|
| 1 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Rate per cum for grading - I Material |
| 2 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in- Charge. |
| 3 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 4 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.3 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 5 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregate of specified grading , premixed with bituminous binder @ 4.5 % by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required graded, level and alignment , rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MORTH specificetion clause no. 505 complete in all respects. Sandwich System |
| 6 | Providing and laying dbituminous concrete with higher capacity batch type HMP using crushed aggregate of specified grading , premixed with bituminous binder @ 5.2 % by weight of total mix and filler, transported the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grad, level and alignment , rolling with smooth wheeled , vibratory and tandem rollers to achieve the desired compaction as per MORTH specificetion clause no. 505 completeb in all respects with VG30 Bulk bitumin . |
| 7 | Providing and laying World Athletics approved, European/American/Australian/Indian origin athletic track Sandwich system of minimum 13 mm thickness, the entire system shall be free of TDI, chlorinated hydrocarbon and any other heavy metals. Price includes transportation of materials till site and World Athletics Class 2 testing and certification.The synthetic Track should conform to the following specifications: Tensile strength 0.5N/mm2 0.3N/mm2 Elongation at break >40˚% Force reduction 35−50% Vertical deformation 0.6−2.5mm Standard deformation 0.6−1.8mm (at0−40˚C) Thickness >14mm Relative abrasion >1.0 Friction(sliding coefficient) >0.5 <1.1 Spike resistance Class1 Remaining indentation <1.0mm Environmental requirements Limit values for DOC, EOX, Heavy metals, smell. The proposed product should following below T&C 1. The proposed product should be WA \\"World Athletics\\" certified for a minimum thickness of 15 mm full PU system. 2. The manufacturer and the product offered should be in a list of current WA certified product list. 3. The warrenty of product should be atleast 7 years. 4. The DLP period for the product are 5 Years. 5. The Life span of product should be more than 12 Years. 6. Product to be only of European, American, Australian or Indian Origin. 7. The class -II certification of proposed track are included. |
| 8 | Construction of Steeplecase pit inside North D portion as per IAAF drawing and as directed by Engineer-in-Charge. Supplying and fixing of sports equipment material for conducting various event as per IAAF approved.Polevault boxes with coverTake off board for long jump and triple jump plus wooden boardShort put ringsHammer cum Discuss ringDiscuss Ring made of the white powder-coated aluminium frameWater jump hurdle for steeple chaseHammer cage with socketDiscus cage with socket |
| 9 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 10 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 11 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 12 | Providing coarse clean sand in filling in foundation trenches or in plinth including rammimg and watering in layers not exceeding 150 mm thick with all leads and taxes all complete as per building specificetion and direction of E/I. |
| 13 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 14 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:3) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering - All works upto plinth level. 1:2:4 (1 cement: 1.5 coarse sand(zone III):3 graded stone concrete 20mm nominal size) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 19 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 20 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 23 | Foundations, footings, bases of columns, etc. for mass concrete |
| 24 | Suspended floors, roofs, landings, balconies and access platform |
| 25 | Shelves (Cast in situ) |
| 26 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 27 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 28 | Weather shade, Chajjas, corbels etc., including edges |
| 29 | Suppling , fitting and fixing good quality , well dressed and well seasoned sal wood work in chaukhat in door and window skylights, fanlight and C/W celetial windows opening , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting wall and lintels all complete as per building specification and direction of E/I . |
| 30 | Supplying,fitting and fixing 35mm thick solid core type decorative single leaf flush shutters with both sides decoative veneered with black board core blended with high quality phenol formal dehyde synthetic resin of standard make with aluminium fittings such as hinges , tower bolts , handle , cleats and sand blocks and taxes all complete as per building speciication and direction of E/I . |
| 31 | Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 32 | Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 33 | providing Tor steel reinforcement of 8mm dia rods to 16 mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 8 MM |
| 34 | 10 MM |
| 35 | 12 MM TO 16 MM |
| 36 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 37 | Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. |
| 38 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 39 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 40 | Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 41 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 42 | Extra for providing and fixing 30X4mm glass strips in joints of flooring , complete job as per specification and direction of E/I. |
| 43 | Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 44 | Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 45 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 46 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 47 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | Providing 12 mm cement plaster (1:4) with clean coarse and of F.M. 1.5 including creening,curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 49 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 50 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 51 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 52 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding |
