|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate SingleWindow INR Only INR Select, Excess (+), Less (-) CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Select Not Applicable Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited Name of work: Plinth protection, pathways, other civil works, and assistance to day-to-day operation and maintenance of main Water Treatment Plant; assistance to day-to-day operation and maintenance of water distribution network, cleaning of water tanks, and allied works at various places under CWS TadaliNIT no.: CWTD-CIV-E-22-2025-26, S. No. 2 . Category of services (To be selected by department) Category of bidder(To be selected by bidder) To be entered by department ITC Not Available Works Contract Bidder's Status (Mandatory) Rate of GST (in %) Total GST (in ₹) GST to be paid by bidder (in ₹) GST to be paid by WCL (in ₹) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description(Item no. 2 to 9.10 are Non-SOR items) Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Basic rate in figures to be entered by the bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount excluding GST inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | SCHEDULE-B (Items from/ based on Standard Schedule of Rates):Item no. 1.01 to 1.47.50 |
| 3 | Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department. |
| 4 | ISI marked screwed (threaded) heavy duty G.I. fittings including sockets, reducer sockets, elbows, bends, reducer elbows, tees, and unions for G.I. pipes of 15 mm to 80 mm diameter |
| 5 | Screwed (threaded) heavy duty G.I. fittings including nipples, clamps, flanges, and dummies for G.I. pipes of 15 mm to 80 mm diameter |
| 6 | Heavy duty plain CPVC fittings having thermal stability for hot & cold water supply, including sockets, reducer sockets, elbows, bends, reducer elbows, tees, and clamps for CPVC pipes of 15 mm to 25 mm diameter |
| 7 | Brass threaded heavy duty CPVC fittings having thermal stability for hot & cold water supply, including male thread adapters and female thread adapters for CPVC pipes of 15 mm to 25 mm diameter |
| 8 | Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 100 mm dia |
| 9 | Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 150 mm dia. |
| 10 | Cast iron (C.I.) heavy duty mechanical joints, including nuts & bolts, for C.I. pipes of 200 mm dia |
| 11 | Brass spindles (including check-nut) for valves, of specified diameter & length, without threading |
| 12 | Stainless steel spindles (including check-nut) for valves, of specified diameter & length, without threading |
| 13 | Heavy duty brass sprinklers with 360 degree adjustable rotation, range approx 6 mtrs (radius) |
| 14 | Mirror finish C.P. brass two-way bib cock: 15 mm nominal bore |
| 15 | Mirror finish C.P. brass fancy pillar cock with long nose/ long body of approved pattern: 15 mm nominal bore |
| 16 | HDPE tank lids (with locking arrangement) for HDPE water storage tanks of all sizes |
| 17 | ISI marked 5 HP, three-phase submersible pump-motor set of approved make & type, with head range up to 50 mtr, including ISI marked starter/ switch etc. all complete. The coil in the motor to be of copper. |
| 18 | ISI marked 10 HP, three-phase submersible pump-motor set of approved make & type, with head range up to 100 mtr, including ISI marked starter/ switch etc. all complete. The coil in the motor to be of copper. |
| 19 | L-225 star rubber spider coupling for water pumps |
| 20 | Single ball bearing no. 6309 for water pumps |
| 21 | Double ball bearing no. 3309 for water pumps |
| 22 | C.I. foot valve, including nuts & bolts, for 100 mm suction for water pumps |
| 23 | C.I. gland of same shape & size as per the existing 50 HP water pumps |
| 24 | Gland packing rope of 14 mm or 12 mm size |
| 25 | Rubber washer (ghibli) for foot valves, matching the existing shape & thickness, for 100 mm suction for water pumps |
| 26 | Rubber sheet of specified thickness (2 mm, 3 mm, etc.), for pipe joints etc. |
| 27 | Rubber washers for 15 mm taps |
| 28 | Rubber seal for flushing cisterns of 32 mm flushing pipe |
| 29 | Multipurpose sealant in semi-solid putty form (such as M-seal or equivalent) for sealing, joining, & fixing, in packs of 75-150 grams each |
| 30 | Pipe thread sealant in liquid form, in tubes/ packs of size 75-150 ml each |
| 31 | CPVC solvent adhesive (liquid) for joints in CPVC pipelines, in packs of size 100-250 ml each |
| 32 | 12 mm wide teflon tape for sealing joints, in packs of size 10-15 mtrs each |
| 33 | Mild steel screws of various sizes |
| 34 | Stainless steel screws of various sizes |
| 35 | Brass screws of various sizes |
| 36 | C.P. brass screws of various sizes |
