Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+) Less (-) Tender Inviting Authority: Chief Engineer, Civil Engineering Group, GSO, Kalpakkam. Name of Work: Carpentry maintenance and other miscellaneous works at residential & non-residential buildings in Anupuram Township during the year 2026-2027. Tender No: GSO/CTC/CEG/311/2026 Name of the Bidder/ Bidding Firm / Company : PART-II (FINANCIAL BID) Note : 1) This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. 2) Bidders are allowed to enter the Bidder Name and Values only.3) Rates quoted should be inclusive of GST @ 18% and any other taxes as applicable. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item.No. Item Description Item Code / Make Quantity Units Estimated RateinRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE including all taxes in Figures to be entered by the Bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Rates in words Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Unit for Rate TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Attending day to day complaints in occupied houses on minor repair works in doors, windows, ventilators of various types by servicing the fittings and replacing the worn-out fittings if any, refixing the same, and also other carpentry related complaints if any etc., complete all as directed. [Note: 1) The rate quoted shall be for each door/window shutter.2) Furniture fittings if required will be supplied by the department at free of cost or paid under separate item.] |
| 3 | Attending minor repair works in doors, windows, ventilators of various types of vacant houses by servicing the fittings and replacing the worn-out fittings if any, refixing the same, and also other carpentry related complaints if any etc., complete all as directed. [Note: 1) The rate quoted shall be for each door/window shutter.2) Furniture fittings if required will be supplied by the department at free of cost or paid under separate item.] |
| 4 | Door's and Cupboards |
| 5 | Windows other than kitchen window |
| 6 | Windows at kitchen |
| 7 | Ventilators |
| 8 | Supplying and fixing glazed shutters having 65x32mm second class teakwood frames and 4mm thick clear/grounded glass for windows / ventilators including providing and fixing 19x12mm size teakwood beading for fixing glass, painting the new wood with two coats of synthetic enamel paint over a coat of primer etc., complete including removing the damaged window shutters, returning them to maintenance stores as per specifications. |
| 9 | Repairing the cupboard shutters by removing the shutters from the existing position with all furniture fittings, removing the damaged portion of panels from the shutters and replacing with 12mm thick Cement bonded particle board of make BISON or other approved equivalent make including cost of materials, cutting, finishing the edges, refixing the shutters in position with all existing fittings and fixtures, painting with two coats of synthetic enamel paint of approved colour over a coat of wood primer to match with the existing colour etc., all complete as per specifications and as directed by Engineer-in-charge. |
| 10 | Providing and fixing wardrobe shutters [single/double leaf] made out of 8mm thick cement bonded particle board of make Bison panel or other approved equivalent make panels with teakwood frame made out of 40x40mm second class teakwood scantling around and the lock rail shall be of 40x32mm at centre for each leaf, as per specifications including removing the old damaged door shutters and returning to GSO, civil maintenance stores etc., all complete and as directed by the Engineer-in-charge. |
| 11 | Supplying and fixing 20mm to 25mm thick both side polished cuddapah stone slabs for Shelves in Cupboard/Wardrobe/Shoe rack, etc., including fixing by cutting a chase of appropriate width with cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specifications and as directed by Engineer-in-charge.(Note: Cudappah stones shall be got approved by the Engineer before making bulk order) |
| 12 | Repairing the wooden partition, furniture's, pelmet, counter tops by removing the damaged portions of plywood, lamination, etc., and replacing with following materials of approved quality including cutting to required sizes, fixing, finishing to match with existing one, fixing all furniture fittings, painting, polishing etc., all complete as per specification and as directed by Engineer-in-charge. |
| 13 | 18mm thick Plywood |
| 14 | 12mm thick Plywood |
| 15 | 6mm thick Plywood |
| 16 | 1mm thick Lamination of Formica or Greenlam |
| 17 | Edge banding using 18mm wide PVC edge tape |
| 18 | Providing and fixing 18 mm thick, 150 mm wide pelmet made out of Second Class Teakwood planks including fixing in wall with 18mm thick teakwood brackets with suitable screws/ rawl plug, providing 20mm dia heavy duty quality anodized aluminium curtain rod of 2.5mm thick, polishing the all exposed surface with three coats of natural polishing with French/Touch wood polish, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 19 | Replacing worn-out / damaged aluminium hangers by supplying and fixing 12mm dia. Heavy quality anodised Aluminium Hangers of length not exceeding 650mm for wardrobes, etc., complete as directed by Engineer-in-charge. [Note: Removed old materials shall be returned to the GSO, Civil Maintenance stores.] |
| 20 | Reconditioning the existing teakwood panelled door shutters by replacing the damaged bottom rails with Second Class teakwood planks of upto 150-200mm wide 35mm thick and providing with 0.80mm (22 gauge) aluminium plain sheet at bottom on both sides to a height of 400mm including cost of teakwood, aluminium sheet, nails, screws and painting the same, etc., complete including and removing the old damaged door shutters and returning to maintenance stores etc., all complete and as directed by the Engineer-in-charge. |
| 21 | Repairing the damaged TW panelled door shutters by fixing 22 gauge Aluminium sheet on both sides at bottom of door shutters upto a height of 400mm including removing and refixing the shutters, cost of nails, painting two coats of synthetic enamel paint but excluding the cost of hinges which will be paid separately under relevant item. |
| 22 | Replacing the existing wood work by supplying, manufacturing and fixing of Second Class Teakwood frames and architraves for doors, windows, ventilators, etc., made out of best quality Class-II teakwood scantlings with necessary holdfast/anchor fasters, wooden plugs and screws for fixing it to the various openings including removing the old door frame/shutter with all fittings, refixing the shutter to the new frame, finishing the sides with plastering white/colour washing to match with existing surface, painting the new wood with two coats of synthetic enamel paint over a coat of primer etc., and returning the retrieved old materials to GSO civil maintenance stores, etc., all complete as per the specifications and as directed by Engineer-in-charge. |