| 53 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 54 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 55 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 56 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 57 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 58 | Designing ( aesthetically) and construction rcc ground reservoir/ rcc sumps in M30 mix of required capacity cost of 50000 litres capacity |
| 59 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. : All kinds of soil. Track Semicircular Portion |
| 60 | Treatment of soil under existing floors using chemical emulsion @ one litre per jole,300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 ( 1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 61 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDMrubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. |
| 62 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 63 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : 100x75x3.50 mm |
| 64 | 50x40x2.50 mm |
| 65 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) |
| 66 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 67 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 68 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished welded type tubes 20KG/SQM |
| 69 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, includinguse of chequered plate wherever required, all complete |
| 70 | Steel work welded in built up sections/framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings,frames,guard bar , ladder, railings , brackets , gates and similar work. |
| 71 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matchingpigments etc., complete |
| 72 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. |
| 73 | Providing and fixing precoated galvanised steel sheet roofingaccessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester topcoat 15-18 microns using self drilling/ self tapping screws complete : |
| 74 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 75 | Finishing walls with textured exterior paint of required shade : : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied :@ 2.20kg/10 sqm |
| 76 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. Track Semicircular Portion |
| 77 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 78 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 79 | Cost of drilling 200mm X 165mm X 125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set withhydraulic DTH rig machine , all complete including supplying all materials , tools , drilling rig , air compresser and equipments, as well as fuel , lubricants and cost of transportation of rig machine and other vehical up to the site up to the site ( basic rates ) . (ADD 14.95% ON BASIC RATE FOR C.P.+O.H)(a) From 0.00 M to 50.00 M below G.L |
| 80 | (b) From 51.00 M to 125.00 M |
| 81 | (C) From 126.00 M to 150.00 M |
| 82 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200mm Nominal size dia. |
| 83 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 84 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm Dia. |
| 85 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nutsof required size complete. |
| 86 | Supplying 100mm dia. Submersible pump sets confirming to IS 8034 and motor cvonfirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft ant polypropylene/ norylimpeller. Motor suitable for working on 415 V+10%, 3PH, 50 HZ, AC supply with cable guard, thurst carbon/ fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump ste shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined no return valve shall be provided with pump. 3 m submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible pump set 150mm dia (with polypropylene/ Noryl Impeller) 2 HP |
| 87 | D.O.L starter with SS Enclosure with 380/415 volt coil 5 to 10 H.P. |
| 88 | Supplying ,fitting & fixing & connecting 3 core 4 sqmm flat copper submerssible cable of Finolex / Hevels make including all taxes ,royalty etc all complete job as per direction of E/I (ADD 14.95% ON BASIC RATE FOR C.P.+O.H) |
| 89 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. 50 MM NOMINAL DIA PIPES |
| 90 | Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. |
| 91 | Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I. 150mm dia |
| 92 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia |
| 93 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in in the th required thickness, for allleads & lifts, all complete charge aspe rection of Engineer-in-charge |
| 94 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge. |
| 95 | DT: Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, Supply labours, tools, drilling, rigs, air compressor and equipments as no.-93- well as fuel lubricant, for making 125/115 mm dia boring etc. M1037 (i)+ and cost of transporting rig machine and other vehicle up to site 15% C.P. of work as per specification and direction of E/I.. (Basic Rates) Drilling upto 30 mtr. Depth below G.L. in Rural Area |
| 96 | Providing and fixing brass /C.I. Stop cock of approved quality all complete as per specification and direction of E/I. BRASS STOP COCK |
| 97 | Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/I (b) 20 mm dia |
| 98 | (c) 25 mm dia |
| 99 | Making holes in walls for laying G.I. Pipe and restoring the same after pipe laying as per specification and direction of E/I. (a) 125 mm thick wall |
| 100 | (b) 250 mm thick wall |
| 101 | Supplying , fitting and fixing the following items complete with all material as per specification and direction of E/I. (b)(i) mirror (300 X 450 MM) |
| 102 | (c) (i) C.P. brass tower rail |
| 103 | (c) (ii) C.P. brass soap container medium quality with screw and hinges etc. |
| 104 | Supplying fitting and fixing vitreous white glazed ware I.W.C of parry hindustan or any other I.S.S …....approved all complete as per specification and direction of E/I. 580 mm long , ( c ) With 10 lit . Low level PVC CISTERN |