| 37 | Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, and stacking of serviceable & unserviceable materials at separate designated places within a lead of 100 metres, as per instructions of WCL. Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, pipelines, cables, etc., the work is to be done through manual means. Each worker must be equipped with the required safety gear/ accessories (gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.). The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (gardening scissors, axe, hasiya, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete. |
| 38 | Threading of spindles (of brass or stainless steel) by mechanical means, as & when required, including cost of transportation. |
| 39 | Painting insides of water tanks with suitable non-corrosive, lead-free, water-proof rubber paint of approved brand and manufacture to give an even shade : One or more coats. |
| 40 | Letter-writing alongwith painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Colours/ shades to be as directed by the department. |
| 41 | Assistance in day-to-day operation & maintenance of Water Treatment Plant and water distribution network at CWS Colony and also at other establishments such as Central Workshop premises, G.M. Office, Central Store, etc. The job includes:(A) Day-to-day assistance in repairing of pumps, valves, pipelines, water supply fittings, etc.;(B) Daily assistance in dozing of alum & bleaching powder;(C) Day-to-day assistance in shifting of various materials regarding water supply system at Water Treatment Plant and also at other places under CWS jurisdiction, as per requirement;(D) Day-to-day assistance in operation of various valves, as & when required;(E) Day-to-day assistance in operation of various pumps, as & when required;(F) Minor excavation works for repairing pipelines etc., as & when required; and(G) Other allied/ related works.Note:(i) All these jobs are to be carried out by the contractor as per instructions of the department;(ii) The contractor has to deploy trained, experienced, and suitable workers for the job. Shift timings & shift-wise deployment shall be as directed by the department and it may change from time-to-time. Providing leaves to the workers is the responsibility of the contractor and the contractor is also required to deploy suitable substitutes for the work.(iii) Daily attendance shall be maintained at the designated place. Each worker is required to carry an ID card of some government authority (aadhaar card, voter's card, driver's licence, PAN card, etc.).(iv) Each worker must be equipped with adequate safety accessories such as washable & reusable face masks (if & when required), gum-boots/ safety shoes, raincoats (depenfing upon season & weather), torchlights (depending upon shift timings), and washable & reusable hand gloves. They shall also be equipped with basic tools & equipment required for the jobs described above, such as phawada, tagadi/ghamela, gaiti, kulhadi, kudali, tools for operating valves, etc. All these accessories & tools are to be provided by the contractor in the rate of this item.(v) Water & electricity required for the work shall be made available by WCL, without any cost to be charged from the contractor. |
| 42 | Carrying out the above works (as described at S. No. 7) by deploying 2 trained, experienced, and suitable assistant fitters (semi-skilled) per day. Their weekly rest-days can be staggered by the department. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2. |
| 43 | Carrying out the above works (as described at S. No. 7) by deploying 2 trained, experienced, and suitable workers (unskilled) per day. Their weekly rest-days can be staggered by the department. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2. |
| 44 | Assistance for day-to-day sweeping, brooming, cleanliness, & housekeeping at Water Treatment Plant, except toilet & gardens. The job includes:(A) Daily sweeping & mopping of floors, cleaning of dado with wet cloth, removing spider webs from walls and ceilings, cleaning of doors, windows, & gates with wet cloth, cleaning & dusting of wire mesh, etc.;(B) Daily dusting/ cleaning (with dry or wet cloth as per requirement) of tables, chairs, and other similar furniture items;(C) Daily sweeping & brooming at the locations open to sky;(D) Cleaning of roofs & chhajjas by sweeping & brooming, as & when required;(E) Removing grass, weeds, & minor shrubs, if any, from walls, chhajjas, roofs, etc., as & when required;(F) Daily collection of garbage at designated points and putting it on garbage vehicle of the Colony;(G) Housekeeping jobs such as shifting of various objects etc., as & when required; and(H) Other allied jobs related to sweeping, brooming, cleanliness, & housekeeping.Note:(i) All these jobs are to be carried out by the contractor as per instructions of the department;(ii) The contractor has to deploy 2 trained, experienced, and suitable workers for the job in general shift. However, shift timings can be occasionally changed by the department as per requirement. The weekly rest-days of the workers can be staggered by the department. Providing leaves to the workers is the responsibility of the contractor and the contractor is also required to deploy suitable substitutes for the work. In measurement, number of days shall be calculated as total number of manshifts (as per actual attendance) divided by 2.