| 23 | Supplying, manufacturing and fixing of Teakwood frames with fly proof mesh shutter for balcony door, windows, ventilators etc., made out of best quality Class-II teakwood scantlings with necessary wooden plugs and screws for fixing it to the various openings including removing the existing architrave beading, fixing fly proof mesh shutters having 50 x 25mm teak wood main frames and shutter frame, Fly proof Stainless Steel (Grade 304) wire gauze of 0.4mm dia wire and 1.4mm aperture, providing and fixing 19x12mm size teakwood beading for fixing fly proof mesh, the frame colours to match with existing surface, painting the new wood with two coats of synthetic enamel paint over a coat of primer etc., and returning the retrieved old materials to GSO civil maintenance stores, etc. i) Fittings - Each shutter shall be fixed with the following hardware fittings.a) 3 Nos. of 75 mm long stainless steel butt hinges of approved make and bearing ISI mark with suitable stainless steel screws.b) Two numbers of 75mm long for windows (or) One numbers of 75mm and one number of 250mm anodised aluminium tower bolt of approved make and bearing ISI mark with suitable CP screws.c) One number of 100 mm long anodised aluminium D handle of approved make as per IS - 208 bearing ISI mark with suitable CP screws.Note: 1) All fittings, fly proof mesh, teak wood shall be got approved by the Engineer before making bulk order.2) The rate quoted shall be inclusive of supplying, manufacturing, fixing of frames and shutter with required hardware fittings as detailed above. 3) Balcony shutter shall be of folding type with required hardware fittings. |
| 24 | Applying Anti-termite chemical for teak wood frames by spraying or brushing with two coats of Dursphan/Durmat or other approved equivalent make of anti-termite chemical at the ratio of 1:19 [one part of chemical and 19 parts of kerosene] over the wood and contact masonry surface, etc., all complete as directed by the Engineer-in-charge. |
| 25 | Replacing the damaged glass of Chalk board by supplying and fixing with 5mm thick glass board of required size including removing the backing AC plain sheet, painting the glass with two coats of enamel paint, refixing the backing sheet and the entire unit shall be fixed to wall firmly along with frame with necessary screws, wooden portion shall be painted with two coats of synthetic enamel paint over a coat of primer if required etc., all completed as per drawing and as directed by the Engineer-in-charge. |
| 26 | Supplying and fixing 35mm thick solid teakwood panelled door shutters of single leaf/double leaves and shutter frame shall be made out of 125 x 35mm, bottom rail of size 250 x 35mm and lock rail of size 200 x 35mm with tongue and groove jointed panels with minimum 125mm width of equal panels of 25mm thick each and 5 x 3mm groove at front face using second class teakwood including making as per drawings for various structural openings, labour for fixing of furniture fittings, removing the old damaged door and returning them to GSO maintenance stores etc., all complete as per specifications and as directed by Engineer-in-charge. |
| 27 | Providing and fixing Door Safety chain of approved shape with SS304 grade chain and satin nickel polished of make Godrej or Prayag or other approved make including fixing as directed by Engineer-in-charge. |
| 28 | Providing and fixing 90mm anodised Aluminium hasp & staples of approved make including fixing with suitable screws. |
| 29 | Providing and fixing upto 75mm Stainless steel hasp & staples of approved make including fixing with suitable screws. |
| 30 | Providing and fixing IS:204 marked Aluminium tower bolts of make 'Classic or Crown' or approved equivalent make including anodised transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification. |
| 31 | 250 x 12mm |
| 32 | 150 x 12mm |
| 33 | 100 x 10mm |
| 34 | Providing and fixing IS:208 marked aluminium handles of 'Classic or Crown or Global' or approved equivalent make including anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary SS screws etc., all complete as per specification. |
| 35 | 125mm x 12mm dia. |
| 36 | 100mm x 10mm dia. |
| 37 | Providing and fixing 50mm long and 40mm dia. PVC solid door buffer with 75mm x 10mm SS screws and cup washers. |
| 38 | Providing and fixing anodised aluminium hook and eye of approved make with suitable screws. |
| 39 | Hook and eye 250mm |
| 40 | Hook and eye 75mm long |
| 41 | Providing and fixing 300mm long plate fixed with three / four prong type anodised aluminium robe hooks of approved make with suitable screws. |
| 42 | Providing and fixing IS : 12817 marked stainless steel butt hinges (Heavy weight) of make GARG or approved equivalent make including fixing with suitable stainless steel screws etc., complete. |
| 43 | 125 x 65 x 2.50mm |
| 44 | 75 x 47 x 2.50mm |
| 45 | Replacing the existing damaged window / ventilator glass panes by supplying and fixing in position 4mm thick plain/grounded glass with necessary teakwood beading, pin nails, putty, etc., by using the existing removed beading to the possible extent and supplying and fixing balance beading if any, including cost of beading, nails, putty, transporting the removed broken glass pieces and disposing safely at places as shown etc., complete as per specifications and as directed by the Engineer.-in-charge. |
| 46 | Window glass panes size upto 900 X 500mm |
| 47 | Window glass panes size upto 1200 X 500mm |
| 48 | Ventilator glass panes size upto 565X565mm/535X600mm/495X545mm |
| 49 | Louver glass of size 600 to 750mm long, 125mm wide |
| 50 | Providing and fixing SS body with satin nickel finish Door Viewer of make Godrej or Prayag or other approved make suitable for 35-40mm thick door shutters including fixing in door as directed by Engineer-in-charge. |
| 51 | Replacing the damaged existing mesh by providing and fixing of Fly proof Stainless Steel (Grade 304) wire gauze of 0.4mm dia wire and 1.4mm aperture on both sides of approved quality and make over Partly panelled Door / Grill door including fixing with second class Teak wood beading or Aluminium frame work, cost of screws, nails, rawl plug, etc., all complete as per specification. [Note: Cost of frame work i.e., Steel or wood or aluminium, will be paid for separately under relevant item.] |
| 52 | Supplying and fixing in position of Glass fibre fly proof mesh of make Saint Gobain or approved quality and make for existing uPVC windows / Ventilators including removing the damaged fly mesh and fixing new mesh over existing uPVC shutters using existing uPVC Profiles, EPDM gasket, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 53 | Supplying, fitting, fixing in position of 6mm thickness plain/grounded glass of \\"Saint Gobain\\" or approved equivalent make for doors, partition, windows, fixed glazing, louvers, etc., including fixing with putty, TW beading, neoprene gasket, etc., all complete as per drawing and specifications. |