| 105 | Supplying fitting and fixing vitreous white glazed ware E.W.C with p trap of parry hindustan or any other I.S.S…... approved all complete as per specification and direction of E/I. WITH P TRAP , ( b ) With 10 lit . Low level PVC CISTERN |
| 106 | Supplying fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware urinal all complete job. (a) Flat back or standing corner (600 mm x 350 mm) |
| 107 | Supplying fitting and fixing 40 mm high vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved all complete as per specification and direction of E/I |
| 108 | Supplying material and labour and construction inspection chamber all complete as per specification and direction of E/I |
| 109 | Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of lcontractor's profit and overhead charges - |Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc|or equivalent mark). Pillar cock |
| 110 | bib cock |
| 111 | Angular Stopcock /2 way bib cock |
| 112 | Telephonic shower flexible pipe |
| 113 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter |
| 114 | 110 mm diameter |
| 115 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee without door 75x75x75 mm |
| 116 | Single tee without door 110x110x110 mm |
| 117 | Bend 87.5° 75 mm bend |
| 118 | Bend 87.5° 110 mm bend |
| 119 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes |
| 120 | 32 mm nominal dia Pipes |
| 121 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.15 mm nominal dia Pipes |
| 122 | 20 mm nominal dia Pipes |
| 123 | Providing and placing on terrace (at all floor levels) polyethyl ene waterstorage tank, ISI : 12701 marked, with cover and suita ble |lockingarrangement and making necessary holes for inlet, outlet andoverflowpipes but without fittings and the base support for tank. |
| 124 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 125 | Wiring for light/ceiling fan/exhaust fan/call bell point with 2x1.5 sq.mm PVC insulated stranded copper conductor cable alongwith 1 No. 1.5 sq.mm PVC insulated copper conductor cable for earthing in PVC Medium conduit as required. (Point shall be controlled / looped Fromexisting point). Point wiring in PVC conduit, with modular type switch; Group C |
| 126 | Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC Medium Class conduit along with 1 No. 4 sq.mm FR PVC insulated copperconductor single core cable for loop earthing as required. |
| 127 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sqmm earth wire (for single separate 5A from nearest switch board and fans) |
| 128 | Wiring with 2 x 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVCconduit alongwith 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 129 | 4x6 Sqmm + 2x6 sqmm earth wire (to be used for all LDB & UPS DB.) |
| 130 | S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 AMPS, one way switch |
| 131 | 3 pin 5/6 Amps, socket outlet |
| 132 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supplying and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. |
| 133 | S/F Batten Holder Supplying and Fixing Batten /Angle Holder Including Connections etcas required. |
| 134 | SITC of following rating surface mounted LED tube light fitting suitable for 230V 50Hz single phase supply etc complete as required. 20/22 W LED Tubelight |
| 135 | iTC exhaust fan upto 450 mm sweep:-Installation of exhaust fan upto 450mm sweep in the existing opening, lincluding making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required. |
| 136 | Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. asrequired (Without MCB/RCCB/ISOLATOR). 8 ways, Single Door |
| 137 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, \\"B\\" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required, 6/32, single pole, \\"B\\" series |
| 138 | S/F DP MCB Isolator -Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connectíions, testing and commissioning etc. as required 40 amp |
| 139 | Supplying and fixing of 9/10 Watt LED Bulb |
| 140 | Supply of 12\\" (300mm) metal exhaust fan |
| 141 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 35 sqmm direct in ground including excavation, sandcushioning, protective covering andrefilling the trench etc as required |
| 142 | PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable with aluminium conductor for working voltage up to and including 1100 volts. (conforms to IS:1554, part-1)25 sqmm, 3.5 core |
| 143 | S/F Vertical Type T.P. M.C.B D.B. :-Supplying and fixing of following ways surface/recess mounting, vertical type 415 volts TPN MCB distribution board of stel sheet, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 Way (8+24), double door Vertical type |
| 144 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required. 6/32 amps single pole |
| 145 | 6/32 amps SPN |
| 146 | 40 amps DP |
| 147 | 50/63 amps TPN |
| 148 | S/F S.P. M.C.B. D.B.Supplying and fixing following way, single pole and neutral, steel sheet,MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 8 way, double door |
| 149 | Copper Earth Plate Elecrode:- Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but with charcoal or cock and salt) complete etc. as required. Lightning Conductors=4 nos +DBs+UPS). |
| 150 | S/L 8 SWG copper wire in ground :- Supplying and laying 8 SWG copper wire at 0.50 metere below groundlevel for conductor earth electrode, including soldering etc. as required. |
| 151 | Outdoor feeder panel supplying, designing, manufacturing, installation, testing and commissioning in correct aligment position, effecting proper connection of all incomer and outgoing of outdoor type cubical feeder pillar of suitable size not less then 30cm and up-to 45cm deep made out of M.S sheet 2mm thick(14 SWG) duly compartmentalized , double door with locking arrangement (IP54) duly fixed of MS angle iron frame work of suitable size, earthing with two nos earthing studi powder coated with rain shed structure etc as reqd . All interconnection should be made with 2.5, 4 Sq mm PVC Cu, wire |
| 152 | STONE METAL |
| 153 | STONE CHIPS |
| 154 | STONE DUST |
| 155 | CEMENT |
| 156 | BRICKS |
| 157 | Add GST 18 % |
| 158 | Add Labour cess 1% Please Enable Macros to View BoQ information |
