|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the areacleared. |
| 2 | Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in Soft/Loose soil |
| 3 | Hard soil mixed with Kankar / boulders, Morrum |
| 4 | Add extra over item No. 1 to 8 for disposal of excavated material above initial lift of 1.5m and for every additional lift of 1.5m or part there of including loading and un- loading wherever required |
| 5 | Preparation and dressing the sub grade including removal of irregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and kankar & murrum forBed |
| 6 | Side Slope |
| 7 | Canal lining with hydraulic compressed pre-cast slab of cement concrete M15 tiles of size 300 x 150 x 40 mm laid over 12 mm (av.) thick subgrade cement plaster in CM (1:6) , 16 mm thick jointing sandwich plaster in CM 1:3 and 6 mm thick jointing mortar in cement mortar (1:3) etc. including curing and all leads& lift of all construction materials complete in all respectBed |
| 8 | Side Slope |
| 9 | Supplying, laying & spreading of LDPE film of 250 micron on bed and sides including jointing etc. complete as per specifications including cost of LDPE film, overlapping, adhesive tape etc. with transportation charges upto work site complete. |
| 10 | Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm |
| 11 | Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materials including curing etc. complete. In cement sand mortar 1:6 |
| 12 | Add extra if well burnt clay bricks (size 230x110x70 mm) class designation 100 as per specifications are to be used |
| 13 | Plaster in cement sand mortar 1:6 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials , of thickness:12mm |
| 14 | Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra) |
| 15 | Ms angle iron 'Y' shaped 1.34m per angle 50x50x6mm placed 2.5m apart@ 4.5kg/m |
| 16 | Providing and laying cement concrete including curing,compaction etc. complete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts, struts, buttresses, string orlacing courses, parapets, coping, bed blocks, anchor blocks,plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size. |
| 17 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 18 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 19 | Renewal of old putty of glass panes (length) |
| 20 | Renewing glass panes,with putty and nails wherever necessary |
| 21 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un- Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product.70.0 sq.mm @3.5core |
| 22 | 25.0 [email protected] |
| 23 | 10.0 sq.mm @4core |
| 24 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T- iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). |
| 25 | P & F Bib Cock (IS : 8931 Mark), Superior quality ofapproved make: |
| 26 | (-do-) Long body, 15mm nominal bore weight not less than690 gm |
| 27 | P & F Inlet Connection (Angle Valves) Superior quality, ofapproved make, for Wash basin, Gyser etc. |
| 28 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 29 | P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 580mm x 450 mm |
| 30 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in- charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : |
| 31 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housingto allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products. |
| 32 | LED Street Light fixture with Minimum lumen output 8700 lm |
| 33 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R- 410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , singlephase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. |
| 34 | 1.5 TR ISEER not less then 4.6 |
| 35 | 2.0 TR ISEER not less then 4.6 |
| 36 | Providing and fixing stainless steel railing made of Hollowtubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainless steelbolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight ofstainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(A)Grade 304 |
| 37 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 38 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on wallsand pillar). |
| 39 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.. As per Pwd bsr ch no s-1 code 1.59+ |
| 40 | Providing and fixing bath shower of approved quality/make.C.P. Brass of heavy & superior quality 150mm |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal size |
| 42 | Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of >98%. Connect up to multiple strings PV arrays, Easy & fastconnection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document.Solar panels more than 10 KW and up to 50 KW at a single location. |
| 43 | Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :ISI 9 mm teak ply one side BWR |