| 54 | Modification of existing Glazed windows to accommodate 1.5 Ton Air conditioner by cutting the existing window and introducing 1300 to 1500mm long II class Teakwood of size 100x50mm horizontally and using the retrieved wood for vertical support, providing new shutter with 65x35mm frame work, 4mm thick sheet plain glass with necessary beading and new MS grill of existing pattern for side open portion including altering/fixing the existing shutter and grill of existing pattern to required shape using the dismantled materials wherever possible for top portion, providing 75mm long SS butt hinges, 100mm aluminium D handles, 100mm aluminium tower bolts, 230mm MS hooks with necessary screws, painting with two coats of synthetic enamel paint to match with the existing surface over a coat of wood primer etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 55 | Replacing the existing damaged False ceiling tiles by providing and fixing in position 12mm thick Semi perforated particle board ceiling tiles of make Anchor design 'C' or approved equivalent including removing the damaged tiles, fixing new tiles with required screws, cost of painting ceiling tiles with one coat of cement primer and two coats of acrylic emulsion paint for exposed faces, etc., complete at all lifts including scaffolding as directed by the Engineer-in-charge.[Note: Damaged tiles shall be returned to GSO, Civil maintenance stores.] |
| 56 | Replacing the existing damaged False ceiling tiles with Lay in Perforated metal ceiling System of Armstrong or approved equivalent make using 600x600mm Lay in tiles of pre coated galvanised steel in 0.5 mm thickness of approved colour with standard perforation of 2.5mm dia and open area of 16% with Soundtex acoustical fleece glued to the back of the tile, laid over grid system of make Armstrong suspension system or other approved system with 15mm wide T - section flanges having rotary stitching on the Main Runner suspended from the ceiling at required intervals including providing suitable opening for mounting of lighting fixtures & fittings, loud speakers, fire alarm system component and lighting system, also provision for Trap doors where ever required with necessary opening & locking arrangements for the accesses to air-conditioning Duct etc., all complete as per specification and as directed by Engineer.[Note: Damaged tiles, runners, tees shall be returned to GSO, Civil maintenance stores.] |
| 57 | Replacing the old night latch by supplying and fixing in position of Ultra XL+ Vertibolt of \\"Godrej\\" / (1CK -Texture Brown) or approved equivalent make operable by key from outside and by knob from inside with four keys including removing the old night latch and returning the damaged night latch to GSO stores, fixing the new vertibolt using retrofit adopter over the existing night latch hole, etc., all complete as directed by Engineer-in-charge. (Note: The lock shall be got approved by the Engineer before making bulk order) |
| 58 | Repairing and refixing of PVC shutters including removing the shutter, jointing the loose joints with PVC solvent or synthetic resin adhesive & screws, refixing the shutter, etc., all complete as per specification and as directed by the Engineer-in-charge. (Note: Cost of furniture fittings will be paid for separately under relevant item.) |
| 59 | Supplying and fixing of factory made Solid WPC door frame having density of 850 - 950 Kg/Cum, water absorption less than 1% of approved make with suitable rebate for shutters including the joints shall be mitred & Jointed with self driven self tapping screws of size 75 mm x 4 mm and made by SP 5 epoxy seal and fevikwik / solvent, fixing the frame to wall with suitable dia & length anchor fastener, etc., including removing the existing damaged teak wood frame, finishing the door and wall joints using CM 1:5 plaster to match with existing surface and painting with two coats of acrylic emulsion paint, etc., all complete as per manufacturer specifications and as directed by the Engineer-in-Charge. |
| 60 | Supplying and fixing in position single leaf factory made flush door shutter of 25 mm thick PVC integral foam sheet of make M/s. Jain Irrigation Systems Ltd. (Ex-cell sheet) or SINTEX or other equivalent approved make of white colour for flush door shutter including providing recessions for hinges, fixing with following fittings over the granite door frame using required fasteners, finishing all edges with mixture of PVC powder & solvent for smooth finish, etc., all complete as per specification and as directed by the Engineer-In-Charge.The door shutter shall be fixed with the following hardware fittings: -a) 4 Nos. of 75 mm long medium weight stainless steel butt hinges of GARG brand bearing ISI mark with suitable stainless steel screws.b) Two numbers of 125mm long anodised Aluminium D handle of make Classic/CLASSIC or approved equivalent as per IS - 208 bearing ISI mark with suitable CP screws.c) Two numbers of 75mm long anodised aluminium baby latch type tower bolt with suitable CP screws.d) One number of 50mm long solid PVC door buffer with 75mm long CP screws.Note: 1) All furniture fittings shall be of approved quality and make.2) The rate quoted shall be inclusive of fixing of frames with fisher screw and shutter with required hardware fittings as detailed above.3) The PVC Integral Foam shall be factory manufactured solid section of light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides. The sheet shall have density of 500 - 600 Kg/Cum, water absorption less than 1% and tensile strength greater than 11 MPa.4) The entire door shall be jointless shutter. 5) The sizes shall be approximately 700 mm x 2100mm, however exact dimensions shall be measured at site before manufacturing. |
| 61 | Repairing the existing wooden door/window shutters against the complaint of non-operable condition by removing the door/window/ventilator shutters of various sizes from their position, removing and refixing the window / ventilator grills wherever necessary, plaining the edges of the shutters / fixing necessary teak wood reapers using suitable adhesive to minimise the gap between shutter and frame as required, applying suitable oil to the furniture fittings for smooth functioning and refixing the shutters to their original position using available/new screws and making the shutters in good working condition etc., complete all as directed by the Engineer-in-charge.(Note :The rate shall be inclusive of the cost of teak wood reapers, adhesives, screws as required.) |
| 62 | Door shutters at all lifts |
| 63 | Window/Ventilator shutters at all lifts |
| 64 | Supplying, fabricating and fixing Steel Grills of required pattern and size for Windows/Ventilators, Staircase Hand Rails, etc., fixed to openings/wooden frames at site, comprising of MS square bars/MS rounds/MS flats, etc., including fixing with necessary wood screws for fixing grills / by welding in steel windows, painting with two coats of anti corrosive paint of approved colour and make over a coat of red oxide zinc chromate primer/ zinc phosphate primer, etc., all completed as per specification. (Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedment's for fixing the steel works.) |
