|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 7 | 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 15 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | 12 mm cement plaster finished with a floating coat of neat cement of mix: |
| 17 | 1:4(1 cement: 4 fine sand) |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 19 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 20 | Kitchen sink with drain board (510x1040 mm bowl depth 250 mm) |
| 21 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 22 | Semi rigid pipe (32 mm dia) |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 24 | 15 mm nominal bore |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall |
| 26 | 15 mm dia nominal bore |
| 27 | 20 mm dia nominal bore |
| 28 | 25 mm dia nominal bore |
| 29 | 40 mm dia nominal bore |
| 30 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 31 | 25 mm nominal bore |
| 32 | 20 mm nominal bore |
| 33 | 40 mm nominal bore |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 35 | 20 mm nominal dia Pipes |
| 36 | 25 mm nominal dia Pipes |
| 37 | Providing and fixing ball valve (CPVC) of approved quality: |
| 38 | 25m mm nominal bore |
| 39 | 20m mm nominal bore |
| 40 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 41 | 110 mm diameter |
| 42 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 43 | Single tee with door 110x110x110 mm |
| 44 | Bend 87.5° 110 mm bend |
| 45 | Providing and fixing brass bib cock of approved quality : |
| 46 | 15 mm nominal bore |
| 47 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 48 | 30 cm length 15 mm nominal bore |
| 49 | Providing and fixing brass stop cock of approved quality : |
| 50 | 15 mm nominal bore |
| 51 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 52 | G.I. pipes |
| 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 54 | 10 litre capacity - White |
| 55 | Providing and fixing of Rainwater Filter of make \\"Rainy Brand\\" or equivalent for rain water harvesting suitable for area upto 180Sqm ,filter type opend end ,non -clog with maximum dischatge 80 Liters per minute fixed with ncessary screw complete. Please Enable Macros to View BoQ information |