| 44 | Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood grade-I mouldings and beadings in droos and windows size :-50x20 mmTotal |
| 45 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height)For corners considered 1/5 th of item 2 |
| 46 | Providing and applying Malamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect.New Work Same as per item no 1 |
| 47 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture as per direction of Engineer-in-charge of size 595 X 595 mm in true horizontal level suspended oninter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm) consisting of main „T‟ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre to centre, and cross „T‟ of size 24X32mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main „T‟ at 600mm centre to centre to form a grid of 1200X600mm and secondary cross ‟T‟ of length 600mm and size 24X32mm made out of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting......on periphery walls/partitions on a perimeter wall angle precoated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium silicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc., wherever required, Main „T‟ runners to be suspended from ceiling using 50 mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvnised steel L cleat level adjusters of size 80x25x2mm, spaced at 1200mm centre to centre long main „T‟ bottom exposed with 24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)having area less than 0.30 Sqm. The calcium silicate ceiling tiles shall have NRC. |
| 48 | Desk top computer mid highlevel configuration (Intel i7 with 14th Generation (estimated cost Rs. 90,000 considering pre-installed GenuineWindows 11 Profesional, 16 GB RAM and 1 TB Storage) |
| 49 | Ups 1kva |
| 50 | Supply of “ Computer Table” of Modular nature having all the necessary arrangement for keyboard, CPU, UPS, Printer and wire manager Table Top : The table top of size 900 x 600mm(WxD) would be made out of post formed on 25 mm thick particle board with 0.7mm thick Carvica sheet in half round post formed finish on the front and rear side, matching color compensating laminate fixed on the bottom side. Other two sides are edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. Keyboard Below the table top the keyboard pull out tray having sliding arrangement fixed on side supporting legs with 450mm G.I. telescopic channel. Keyboard of size 750 x 450 made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all four sides Flat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. Side Support :Two supporting side leg of size 600 750mm(WxH) made out of post formed on 18 mm thick particle board with 0.7mm thick Carvica sheet in half round post formed finish on two sides and other two sides are edge banded and sealed with CPU, UPS & Printer Places Table having the provision for CPU of size 300 x 600 x 600mm(WxDxH) below the table top on the right side of table adjoining to this on left side below the table the provision for UPS of size 450 x 600 x 250mm (WxDxH) and above this the provision for the Printer and stationary having overall dimension of 450 x 600 x 300mm(WxDxH). All this is made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all four sides flat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. All the parts of the table are duly fixed with mini fix dowel system with each other having matching drilled holes to be made on CNC multi hole boring machine for proper matching and alignment of the different part of the table, 4nos. of Self Adjusting level screw of size 45 x 6mm are provide at the bottom of the both legs for the proper leveling of the table. |
| 51 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height)For corners considered 1/5 th of item 2 |
| 52 | Automatic weather station under hydro metrology lab. With Installation. |
| 53 | NVR 32 Channel 4K |
| 54 | poe Switch 8 port full giga(10/100/1000) |
| 55 | poe Switch 24 port full giga(10/100/1000) |
| 56 | Hard disk 10TB |
| 57 | Bullet camera 5MP 6mm |
| 58 | bullet / Dom camera 5 MP |
| 59 | CAT- 6 Outdoor cable(300 mtr.) |
| 60 | 4U POE Rack |
| 61 | 8U Network Rack with PDU, Self tray |
| 62 | RJ-45 Moduler plug |
| 63 | Optic fiber cable outdoor |
| 64 | SFP fiber convertor |
| 65 | SFP Moduler |
| 66 | Spike power |
| 67 | Bird spike |
| 68 | PVC Box for camera |
| 69 | Pole mount brackets |
| 70 | U Clip for wire fixing |
| 71 | UPS 600VA |
| 72 | HDMI Switch 4 port 4k |
| 73 | USB Extension cable |
| 74 | Wireless mouse |
| 75 | LED TV 65\\" FULL HD |
| 76 | Installation & SERVICE charge |
| 77 | Earth work in excavation in foundation, trenches or drain (not exceeding 1.50 m in width) including dressing of sides and ramming of bottom, lift up to 1.5 m including getting out the excavated soil and disposals of surplus excavated soil as directed with a lead in a 50 m, All kind of soil. |