| 65 | Providing and fixing in position of built in CP Brass combi pack mortice latch and lock with 6 levers and a pair of decor brass / crystal brass/Satin lever handles of \\"Godrej\\" or approved equivalent make with keys including fixing in flush door/Aluminium door with necessary screws, removing the old mortice latch and returning the damaged mortice lock to Civil maintenance stores, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 66 | Attending complaints of Night Latch / Ultra Vertibolt door locks on an emergency basis in residential quarters of various types, including attending works at all levels/floors. The work shall be carried out by engaging qualified carpenters and shall include necessary adjustments, minor repairs, and servicing of door locks etc., complete in all respects as per specifications and as directed by the Engineer-in-Charge. |
| 67 | Providing and fixing heavy quality 600mm CP Towel rail of Jaguar [Continental Series] or approved equivalent make with wall flange including suitable CP screws all complete as per specifications and as directed by Engineer-in-charge. |
| 68 | Providing and fixing 6mm thick bevelled edge mirror of approved size and shape of make Saint Gobain or other approved equivalent make including making bevelled edge moulding, making minimum 4 holes per mirror to fix the mirror, fixing the mirror using approved fasteners and fixing buttons, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 69 | Providing and fixing 5mm thick mirrors of \\"SAINT GOBAIN\\" or approved equivalent make of approved size backed with 4mm thick AC sheet or marine plywood including 30x20mm aluminium frame works, painting with two coats of enamel paint over one coat of primer for backing sheet, fixing in frame work with gasket, fixing firmly against brick wall with suitable clamps, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 70 | Providing and fixing in position of 5mm thick looking mirror of make 'SAINT COBAIN' or approved equivalent make of an overall size of 600 x 450mm with fibre reinforced plastic frame with gasket and PVC sheet backing with screw slots two number each on horizontal and vertical sides and fixing to the wall with necessary screws etc., complete as directed by Engineer-in-charge. |
| 71 | Repairing the existing 5mm thick looking mirror with new gasket including removing and refixing the backing sheets, fixing to the wall with necessary screws, etc., all complete as directed by Engineer-in-charge. |
| 72 | Providing and fixing 14-16mm thick table rubbed White Agaria Marble Stone slab of 600x125mm size and fixed in shelves, above wash basin, bath, etc., including cutting a chase of appropriate width with chase cutter, embedding (min 50mm) the stone into the chase with epoxy grout or with cement concrete 1:2:4 or white cement, finished smooth, rounding the exposed edges, polishing and including removing the existing glass shelf and CP brackets handing over to GSO stores, etc., all complete as per specification and as directed by Engineer-in-charge. (Note: Size of the slabs indicated are the exposed area of shelves i.e., excluding embedded area.) |
| 73 | Providing and fixing Aluminium curtain rod of 25mm aluminium hollow tube with 2mm wall thickness including providing end brackets, fixing over window/openings, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 74 | Refixing the existing PELMET, by drilling and fixing the pelmets in position with rawl plugs in masonry/concrete with necessary screws etc., as directed by the Engineer In Charge. |
| 75 | Repairing the wooden TW Dining tables by repairing all the joints using nails / screws, synthetic adhesives, etc., all complete as directed by the Engineer In Charge. |
| 76 | Repairing the wooden TW chairs by repairing all the joints using nails / screws, synthetic adhesives, etc., all complete as directed by the Engineer In Charge. |
| 77 | Repairing the wooden Teak wood Dual desk in school premises by repairing the damaged portions by nailing, fevicoling the joints and polishing with one coat, including cost of nails, fevicol etc., all as directed.[Note: Cost of Teak wood planks, scantling will be paid for separately under relevant item.] |
| 78 | Supplying and fixing of second class Teak-wood planks for Dual desk in school premises including removing the damaged writing/sitting planks, making surface smooth and matching existing colour with suitable sand papers, applying filler / sealer coat, polishing the wood surface with two coats of touch wood of approved make etc., all complete as per standard specifications and as directed by the Engineer-In-Charge.[Note: The Planks without joint shall be used for slanting Desk top and one longitudinal half lap joint shall be allowed for seating desk.] |
| 79 | Polishing the existing notice board, wall panelling, wooden handrails with one coat of touch wood of approved make including preparing the surfaces, cost of all materials, labours, all complete as per standard specifications and as directed by the Engineer In Charge. |
| 80 | Providing polishing with 2 coats of Touch wood polish of approved make at all elevations over wood work including all materials, scaffolding, preparation of surface, etc., all complete as per specification and as directed by the Engineer In Charge. |
| 81 | Painting all types of metal surface with One coat of PU finish paint of make MRF (Metal coat) or other approved make over one coat of epoxy zinc phosphate primer of make MRF (Metal coat) or other approved make and using thinner 1110 Ep for epoxy primer and thinner for finish for metal coat paint including preparation of surfaces, applying primer coat, applying metal paste wherever required, making surface smooth by sanding, applying one coat of PU finish paint, scaffolding etc., all complete at all lifts as per manufacturer instructions and specifications and as directed by Engineer-In-Charge. |
| 82 | Painting with one coat of synthetic enamel paint of approved make and colour over existing wooden / steel surfaces, pipe lines, etc., including preparation of surfaces as per standard specifications, cost of material, all complete as per specifications and as directed by the Engineer In Charge. |
| 83 | Painting for wood work with two coats of synthetic enamel paint of approved colour and make over a coat of primer over new wood work suitably prepared for receiving the primer and paint by scraping, rubbing, applying wood filler, wood putty, making surface smooth, etc., all complete as per specifications and as directed by the Engineer In Charge. |
| 84 | Supplying and fixing in position single leaf/double leaves of following thick non decorative type factory made Wood Polymer Composite (WPC) solid door shutters of approved make having density of 600 - 800 Kg/Cum, water absorption less than 1% and tensile strength greater than 12 MPa including providing aluminium lipping / Teak wood all-round if required, fixing the lipping with suitable adhesive, fixing required hardware fittings, fixing door using required screws, etc., all complete as per specifications and as directed by Engineer-In-Charge.[Note: Cost of Door frame, hardware fittings and Aluminium / Teak wood lipping will be paid for separately under relevant item.] |
