|
| 1 | AS082051:MRL03-Gohain Ali To PHG Path link Road |
| 2 | AS082054:MRL11-Aka Tenpur To Selengi |
| 3 | AS082055:MRL08-Singabhata Road |
| 4 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material tobe used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness asper Technical Specification Clause 201.(i) By Manual Means(a) In area of non thorny jungle[SOR 2025-26][Item No. 2.1(i)] |
| 5 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrowpits with a lift upto 1.5m,transportingtosite,spreading,grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5Private Land[SOR 2025-26][Item No. 3.4(i)] |
| 6 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land[SOR 2025-26][Item No. 3.14(i)] |
| 7 | Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For Grading II Material[SOR 2025-26][Item No. 4.1 A(ii)] |
| 8 | WBM Grading 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(ii)] |
| 9 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(iii)] |
| 10 | Prime Coat :Low porosityProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502[SOR 2025-26][Item No. 5.1 (i)] |
| 11 | Tack CoatProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.[SOR 2025-26][Item No. 5.1 (ii)] |
| 12 | Mix Seal SurfacingProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509II By Mechanical MeansType B ii) Bitumen (S-65)[SOR 2025-26][Item No. 5.11 / I / A (i)] |
| 13 | Reinforced cement concrete M15 grade Kilometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and Technical specification Clause 1703 Ordinary K.M. stone (precast)[SOR 2025-26][Item No. 10.10 (ii)] |
| 14 | Reinforced cement concrete M15 grade Hectometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing &Technical specification Clause 1703 (iii) 200 mt stone (precast) [SOR 2026-26][Item No. 10.10 (iii)] |
| 15 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801.600 mm Equilateral [SOR 2026-26][Item No.10.2 / A-ii ] |
| 16 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801Stop Sign [600mm -Cricular] [SOR-2025-26][Item no. 10.2 / A1-iii] |
| 17 | TITLE INFORMATION BOARDProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1[SOR-2025-26][Item no. 10.16] |
| 18 | Providing and Fixing PMGSY Logo Board at finishing point of RoadProviding and fixing of typical PMGSY Logo board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx260cm above G.L.),(Size of board 1x 85cmx85cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. As Per Analysis |
| 19 | Providing and Fixing Citizen information Board of PMGSY Project(RCC)\\"A\\"Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint.As per Analysis |
| 20 | Providing and fixing of typical PMGSY Maintenance information sign board as per MORD specifications and drawing including painting and lettering and fixing in ground 600mm x 600mm x 750mm CC including painting two course and lettering.As Per Analysis |
| 21 | Rumble StripsProvision of 15 n0s.rumble strips covered with premix bituminous carpet,15.2 mm high at centre,250mm wide placed at 1m centre to centre at approved location to control speed, marked with white strips of road marking paint.The rate per sqm of premix carpet and road marking may be adopted from Chapters 5&10 respectively for the quantities calculated from approved drawings.[SOR-2025-26][Item no. 10.18] |
| 22 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New WorkPainting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702[SOR-2025-26][Item no. 10.8] |
| 23 | Surface Drains in SoilConstruction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.Manual Means[SOR-2025-26][Item no. 3.19 (i) (A)] |
| 24 | Cross Drainage WorksExcavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.[SOR 2025-26][Item No. 9.1 & 11.1 / I (i)] |
| 25 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203With natural Gravel, P.C.C Grade M 10, Nominal mix 1:3:6[SOR 2025-26][Item No. 9.7 / 11.4 / II / A / (i)] |
| 26 | Type B (First Class) Bedding Laying (FirstClass) bedding on well compacted sand, moorum as per Clause 1105 (ii)[SOR 2025-26][Item No. 9.2 (B) (i)] |
| 27 | Providing and laying reinforced cement concrete pipe NP3 for culverts as per design on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.(ii) 1000 mm dia[SOR 2025-26][Item No. 9.3 (ii)] |
| 28 | Providing concrete for plain / reinforced concrete in foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203With natural Gravel PCC Grade M 20Nominial mix (1:2:4) [SOR 2025-26][Item No. 11.4 / II / C / i] |
| 29 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204With Natural Gravel RCC Grade M 20, For height upto 5 m[SOR 2025-26][Item No. 12.5 / II / C (i)] |