(iii) Daily attendance shall be maintained at the designated place. Each worker is required to carry an ID card of some government authority (aadhaar card, voter's card, driver's licence, PAN card, etc.).(iv) Each worker must be equipped with adequate safety accessories such as washable & reusable face masks (if & when required), gum-boots/ safety shoes, raincoats (depenfing upon season & weather), torchlights (depending upon shift timings), and washable & reusable hand gloves. They shall also be equipped with basic tools & equipment required for the jobs described above, such as phawada, tagadi/ghamela, etc. All these accessories & tools are to be provided by the contractor in the rate of this item.(v) Other tools & consumables (such as brooms, detergent, etc.) required for cleaning job shall be supplied by the contractor (details, quantities, & costs covered separately in item no. 9). Water & electricity shall be made available by WCL without any cost to be charged from the contractor. |
| 45 | Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department. |
| 46 | Washing powder of superior quality and approved brand |
| 47 | Scented phenyl (floor cleaner) of superior quality and approved brand |
| 48 | Glass cleaner liquid of superior quality and approved brand |
| 49 | Hard broom of minimum 4 feet length, of superior quality |
| 50 | No dust soft broom of minimum 1 mtr length, of superior quality |
| 51 | Rubber mop with steel handle of minimum 4 feet length, of superior quality |
| 52 | Mop with microfibre twist of minimum 4 feet length, of superior quality |
| 53 | PVC bucket of at least 20 litres capacity each, of superior quality |
| 54 | PVC mug of at least 1 litre capacity each, of superior quality |
| 55 | PVC/ rubber flexible pipe of 20 mm internal diameter, of superior quality |
| 56 | Total impact of GST for the purpose of CTC Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Percentage BoQ SCHEDULE - B BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited Name of work: Plinth protection, pathways, other civil works, and assistance to day-to-day operation and maintenance of main Water Treatment Plant; assistance to day-to-day operation and maintenance of water distribution network, cleaning of water tanks, and allied works at various places under CWS TadaliNIT no.: CWTD-CIV-E-22-2025-26, S. No. 2 Name of the Bidder/ Bidding Firm / Company : 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) S. No. Item Description (Item no. 1.01 to 1.10 & 1.12 to 1.46 are from CPWD DSR-2021;Item no. 1.11 & 1.47 are based on CPWD DSR-2021) Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount excluding GST inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 57 | Items from/ based on Standard Schedule of Rates: |
| 58 | Item code 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 59 | Item code 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. |
| 60 | Item code 2.25Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 61 | Item code 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 62 | Item code 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 63 | Item code 2.27Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 64 | Item code 5.9.1Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. |
| 65 | Item code 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 66 | Item code 5.22.6 & 5.22A.6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or More. |
| 67 | Item code 6.34.2 - (6.4.2 - 6.1.2)Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand). |
| 68 | Based on item code 6.34.2 of CPWD DSR-2021Brickwork with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor two level in: Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 69 | Item code 5.9.5Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 70 | Item code 5.9.19Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges. |
| 71 | Item code 5.3Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 72 | Item code 10.1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 73 | Item code 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 74 | Item code 12.51.1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). |