| 85 | 35mm thick WPC door |
| 86 | 30mm thick WPC door |
| 87 | Providing and fixing Anodised aluminium hanging type door Twin rubber stoppers of required colour or shade including fixing with necessary screws etc., all complete as per specifications. |
| 88 | Servicing the steel windows/ ventilator shutters of make seccolor by removing the shutters from the existing position with all furniture fittings and removing the damaged/broken stays, replacing with new stays/hinges/handles/handle receiver etc., and refixing the shutters to the windows including the cost of screws, applying grease, oil etc., all and as directed. Note: 1) Cost of SS/MS friction stays/Handle/ Handle receiver will be paid under relevant item. 2) Rate shall be quoted for servicing one shutter. |
| 89 | Supplying and fixing in position of the following hardware fittings for steel windows / ventilators of make EBCO or other approved equivalent make including removing the damaged fittings and fixing with new fittings as directed by the Engineer-in-charge. |
| 90 | Window Handle with receiver |
| 91 | SS Friction stays (255mm) |
| 92 | Servicing the uPVC windows / ventilator shutters by removing the shutters from the existing position with all furniture fittings and removing the damaged/broken rollers, replacing with new rollers/handles/locks etc., and refixing the shutters to the windows including the cost of screws, applying grease, oil etc., all and as directed. (Note: 1) Cost of friction rollers/Handles/ locks will be paid under relevant item. 2) Rate shall be quoted for servicing one shutter.) |
| 93 | Servicing the uPVC Door shutters by removing the shutters from the existing position including all furniture fittings and removing the damaged/broken fittings, replacing with new fittings and refixing the shutters to the frame with functional position with applying grease, oil, screws, etc., all and as directed by Engineer -In - Charge. Note: 1) Cost of Hinges/ locks will be paid under relevant item. 2) Rate shall be quoted for servicing one shutter. |
| 94 | Supplying and fixing in position the following hardware fittings for uPVC windows / ventilators of make NCL Windows or other approved equivalent make including removing the existing fittings, fixing with new fittings, etc., as directed by the Engineer-in-charge. |
| 95 | Single roller with grooves |
| 96 | Window handle for Casement windows |
| 97 | Window handle touch lock for sliding window |
| 98 | Window hinges |
| 99 | uPVC door hinges |
| 100 | uPVC door lock |
| 101 | Repairing of break down rolling shutters as and when required including providing scaffolding, removal of shutters, hoods, checking and repairing, replacing the damaged spare parts like springs, worm etc., refixing the shutters in original position and making the shutters in good working condition all as directed by the Engineer-in-charge. [Note: Spare parts will be paid for separately under relevant items] |
| 102 | Servicing the rolling shutters wherever required including removing hood cover, applying greasing, cleaning and making the shutters in good working condition, etc., all as directed by the Engineer-in-charge. [Note: The rate shall quoted for greasing one rolling shutter] |
| 103 | Servicing the Security Steel gates and wicket gates along the security isolation compound wall including applying grease for hinges, oiling the locks, cleaning, making the gates to operate smoothly, etc., all complete as directed by Engineer-in-charge. [Note: Rate shall be quoted for servicing one shutter.] |
| 104 | Providing and fixing following parts for Rolling shutter including scaffolding, fixing, greasing etc., |
| 105 | Spring |
| 106 | Worm gears |
| 107 | 40mm dia MS pipe |
| 108 | Providing and fixing in position universal Hydraulic door closer bearing ISI mark of EVERITE/GODREJ or approved equivalent make as per IS:3564 (Type-B No.2) including fixing as per specifications. |
| 109 | Providing and fixing Drapery rods (curtain rod) of approved equivalent make of approved colour made up of 25-28mm aluminium rods coated with Teflon and solid paints painted with MRF Vapocure technology for colour retention, stain and chalk resistance including providing ornamental end brackets, finials and rings in matching colours, fixing over window/openings, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 110 | Providing and fixing in position Aluminium partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows north light glazing, sliding shutter 'E' Channel etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of \\"JINDAL\\" or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge.Note:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc., 2. Glazing, particle boards, aluminium grills, mesh etc., will be paid separately under relevant items.3. All fittings except under Note-1 will be paid separately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost.5. The aluminium section shall be anodized with \\"MATT FINISH\\" (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge. |
| 111 | Providing and fixing of 10mm thick aluminium grill \\"DECOGRILL\\" or approved equivalent make to the window, ventilators, wall spans etc., in approved colour, shade, design, and size anodizing (15 microns) to match with the colour of window frame from inside or from outside including fixing windows, ventilators, wherever required, cost of all other incidental, etc., all complete as per drawing and as directed by the Engineer-in-charge. (NOTE: The cost of aluminium frame work and snap beading will be paid separately under relevant item.) |
| 112 | Providing and fixing in position of Curtain Track of make Veevaa or other approved equivalent make of powder coated aluminium profile of size 40mmx16mm with smooth and even groove be mounted on walls with suitable wall brackets, the track shall be flexible to be bend at site, each track shall be hanged by the supports with at least 2 ceiling supports, connecting the adjacent tracks with suitable connectors and fasteners, rolling the runner cum hooks in to the groove not less than 3 no's per running feet, fixing the track railing with necessary accessories wall brackets, connectors, runners & suspender set with required height (slab bottom to false ceiling top), drilling holes in floor/walls, embedding / grouting with suitable grouting materials and suitable arrangements, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 113 | Providing and fixing Vertical curtains of Veevaa or approved equivalent make of fabric finished net of 300mm at the top for proper ventilation and including fixing in curtain track properly, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 114 | Repairing the Sliding shutters of Shoe / cupboard rack by removing the damaged shutters from the existing position with all furniture fittings and replacing with 8mm thick Cement bonded particle board of make BISON or other approved equivalent make including cost of materials, cutting, finishing the edges, refixing the shutters in position with all existing fittings and fixtures, painting with two coats of synthetic enamel paint of approved colour over a coat of wood primer to match with the existing colour etc., all complete as per specifications and as directed by Engineer-in-charge. |