| 30 | Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3[SOR 2025-26][Item No. 14.8] |
| 31 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand filling[SOR 2025-26][Item No. 11.2 (I)] |
| 32 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material tobe used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness asper Technical Specification Clause 201.(i) By Manual Means(a) In area of non thorny jungle[SOR 2025-26][Item No. 2.1(i)] |
| 33 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrowpits with a lift upto 1.5m,transportingtosite,spreading,grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5Private Land[SOR 2025-26][Item No. 3.4(i)] |
| 34 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land[SOR 2025-26][Item No. 3.14(i)] |
| 35 | Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For Grading II Material[SOR 2025-26][Item No. 4.1 A(ii)] |
| 36 | WBM Grading 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(ii)] |
| 37 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(iii)] |
| 38 | Prime Coat :Low porosityProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502[SOR 2025-26][Item No. 5.1 (i)] |
| 39 | Tack CoatProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.[SOR 2025-26][Item No. 5.1 (ii)] |
| 40 | Mix Seal SurfacingProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509II By Mechanical MeansType B ii) Bitumen (S-65)[SOR 2025-26][Item No. 5.11 / I / A (i)] |
| 41 | Reinforced cement concrete M15 grade Kilometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and Technical specification Clause 1703 Ordinary K.M. stone (precast)[SOR 2025-26][Item No. 10.10 (ii)] |
| 42 | Reinforced cement concrete M15 grade Hectometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing &Technical specification Clause 1703 (iii) 200 mt stone (precast) [SOR 2026-26][Item No. 10.10 (iii)] |
| 43 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801.600 mm Equilateral [SOR 2026-26][Item No.10.2 / A-ii ] |
| 44 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801Stop Sign [600mm -Cricular] [SOR-2025-26][Item no. 10.2 / A1-iii] |
| 45 | TITLE INFORMATION BOARDProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1[SOR-2025-26][Item no. 10.16] |
| 46 | Providing and Fixing PMGSY Logo Board at finishing point of RoadProviding and fixing of typical PMGSY Logo board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx260cm above G.L.),(Size of board 1x 85cmx85cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. As Per Analysis |
| 47 | Providing and Fixing Citizen information Board of PMGSY Project(RCC)\\"A\\"Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint.As per Analysis |
| 48 | Providing and fixing of typical PMGSY Maintenance information sign board as per MORD specifications and drawing including painting and lettering and fixing in ground 600mm x 600mm x 750mm CC including painting two course and lettering.As Per Analysis |
| 49 | Rumble StripsProvision of 15 n0s.rumble strips covered with premix bituminous carpet,15.2 mm high at centre,250mm wide placed at 1m centre to centre at approved location to control speed, marked with white strips of road marking paint.The rate per sqm of premix carpet and road marking may be adopted from Chapters 5&10 respectively for the quantities calculated from approved drawings.[SOR-2025-26][Item no. 10.18] |
| 50 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New WorkPainting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702[SOR-2025-26][Item no. 10.8] |
| 51 | Cross Drainage WorksExcavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.[SOR 2025-26][Item No. 9.1 & 11.1 / I (i)] |
| 52 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203With natural Gravel, P.C.C Grade M 10, Nominal mix 1:3:6[SOR 2025-26][Item No. 9.7 / 11.4 / II / A / (i)] |
| 53 | Type B (First Class) Bedding Laying (FirstClass) bedding on well compacted sand, moorum as per Clause 1105 (ii)[SOR 2025-26][Item No. 9.2 (B) (i)] |
| 54 | Providing and laying reinforced cement concrete pipe NP3 for culverts as per design on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.(ii) 1000 mm dia[SOR 2025-26][Item No. 9.3 (ii)] |
| 55 | Providing concrete for plain / reinforced concrete in foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203With natural Gravel PCC Grade M 20Nominial mix (1:2:4) [SOR 2025-26][Item No. 11.4 / II / C / i] |
| 56 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204With Natural Gravel RCC Grade M 20, For height upto 5 m[SOR 2025-26][Item No. 12.5 / II / C (i)] |
| 57 | Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3[SOR 2025-26][Item No. 14.8] |
| 58 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand filling[SOR 2025-26][Item No. 11.2 (I)] |