| 75 | Item code 10.13.1Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 76 | Item code 10.25.2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 77 | Item code 10.5.2Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 78 | Item code 15.41Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 79 | Item code 12.65.2Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.71 mm Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm. |
| 80 | Item code 14.5.1Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 81 | Item code 10.28Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 82 | Item code 22.14.1Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 83 | Item code 4.12Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 84 | Item code 11.3.1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 85 | Item code 11.21.1.1Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. |
| 86 | Item code 11.21.2.1Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. |
| 87 | Item code 11.20.4Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment. |
| 88 | Item code 13.1.212 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). |
| 89 | Item code 13.7.212 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). |
| 90 | Item code 13.18Neat cement punning. |
| 91 | Item code 13.16.16 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand). |
| 92 | Item code 14.1.1Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 93 | Item code 5.30Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 94 | Item code 13.85.3Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 95 | Item code 13.41.1 - item code 13.85.3Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete: Two or more coats, excluding priming coat. |
| 96 | Item code 13.81.1Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats). |
| 97 | Item code 13.47.1 - item code 13.85.3Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm, excluding priming coat). |
| 98 | Item code 13.112.2Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (one or more coats applied @ 0.83 ltr/10 sqm). |
| 99 | Item code 13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 100 | Item code 13.99.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 101 | Item code 14.75ACleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account).Note: This job is to be done twice in the contract period (at approx half-yearly intervals). The unit rate is for each time. |
| 102 | Item code 14.78Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.Note: This job is to be done twice in the contract period (at approx half-yearly intervals). The unit rate is for each time. |
| 103 | Item code 15.60Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 104 | Supplying the following materials of quality & brand as approved by the department, and putting them at designated places as per instructions of the department. The quantities to be supplied in installments as per the mutually agreed schedule between the contractor & the department. 1.47.01 Based on item code 0593 of CPWD DSR-2021C.P. Brass Extension Nipple (1/2\\"x2\\" size) 10.0 each 52.26 Excess(+) 1.0 Full Conversion INR 522.6 522.6 INR Five Hundred & Twenty Two and Paise Sixty Only 1.47.02 Based on item code 1034 of CPWD DSR-2021Bolts and nuts up to 300 mm in length 0.2 quintal 7351.8 Excess(+) 1.0 Full Conversion INR 1470.3600000000001 1470.3600000000001 INR One Thousand Four Hundred & Seventy and Paise Thirty Six Only 1.47.03 Based on item code 1219 of CPWD DSR-2021M.S. Wire nails 10.0 kg 69.0 Excess(+) 1.0 Full Conversion INR 690.0 690.0 INR Six Hundred & Ninety Only 1.47.04 Based on item code 1339 of CPWD DSR-2021Brass bib-cock 15 mm dia 10.0 each 324.74 Excess(+) 1.0 Full Conversion INR 3247.4 3247.4 INR Three Thousand Two Hundred & Forty Seven and Paise Forty Only 1.47.05 Based on item code 1342 of CPWD DSR-2021Brass stop-cock 15 mm dia 10.0 each 322.44 Excess(+) 1.0 Full Conversion INR 3224.4 3224.4 INR Three Thousand Two Hundred & Twenty Four and Paise Forty Only 1.47.06 Based on item code 1464 of CPWD DSR-2021S & S.C.I. standard specials upto 300 mm dia (heavy class) 0.5 quintal 5014.15 Excess(+) 1.0 Full Conversion INR 2507.075 2507.075 INR Two Thousand Five Hundred & Seven and Paise Seven Only 1.47.07 Based on item code 1545 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 15 mm dia 150.0 metre 157.18 Excess(+) 1.0 Full Conversion INR 23577.0 23577.0 INR Twenty Three Thousand Five Hundred & Seventy Seven Only 1.47.08 Based on item code 1546 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 20 mm dia 120.0 metre 195.07 Excess(+) 1.0 Full Conversion INR 23408.399999999998 23408.399999999998 INR Twenty Three Thousand Four Hundred & Eight and Paise Forty Only 1.47.09 Based on item code 1547 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 25 mm dia 150.0 metre 273.47 Excess(+) 1.0 Full Conversion INR 41020.50000000001 41020.50000000001 INR Forty One Thousand &Twenty and Paise Fifty Only 