| 115 | Providing and fixing in position of 8mm thick Cement bonded particle board of `Bison Lams' or approved equivalent make panels for door shutters, partitions, cupboard shutters, sliding shutters, mirror back side support etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame/teak wood frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, mirror etc., all as per specification and as directed by the Engineer-In-Charge. (Note:- Aluminium frame/teak wood frame will be paid for separately under relevant item.) |
| 116 | Providing and fixing in position of 12mm thick Cement bonded pre-laminated particle board of `Bison Lams' or approved equivalent make panels prelaminated with decorative lamination on both sides for door shutters, partitions, cupboard shutters, sliding shutters, etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, etc., all as per specification and as directed by the Engineer-In-Charge. (Note:- Aluminium frame work will be paid for separately under relevant item.) |
| 117 | Supplying and fixing of Green Chalk Writing Board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made from high quality hard dry wipe Green chalk laminate over 10mm thick MDF board framed with 25mm thick double sided curved heavy anodized aluminium sections and Chromium plated plastic corners including backed with PVC sheet, providing concealed clamps at the back side for wall mounting, providing and fixing of chalk tray at bottom side, etc., complete. |
| 118 | Supplying and fixing of Notice board open type of approved size of make School needs or Corporate Concepts or Alkosign made from high quality 10mm thick soft board covered with colour (Blue / Maroon) blazer cloth and framed with 25mm thick double sided curved heavy anodized aluminium sections and Chromium plated plastic corners including backed with PVC sheet, providing concealed clamps at the back side for wall mounting, etc., complete. |
| 119 | Providing and fixing Sliding glass door Notice board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made up of anodized aluminium frame work along with 5mm thick clear float glass of “SAINT COBAIN” or approved equivalent make for sliding door including providing sliding arrangement, star locks, 12mm thick soft board covered with colour (blue / maroon) blazer / flannel cloth backed with PVC sheet, providing clamps at the back side for wall mounting, etc., all complete as directed by Engineer-in-charge. |
| 120 | Repairing, re-aligning and making good of aluminium doors, windows by removing making all modification and refixing in its original position including servicing and replacing gaskets, cleats, pins etc., wherever necessary etc., all as directed. (Note: The Rate quoted shall be for each shutter) |
| 121 | Aluminium Doors |
| 122 | Aluminium Windows |
| 123 | Providing and fixing Stainless steel Roller wheels of approved quality and make for sliding door shutters including fixing as directed by Engineer-In-Charge |
| 124 | Providing and fixing Sliding window latch for sliding windows of make EBCO or other approved make including fixing with necessary screws as directed by the Engineer-in-charge. |
| 125 | Providing and fixing double action hydraulic floor spring of \\"HARDWYN\\" or \\"GODREJ\\" or approved equivalent make with ISI mark, pivoting and all other arrangements including cost of cutting floor, SS cover plates with brass pivots & other necessary accessories required for the work to facilitate smooth operation of the door shutter etc., all complete as directed by the Engineer-in-charge. |
| 126 | Providing and fixing Star lock for notice boards of approved make including fixing with necessary screws as directed by the Engineer-in-charge. |
| 127 | Providing and fixing in position of built in Mortice lock with pair of key of \\"GODREJ\\" or approved make for aluminium doors including cutting the frame and fixing with necessary screw etc., complete all as directed by Engineer. |
| 128 | Providing and fixing in position of dead lock with pair of key of \\"DOORMA\\" or approved make for Steel flush doors including cutting the frame and fixing with necessary screw etc., complete all as directed by Engineer. |
| 129 | Providing and fixing Steel windows with 10mm square guard bars at equal intervals Fully glazed steel Windows, Top Hung Ventilators, etc., of make NCL-Seccolor (Ajantha) or Elixir or other approved equivalent make fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.60 mm as detailed below:-Paint specifications:- Coated Sections shall be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick.Dimensions of Sections:- Section for Shutter shall be of 46mm x 46mm and External Frame should be of 46mm x 52mm. Section for Glass Beading shall be of 18mm x 25mm and center mullion shall be of 46mm x 70mm.Fixing Details: The frame & Shutter Sections shall be cut to length and mitre joined with Corner Bracket made of CRCA electroplated. Mullion Section shall be joined with Frame/Mullion using Nylon Mullion Cap Ethyl Propylene Diamine Monomer (EPDM) Gasket shall be used all around glass in shutter, between frame and glazed shutter and both sides of fixed glass.Accessories: SS friction hinges, Concealed tower bolts, Handle made of high grade Aluminium powder coated with nylon receiver, etc., Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner brackets made of CRCA with zinc phosphating. Mullion caps made of Glass filled nylon. |
| 130 | Glass:- Glass shutter and fixed glass portions should be provided with a glass of 5mm Plain Float Glass of make saint gobain or other approved make.Window Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.Grill: Windows should be provided with Grill made of 10 mm Sq. MS Bars welded at equal intervals of not more than 150 mm center to centre to 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 131 | Fabrication and fixing of doors, windows, ventilator frames, window shutters, ventilator shutters using the available old wood by cutting to required length, jointing, fabricating to required size and fixing with necessary hold fasts including removing the old painting, removing the damaged wood works, finishing the wall surfaces, white washing, applying two coats of synthetic enamel paint over a coat of wood primer, etc., complete all as directed by Engineer-in-charge. |
| 132 | Door frames |
| 133 | Window frames |
| 134 | Ventilator frames |
| 135 | Window shutters |
| 136 | Ventilator shutters |
| 137 | Providing and fixing Telescopic drawer slides (Ball bearing drawer slides) for Drawer guides of make EBCO (STDS) or Godrej or approved equivalent make made up of C.R.C.A sheet metal with zinc plating and steel chrome plated ball bearing with detachable inner slides including fixing for drawer sides with suitable screws as directed by the Engineer-In-Charge. |