| 59 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material tobe used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness asper Technical Specification Clause 201.(i) By Manual Means(a) In area of non thorny jungle[SOR 2025-26][Item No. 2.1(i)] |
| 60 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrowpits with a lift upto 1.5m,transportingtosite,spreading,grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5Private Land[SOR 2025-26][Item No. 3.4(i)] |
| 61 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land[SOR 2025-26][Item No. 3.14(i)] |
| 62 | Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For Grading II Material[SOR 2025-26][Item No. 4.1 A(ii)] |
| 63 | WBM Grading 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(ii)] |
| 64 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means[SOR 2025-26][Item No. 4.8 B(iii)] |
| 65 | Prime Coat :Low porosityProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502[SOR 2025-26][Item No. 5.1 (i)] |
| 66 | Tack CoatProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.[SOR 2025-26][Item No. 5.1 (ii)] |
| 67 | Mix Seal SurfacingProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509II By Mechanical MeansType B ii) Bitumen (S-65)[SOR 2025-26][Item No. 5.11 / I / A (i)] |
| 68 | Reinforced cement concrete M15 grade Kilometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and Technical specification Clause 1703 Ordinary K.M. stone (precast)[SOR 2025-26][Item No. 10.10 (ii)] |
| 69 | Reinforced cement concrete M15 grade Hectometre stone /local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing &Technical specification Clause 1703 (iii) 200 mt stone (precast) [SOR 2026-26][Item No. 10.10 (iii)] |
| 70 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801.600 mm Equilateral [SOR 2026-26][Item No.10.2 / A-ii ] |
| 71 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801Stop Sign [600mm -Cricular] [SOR-2025-26][Item no. 10.2 / A1-iii] |
| 72 | TITLE INFORMATION BOARDProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1[SOR-2025-26][Item no. 10.16] |
| 73 | Providing and Fixing PMGSY Logo Board at finishing point of RoadProviding and fixing of typical PMGSY Logo board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx260cm above G.L.),(Size of board 1x 85cmx85cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. As Per Analysis |
| 74 | Providing and Fixing Citizen information Board of PMGSY Project(RCC)\\"A\\"Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint.As per Analysis |
| 75 | Providing and fixing of typical PMGSY Maintenance information sign board as per MORD specifications and drawing including painting and lettering and fixing in ground 600mm x 600mm x 750mm CC including painting two course and lettering.As Per Analysis |
| 76 | Rumble StripsProvision of 15 n0s.rumble strips covered with premix bituminous carpet,15.2 mm high at centre,250mm wide placed at 1m centre to centre at approved location to control speed, marked with white strips of road marking paint.The rate per sqm of premix carpet and road marking may be adopted from Chapters 5&10 respectively for the quantities calculated from approved drawings.[SOR-2025-26][Item no. 10.18] |
| 77 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New WorkPainting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702[SOR-2025-26][Item no. 10.8] |
| 78 | Cross Drainage WorksExcavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.[SOR 2025-26][Item No. 9.1 & 11.1 / I (i)] |
| 79 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203With natural Gravel, P.C.C Grade M 10, Nominal mix 1:3:6[SOR 2025-26][Item No. 9.7 / 11.4 / II / A / (i)] |
| 80 | Type B (First Class) Bedding Laying (FirstClass) bedding on well compacted sand, moorum as per Clause 1105 (ii)[SOR 2025-26][Item No. 9.2 (B) (i)] |
| 81 | Providing and laying reinforced cement concrete pipe NP3 for culverts as per design on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.(ii) 1000 mm dia[SOR 2025-26][Item No. 9.3 (ii)] |
| 82 | Providing concrete for plain / reinforced concrete in foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203With natural Gravel PCC Grade M 20Nominial mix (1:2:4) [SOR 2025-26][Item No. 11.4 / II / C / i] |
| 83 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204With Natural Gravel RCC Grade M 20, For height upto 5 m[SOR 2025-26][Item No. 12.5 / II / C (i)] |
| 84 | Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3[SOR 2025-26][Item No. 14.8] |
| 85 | Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand filling[SOR 2025-26][Item No. 11.2 (I)] Please Enable Macros to View BoQ information |