| 78 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering including lead up to 50m and lift up to 1.5m |
| 79 | P & L in position cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size in foundation plinth, excluding the cost of shuttering using 1 Cement:4 sand:8 aggregate .(c)40mm |
| 80 | Brick Masonry in foundation and plinth with brick of CD 100 in cement sand mortar 1:5, Add extra over item no.6 (a)For using brick class designation 100 instend of class designation 75 |
| 81 | Brick masonry for super structure with brick of CD 100 in cement sand mortar 1:5, Add extra over item no.6 (a)For using brick class designation 100 instend of class designation 75,(b) Extra for brick work in superstructure above plinth level for every 5 m and part thereof |
| 82 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes Type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make110 mm dia |
| 83 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes fittings type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /makeBend 87.5 Dg.110mm dia |
| 84 | Cement Plaster with cement sand mortar 1:5 including racking of joints, smooth finishing and curing etc. complete including all leads of all materials of thickness 12 mm thick in 1 coats. |
| 85 | Cement concrete flooring grade 1:2:4 (1 cement, 2 course sand, 4graded stone aggregate) rounded off edge etc. but excluding the cost of nosing etc. complete, 40 mm thick with 20 mm nominal size aggregate. |
| 86 | Construction of soakage well in all type of soil with 300 mmthick dry masonry, top and bottom 300 mm course in CM 1:6,80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal,Kharanja, 40 mm thick M-15 grade C.C flooring , earthworkcomplete as per approved drawing including disposal of earthwithin a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth |
| 87 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25mmx25mmx2.10mm |
| 88 | Providing and fixing T-iron frames for doors window and ventilators of mild steel tee-sections, joints mitered and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement :3 course sand : 6 graded stone aggregate 20mm nominal size) or with wooden plug and screw or rawl plugs and screws of with fixing clips or with bolts and nuts as require including fixing of necessary but hinges and screw and applying a priming coat of approved steel primer. |
| 89 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint(a) Single leaf shutters |
| 90 | (b)Add extra for double leaf shutters. |
| 91 | White washing with lime to give an even shade including all scaffolding.new work three or more coats. |
| 92 | Painting with enamel paint of approved brand and manufacture to give an even shade. : two or more coats on new work. |
| 93 | P & F Indian type white glazed vitreous china Ist quality WC Orissa pan (IS : 2556 Mark) with 100 mm vitreous China p or S trap including cutting and making good the wall and floor/ Size 580 x 440 mm |
| 94 | P & F G I pipes (External works) with G I fitting ( IS: 1239 Mark) including trenching & refilling earth etc. 15 mm dia nominal bore Class - B |
| 95 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union(IS : 1239 Mark) including trenching & refilling earth etc.:25 mm dia nominal bore class-b |
| 96 | P & F Bib cock ( IS:8931 Mark), Superior quality of approved make. ( Brass 400 gm, 15 mm nominal bore) |
| 97 | P & F Storage tank ( IS : 12701 marked indicated the BIS license No), approved make with cover, 25 mm dia IM long G I over flow pipe & 25 Cm long wash out pipe with plug & socket, including making connection etc. complete of approved design. ( 500 ltrs) |
| 98 | P & F Flush Cock/flush valve ( IS:9758 Mark) for W/C of approved quality make.CP brass half turn Exposed 25 mm nominal bore. |
| 99 | Providing and Laying and jointing Glazed S W Pipe grade A ( IS 651 marked) of approved make with spun yarn and stiff mixer of cement mortar 1:1 excavation and refilling of earth in all type of soil upto 1.20 mtr depth S W fitting including testing of joints etc complete. 100 mm dia |
| 100 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe) 100mm dia S.W. Pipe. |
| 101 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot 1.45Kg. per square meter of area for each course, second course of roofing felt type 3 grade –I (Hessian based self finished bitumen felt )and fourth and final course of stone grit 6mm and down size of pea sized gravel spread at 6cubes diameter per square meter including preparation of surface, but excluding grading, complete with Bitumen felt (Hessian base) type 3 grade - I conforming to : 1322. Please Enable Macros to View BoQ information |