| 138 | 300mm Long |
| 139 | 550mm Long |
| 140 | Providing and fixing of following furniture fittings of make EBCO (STDS) or Godrej or approved equivalent make including fixing for locks with suitable screws etc., as directed by the Engineer-In-Charge. |
| 141 | Multipurpose furniture lock with duplicate keys |
| 142 | Drawer cupboard lock (75mm) with duplicate keys |
| 143 | Providing and fixing Vertical blinds of Vista Levelor or Marvel approved equivalent make with vanes of 100mm width made of non woven polyster fabric which are suspended from the stilt travellers by self aligning vanes hooly of effective optimized system, vanes shall be coupled together by means of bead chain pivotaly attached by closing to each side of each weight including the cost of blinds, fixing in slim aluminium head railing, runners, spacers, control units, other incidental charges, etc., all complete as per specification and as directed by Engineer. [Note :- Sample shall be got approved by the Engineer before making bulk order.] |
| 144 | Providing and Fixing Homogeneous PVC sheet, 2mm thick, conforming to IS:3462 latest edition in flooring and skirting (Polyfloor or approved equivalent make) in approved pattern, colour & shade on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S -758, or Fevicol SR 998, or approved equivalent including cleaning & preparation of surface, levelling small undulations with plaster of paris if required , rolling with light wooden roller weighing about 5 kg all complete all as per specification and as directed by the Engineer-in-Charge Note: The sample tile shall be got approved by the Architect/Engineer before procurement. |
| 145 | Providing and fixing double scaffolding system (cup lock type) on the exterior side at all height made with 40mm diameter M.S. tube spaced @ 1.5m centre to centre at both horizontal and vertical tubes, joining with cup and lock system with M.S.tube, M.S.tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners connection with the building, etc., Wherever required for the inspection of work at required location with essential safety features for the workmen, etc., complete as per directions and approval of Engineer-in-charge. (Note: The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.) |
| 146 | Providing and fixing M10 expansion anchor fasteners of make Hilti or other approved make in RCC/ brick masonry at all lifts including drilling hole using hammer drilling or diamond core drilling, cleaning the hole using hand pump for blowing out dust, setting the anchor in position, checking the anchor setting, fixing the steel members with approved thickness of washer and nut, checking the installation, etc., complete all as per manufacturer specifications and as directed by the Engineer-in-charge. |
| 147 | M10 x 153 stud anchor with effective anchorage depth of 80mm of make Hilti [HSA-R-(SS316)] or other approved make for RCC members. |
| 148 | M10 x 140 stud anchor with effective anchorage depth of 70mm of make Hilti [HRD-CR-(SSA4)] or other approved make for brick members. |
| 149 | Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on surfaces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-incharge. |
| 150 | Filling the gap between windows / ventilators and wall jambs with CM and finishing the edges with silicon sealant of approved make at all levels including filling the inner gap alround with CM without causing any damages to the window / glass, finishing the joint with silicon sealant using injecting guns, etc., all complete per specifications and as directed by Engineer-in-charge. |
| 151 | Providing and fixing Dual Reflective Sun Control Film of Garware or approved equivalent make over the existing windows including cleaning the glass, pasting the films over glass without void / air gaps using approved adhesive, cleaning, etc., all complete as per manufacturer specification and as directed by Engineer-In-Charge. |
| 152 | Supplying and fixing of wall mounting Letter box made from ABS plastic of size not less than 318mm (H) x 280mm (W) x 80mm (D) of make SDA Plast (Lamba's) or other approved make of approved colour including fixing printed stickers of flat numbers, locking facilities, fixing in wall using rawl plug and screws, etc., all complete as directed by Engineer-In-Charge. |
| 153 | Refixing of structural glazing with 5mm thick Toughened glass (semi unitised system - all panels fixed) using retrieved aluminium frame work including collecting the aluminium frame work from GSO stores, straightening the profiles, fixing the aluminium/GI cleats using M10 anchor fasteners in line and level, fixing the glass panels using double side cross linked polyethylene spacer tap (12x6mm thick) and structural sealant (GE Ultra glaze SSG 4000 or Dow Corning 795/995 or Wacker SG20 or other approved make) in such a way as to transfer the dead weight of the glass on to the mainframe so as to avoid undue stress on the structural sealant, the glazed panels after suitable curing in dust free environment shall be fixed on to mainframe from the exterior from the out side especially in spandrel areas, including sheet metal screws, 'L' angles, GI brackets, anchor bolts, etc. all complete as directed by the Engineer-in-Charge.Note :- 1) Required retrieved old Aluminium profiles and glass will be issued by Department at free of cost. Any new aluminium profiles and glass required will be paid for separately under relevant item.2) The cost of M10 anchor fasteners and scaffolding will be paid for separately under relevant items. |
| 154 | Supplying, fitting, fixing in position of 5mm thickness Toughened glass of approved colour of \\"Saint Gobain\\" or approved equivalent make for structural glazing including fixed over aluminium frame work of approved size and design, fixing the glazed panels using double side cross linked polythene spacer tape (12mmx6mm thick Norton spacer tape) and structural sealant (GE Ultra glaze SSG 4000 or Dow Corning 795/995 or Wacker SG20 or other approved make) in such a way as to transfer the dead weight of the glass on to the mainframe so as to avoid undue stress on the structural sealant, the glazed panels after suitable curing in dust free environment shall be fixed on to mainframe from the exterior from the out side especially in spandrel areas, etc. all complete as directed by Engineer-in-Charge. |
| 155 | Repairing the existing false ceiling grid system including removing the damaged tiles/grid system, refixing the grid system, refixing the grid system after straightening the runner/tees in line and level using required fasteners, the hanger rods holding the main runners shall be tightened to maintain line and level, refixing the ceiling tiles after fixing the grid system etc., all complete as directed by Engineer - In - charge.[Note:- Retrieved false ceiling tiles, runners, cross tees will be supplied from department at free of cost.] |
