|
| 1 | Part-A (Material Provided by Contractor) |
| 2 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through |
| 3 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor |
| 4 | 33KV “V” Type Cross Arm |
| 5 | 33KV Side Arm |
| 6 | Clamp for 33 KV \\"V\\" type Cross arm & side arm with bolts and nuts |
| 7 | Providing 6” dia.MS G.I. pipe 3m long |
| 8 | F-bracket for 33 KV |
| 9 | Danger Plate with clamp and Nut & Bolt |
| 10 | G I Barbed Wire |
| 11 | Nut Bolt and washer all sizes |
| 12 | ‘E’ Bracket for 33 KV |
| 13 | Top Channel 125x65 mm, 3200 mm long with clamp |
| 14 | PG Clamp Dog to Dog |
| 15 | Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp |
| 16 | Holding Clamp for GI Pipe & cable |
| 17 | Lug for ACSR Dog Conductor |
| 18 | Stay Clamp |
| 19 | Stay Rod 20x1800mm |
| 20 | Stay Wire 7/8 SWG |
| 21 | MS Guarding Angle With Clamp |
| 22 | GI Wire 6 SWG |
| 23 | GI Wire 8 SWG |
| 24 | Earthing Rod 20x2500 |
| 25 | 33KV Polymer pin insulator |
| 26 | Disc Fitting 33KV |
| 27 | Disc Insulator 33KV |
| 28 | Al. Paint |
| 29 | Red Oxide Paint |
| 30 | PART - B- WORKShifting,loading and carriage of following materials on private truck at store centre Deoria & Un-loading of the same with proper stacking at work site |
| 31 | P.C.C. Pole 9M long |
| 32 | P.C.C. Pole 11M long |
| 33 | S.T. Pole – 11 Mtr. Long |
| 34 | 33 KV ‘XLPE’ Cable 3x300mm² |
| 35 | ACSR ‘Dog’ Conductor |
| 36 | Digging & laying of 33 KV Cable with sand & brick and back filling/HDD Method by drilling machine as per site requirement. |
| 37 | Laying of 33KV ‘XLPE’ cable in air and Loop |
| 38 | Cable jointing charges of 33 KV XLPE Cable Outdoor & St.TH |
| 39 | GI Pipe Earthing Complete for Cable jointing Kit with materials |
| 40 | Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm/ Side Arm , M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO). |
| 41 | Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) . |
| 42 | Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) . |
| 43 | Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 44 | Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm/ Side Arm , M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO). |
| 45 | Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) . |
| 46 | Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) . |
| 47 | Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm/Side Arm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO. |
| 48 | Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) . |
| 49 | Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) . |
| 50 | Erection of Double pole structure on 9 mtr PCC Pole for Cable Rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 51 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 No conductor in parallel. |
| 52 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. |
| 53 | Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. |
| 54 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire No 6 SWG and G.I. wire No 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing. Please Enable Macros to View BoQ information |
