all com. Work SI No.504 |
| 12 | roviding and laying Polished Granite stone flooringrequired designnd patterns, in linear as well as curvilinear portionsf the building allomplete as per the architectural drawings with 18nm thick stone slabver 20 mm (average) thick base of cement mortar:4 (1 cement : 4oarse sand) laid and jointed with cement slurry andointing with whiteement slurry admixed with pigment of matchinghade includingrubbing, curing and polishing etc. all complete asspecified and asdirected by the Engineer-in-Charge.11.56.1 Polished Granite stone slab colour PolishedGranite stone slab colour of Black, Cherry/RubyRed or equivalen. DSR2024 11.56.1 |
| 13 | Providing and laying rectified Glazed Ceramic floortiles of size 300x300mm or more (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622,of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on20 mm thick Cement |
| 14 | M-150 B/W in 1:4 in cement and coar sand mortarincluding labour and matrials, T/P with all com. WorkSI No.305 |
| 15 | M-150 B/W in 1:4 in Super Structure Withcement and coar sand mortar including labourand matrials, T/P with all com. Work SINo.305+309+310(A) |
| 16 | S/F of murga jali with all comp work. |
| 17 | P.C.C. Work in 1:2:4 in cement, Coarse sand and20 mm GaugeStone grit including labour andmatrials, T/P with all com. Work SI No. 279(B) |
| 18 | 12mm thick Plaster work in 1:3 in cement andfine sand mortar including labour and matrials,T/P with all com. Work SI No.583 |
| 19 | MS work in Grill, Gate including labour andmatrials, T/P with all com. Work SI No.503 |
| 20 | Scraping of old painting and colour white wash withdisposal of refusedas directing by engineer withdistance 6 mtr. |
| 21 | Providing and applying white cement basedputty of average thickness 1 mm, of approvedbrand and manufacturer, over the plastered wallsurface to prepare the surface even and smoothcomplete. DSR 13.8 |
| 22 | Finishing walls with water proofing cement paintof required shade :13.44.1 New work (Two or more coats applied @3.84 kg/10 sqm) 13.44 |
| 23 | P /L of 80 mm thick rubber mouldednterlocking cement concrete Paver blocks,WorkSI No.786(I) |
| 24 | Prelaminated particle board with one sidedecorative and other side balancing Lamination,flat pressed 3 layer & graded medium density)Grade I, Type II conforming to IS : 12823(exterior grade) 25 mm thick. DSR 9.6.3 |
| 25 | E/W in Excavation in ordenery soil in foudationincluding labour and matrials and T/P with all com.Work SI No. 251 |
| 26 | C.C. Work in 1:6:12 in cement, fine sand and 40 mmGauge Brick Ballast including labour and matrials ,T/P with all com. Work SI No. 273 |
| 27 | M-150 B/W in Sub Structure in 1:4 in cement andcoarse sand mortar including labour and matrialsT/P with all com. Work SI No.305DEDUCTED TO OLD BRICKS & BATS RS. 32410.00 |
| 28 | P.C.C. Work in 1:2:4 in cement, Coarse sand and 20mm GaugeStone grit including labour and matrials ,T/P with all com. Work SI No. 279(i) |
| 29 | RCC work in Beam with cement approved coarsesand & 20mm gauge dala stone grit in the proportionof 1:1.5:3 S.I. No. 285 |
| 30 | 25 mm thick D.P.C. in 1:2:4 ratio cement & coarsesand mortar after proper deduction (SI NO 361a) |
| 31 | E/W filling in embankment with cartage soil up to8.00 km distances etc com. |
| 32 | M-150 B/W in super structure in 1:4 in cement andcoarse sand mortar including labour and matrials ,T/P with all com. Work SI No.305+309+310 |
| 33 | RCC work for slab with cement approved coarsesand & 20mm gauge dala stone grit in the proportionof 1:1.5:3 S.I. No. 284(B) |
| 34 | MS work in R.C.C. work including labour andmatrials, T/P with all com. Work SI No.504 |
| 35 | 12mm thick Plaster work in 1:3 in cement and finesand mortar including labour and matrials, T/P withall com. Work SI No.583 |
| 36 | Providing and laying Ceramic glazed floor tiles of size300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622,of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thickbed of cement mortar 1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3 kg/ sq.mincluding pointing the joints with white cement andmatching pigments etc., complete. D S.R 2021 11.38 |
| 37 | Finishing walls with Acrylic Smooth exterior paint ofrequired shade for New work (Two or more coatapplied @ 1.67 Itr/10 sqm over and including primingcoat of exterior primer applied @ 2.20 kg/ 10 sqm)13.46.1 |
| 38 | P/F with 100mm sand cost iron P or S trap ,10 litre lowlevel white P.V.C flushing cistern with manuallycontrolled device (handle level )confirming to IS7231,with all comp work etc with all comp .S.No-17.3water closet squatting pan (indian type W.C. pan) |
| 39 | White Vitreous China Wash basin size 630x450 mmwith a single 15 mm C.P. brass pillar tap (DSR17.7.2)2018 |
| 40 | Providing & Aluminium Door, window, ventilator etccomp. as per the architectural drawings and thedirection of Engineer-in- charge .(cost of Aluminiumsnap beading shall be paid in basic Items.)Work SINo730 |
| 41 | Provinding & Placing on terrace Polythynlene waterstorage tank with cover & suitable Lockingarrangement etc all comp. |
| 42 | Cost of Electrification work |
| 43 | Add 18% GST Please Enable Macros to View BoQ information |