| 156 | Repairing the existing Galvalume steel profile sheets for roofing and cladding including removing the damaged sheets/bolt, nut, washer etc., refixing the existing sheets after straightening the existing, sheets cutting the damaged sheet with new bolt, nuts & washers etc., all complete as directed by Engineer - In - charge.[Note:- Retrieved Galvalume sheets will be supplied from department at free of cost.] |
| 157 | Providing and fixing cold rolled colour coated Galvalume steel profile sheets for roofing and cladding using sheet of 0.47mm base thickness 550Mpa yield stress (ASTM A792m) with coating class AZM 150 (minimum 150 gram/Sq.m total mass zinc aluminium coating of both sides as per relevant standards) of make JSW / Bhushan / TATA to suit a purlins spacing of 1.5 mts c/c including the cost of providing ridge gutter edge profiles, cost of making crimps for curved surface, fixing over purlins, making etc., all complete as per drawings and specifications.Note: 1) The sample of Galvalume steel sheet shall be got approved by the Engineer-in- charge before making bulk order.2) The sheet shall be fixed using self drilling/self tapping screws of size (5.5 mm X 55mm) with EPDM seal or with polymer coated J or L hooks, Bolts and nuts 8mm dia with Bitumen and G.I limpet washers or with G.I limpet washer filled with white lead complete up to any pitch in Horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 158 | Repairing the rolling/Lift mechanism chairs by repairing the damaged portions by servicing, strengthening the joints using screws/adhesive of Fevicol including cost of screws, adhesives etc., all as directed by the Engineer-in-Charge. (Note:- Required retrieved chairs will be supplied by department at free of cost) |
| 159 | Repairing the existing wire netted chairs by replacing the damaged or loose wire base including identifying the damaged/loose netted portion, cutting/ removing the damaged portion or completely removing the wire net, netting the area with new wires, trim any excess wire and ensure all connections fixed/tied properly, tuck in any sharp ends to avoid injury and check the stability of the chair, making adjustments as necessary etc., all complete as directed by the Engineer-in-Charge. |
| 160 | Repairing the existing revolving chairs by replacing the damaged wheels with new wheels including removing the broken/ damaged wheels, fixing with new nylon chair wheels (black) to suit the existing type of wheels, etc., all complete as directed by the Engineer-in-Charge.(Note:- Tenderer shall note that one set of wheel involves replacing of 5 Nos. of wheels per chair). |
| 161 | Servicing the existing lifting mechanism chairs including checking the chair revolving system, removing the damaged lifting mechanism system, replacing the lifting mechanism of approved make with required hydraulic oil, checking lifting system, servicing the chair, etc., all complete as directed by the Engineer-In-Charge. |
| 162 | Servicing the vanetion blinds/vertical blinds including removing the complete set of blinds, removing the damaged clip suspended from stilt traveler, fixing the vanes with new clip, checking the bead chains and its movement, servicing for smooth operation of blinds etc., all complete as directed by the Engineer-in-Charge. (Note:- Rate shall be quoted for complete set of vanetion blind/ vertical blinds for one window) |
| 163 | Numbering the houses by writing letters/ numbers/ symbols with enamel (Marker) paint of approved colour on the face of the wall/ Display Boards using templates and stencil cutting, including base painting, cost of materials, labours, scaffolding, applying wall care putty wherever required to making surface smooth, etc., all complete as per specification and as directed by the EIC. |
| 164 | 150mm size letters/Numbers of approved font over base area upto 0.55 sq.m for house letters - maximum Twelve digit letters in each. |
| 165 | 150mm size letters/Numbers of approved font over base area upto 0.25 sq.m for house letters - maximum Six digit letters in each. |
| 166 | 100mm size letters/Numbers of approved font over base area upto 0.16 sq.m for house letters - maximum six digit letters in each. |
| 167 | 50mm size letters/Numbers of approved font over base area upto 0.16 sq.m for house letters - maximum Twelve digit letters in each. |
| 168 | Labour charges for emergency complaints, clearing the blockages in road during monsoon period, segregating and stacking and shifting of materials at scrap yard including segregating the used and unused items separately, stacking pipes, wood, sanitary ware, etc. separately, loading the scrap in vehicle for disposal, cleaning the yard premises, etc., all complete as directed by Engineer - In- charge.Note:- 1) The tenderer shall note that one operation involves one or all activities of description mentioned above for a net duration of 8 (Eight) hours.2) Rate shall be quoted for each operation for a net working time of 8 (eight) hours in a day.3) The contractor shall engage one unskilled manpower for each operation. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Less (-) 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Government of IndiaDepartment of Atomic EnergyGeneral Services OrganizationCivil Engineering Group TENDER DOCUMENT FOR Carpentry maintenance and other miscellaneous works at residential & non-residential buildings in Anupuram Township during the year 2026-2027. Tender No: GSO/CTC/CEG/311/2026 Part – II : Financial Bid (Section - VIII) INDEX S/No. Title Page No. |
| 169 | GENERAL INFORMATION FOR GUIDANCE OF TENDERERS |
| 170 | The schedule of quantities is to be read for the purpose of pricing in conjunction with the special conditions, general rules for the guidance of contractors, conditions of contract, specifications, drawings, schedule of supply of materials and the appendices. |
| 171 | The prices inserted in the schedule of quantities shall be inclusive of value of the work described including all cost and expenses, which may be required in and for the construction of the work described together with the general risks, liabilities and obligations not forth or implied in the documents on which the tender is to be based. |
| 172 | The quantities stated are to be considered approximate only and the unit prices entered in the schedule of quantities and prices shall apply only to the actual quantities measured in the completed work in accordance with the specifications. |
| 173 | All the materials other than those shown in schedule of supply of materials in section VII are to be arranged by the contractor and his rates should account for the same. |
| 174 | Rates quoted for all items in this tender shall include cost of all materials including cement and steel. Department will not supply any materials other than materials stipulated in Section - VII of the tender and as such the rates quoted must be all inclusive. |
| 175 | If contractors need any clarification they are required to contact the ‘Head, CTC, CEG, GSO, Kalpakkam – 603 102, Chengalpattu district, Tamilnadu (Ph – 044 - 27481238 and 044-27480500 Extn. 84727, 85803) during office hours. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
