|
| 1 | Dismantiling brick or stone masonry in lime or cement mortar under 3.00 mtr height including stacking the useful materials for reuse and removing the debris within 50 metres lead. |
| 2 | Earth work excavaton in foundation in hard soil or gravelly soil within 50 m initial lead and 1.50 mt initial lift including rough dressing and bracking clods to maximum 5 cm to 7 cm and laying in layers to exceeding 0.3 mt in depth and as per direction of the department. |
| 3 | Providing, spreading, filling in foundation and plinth with sand watered and rammed as per OPWD.specification including all cost of materials, labour, conveyance, royalty,Tools and Plants etc.all complete, required for the work to finished items of work |
| 4 | Cement concrete (1:4:8) with 40 mm size hand broken hard granite metal including all cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete,as per OPWD specification required for the work to finished items of work. |
| 5 | Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) in foundation and plinth including all cost of materials, labour, conveyance, royalty, Tools and Plants, water for curing etc. all complete,as per OPWD specification required for the work to finished items of work. |
| 6 | Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) in Super structure including all cost of materials, labour, conveyance, royalty, Tools and Plants, water for curing etc. all complete,as per OPWD specification required for the work to finished items of work. |
| 7 | Cement concrete work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying all cost of materials, labour, conveyance, royalty, T & P, water for curing etc.all complete as per OPWD specification required for the work to finished items of work |
| 8 | Requirement of HYSD / MS rod & labour for cutting, bending, binding, straighting and laying the grills and placing in position including cost of rod & binding weir 18 to 20 gauge |
| 9 | Rigid and smooth centering and shuttering for rCC works including false work and dismentalling then after casting including cost of materials complete in ground floor, RCC foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc |
| 10 | RCC Lintel |
| 11 | RCC beams, column, grider and bressmer, etc |
| 12 | RCC floor and roof slabs, landings,balconies, projecting sun shades and chajjas |
| 13 | Supplying, fitting and fixing vitrifed tile In floors of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand ) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. |
| 14 | 12 mm thick cement plaster (1:4) over brick work with cement punning for skirting |
| 15 | 12 mm thick cement plaster in cement morter(1:6) including all cost conveyance, rayalty etc all complete |
| 16 | 6 mm thick cement plaster in cement morter(1:4) including all cost, conveyance, rayalty etc all complete |
| 17 | 16 mm thick CP (1:6 ) over brick or stone masonary work including all cost, conveyance royalty etc. all complete. |
| 18 | Finishing surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 19 | Painting two coats with approved paint and primer including cost of labour and materials ect. all complete. |
| 20 | Labour for fitting and fixing of MS window grills as per approved design including cost of all materials complete and directon of Engineer in charge. |
| 21 | Requirement of MS Door, window & Grill and its cost etc Please Enable Macros to View BoQ information |