1.47.10 Based on item code 1548 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 32 mm dia 60.0 metre 348.06 Excess(+) 1.0 Full Conversion INR 20883.6 20883.6 INR Twenty Thousand Eight Hundred & Eighty Three and Paise Sixty Only 1.47.11 Based on item code 1549 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 40 mm dia 60.0 metre 421.18 Excess(+) 1.0 Full Conversion INR 25270.8 25270.8 INR Twenty Five Thousand Two Hundred & Seventy and Paise Eighty Only 1.47.12 Based on item code 1550 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 50 mm dia 60.0 metre 561.99 Excess(+) 1.0 Full Conversion INR 33719.4 33719.4 INR Thirty Three Thousand Seven Hundred & Nineteen and Paise Forty Only 1.47.13 Based on item code 1551 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 65 mm dia 30.0 metre 653.95 Excess(+) 1.0 Full Conversion INR 19618.5 19618.5 INR Nineteen Thousand Six Hundred & Eighteen and Paise Fifty Only 1.47.14 Based on item code 1552 of CPWD DSR-2021ISI marked medium class G.I. pipes with screwed ends: 80 mm dia 30.0 metre 850.93 Excess(+) 1.0 Full Conversion INR 25527.899999999998 25527.899999999998 INR Twenty Five Thousand Five Hundred & Twenty Seven and Paise Ninety Only 1.47.15 Based on item code 1649 of CPWD DSR-2021ISI marked Polyethylene water storage tank with cover and suitable locking arrangement 20000.0 per litre 7.33 Excess(+) 1.0 Full Conversion INR 146600.0 146600.0 INR One Lakh Forty Six Thousand Six Hundred Only 1.47.16 Based on item code 1878 of CPWD DSR-2021Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia 10.0 each 167.65 Excess(+) 1.0 Full Conversion INR 1676.5 1676.5 INR One Thousand Six Hundred & Seventy Six and Paise Fifty Only 1.47.17 Based on item code 1881 of CPWD DSR-2021Spun yarn 5.0 kg 63.25 Excess(+) 1.0 Full Conversion INR 316.25 316.25 INR Three Hundred & Sixteen and Paise Twenty Five Only 1.47.18 Based on item code 1922 of CPWD DSR-2021H.P. or L.P. ball valve (brass) with polythene floats: 15 mm dia 10.0 each 276.16 Excess(+) 1.0 Full Conversion INR 2761.6000000000004 2761.6000000000004 INR Two Thousand Seven Hundred & Sixty One and Paise Sixty Only 1.47.19 Based on item code 1923 of CPWD DSR-2021H.P. or L.P. ball valve (brass) with polythene floats: 20 mm dia 10.0 each 307.76 Excess(+) 1.0 Full Conversion INR 3077.6 3077.6 INR Three Thousand &Seventy Seven and Paise Sixty Only 1.47.20 Based on item code 1924 of CPWD DSR-2021H.P. or L.P. ball valve (brass) with polythene floats: 25 mm dia 300.0 each 299.68 Excess(+) 1.0 Full Conversion INR 89904.0 89904.0 INR Eighty Nine Thousand Nine Hundred & Four Only 1.47.21 Based on item code 1926 of CPWD DSR-2021ISI marked 20 mm dia Gunmetal gate valve with wheel 25.0 each 448.4 Excess(+) 1.0 Full Conversion INR 11210.0 11210.0 INR Eleven Thousand Two Hundred & Ten Only 1.47.22 Based on item code 1927 of CPWD DSR-2021ISI marked brass full way valve with C.I. wheel (screwed end) 25 mm dia 25.0 each 542.56 Excess(+) 1.0 Full Conversion INR 13563.999999999998 13563.999999999998 INR Thirteen Thousand Five Hundred & Sixty Three and Paise One Hundred Only 1.47.23 Based on item code 1928 of CPWD DSR-2021ISI marked brass full way valve with C.I. wheel (screwed end) 32 mm dia 5.0 each 492.58 Excess(+) 1.0 Full Conversion INR 2462.9 2462.9 INR Two Thousand Four Hundred & Sixty Two and Paise Ninety Only 1.47.24 Based on item code 1929 of CPWD DSR-2021ISI marked brass full way valve with C.I. wheel (screwed end) 40 mm dia 5.0 each 669.3 Excess(+) 1.0 Full Conversion INR 3346.5 3346.5 INR Three Thousand Three Hundred & Forty Six and Paise Fifty Only 1.47.25 Based on item code 1930 of CPWD DSR-2021ISI marked brass full way valve with C.I. wheel (screwed end) 50 mm dia 5.0 each 747.5 Excess(+) 1.0 Full Conversion INR 3737.5 3737.5 INR Three Thousand Seven Hundred & Thirty Seven and Paise Fifty Only 1.47.26 Based on item code 1932 of CPWD DSR-2021ISI marked brass full way valve with C.I. wheel (screwed end) 80 mm dia 5.0 each 1897.5 Excess(+) 1.0 Full Conversion INR 9487.5 9487.5 INR Nine Thousand Four Hundred & Eighty Seven and Paise Fifty Only 1.47.27 Based on item code 3311 of CPWD DSR-2021ISI marked C.I. sluice valve (with caps) class II : 100 mm dia 3.0 each 3660.37 Excess(+) 1.0 Full Conversion INR 10981.11 10981.11 INR Ten Thousand Nine Hundred & Eighty One and Paise Eleven Only 1.47.28 Based on item code 3317 of CPWD DSR-2021ISI marked C.I. sluice valve (with caps) class II : 150 mm dia 3.0 each 5641.35 Excess(+) 1.0 Full Conversion INR 16924.050000000003 16924.050000000003 INR Sixteen Thousand Nine Hundred & Twenty Four and Paise Five Only 1.47.29 Based on item code 3320 of CPWD DSR-2021ISI marked C.I. sluice valve (with caps) class II : 200 mm dia 2.0 each 11605.24 Excess(+) 1.0 Full Conversion INR 23210.48 23210.48 INR Twenty Three Thousand Two Hundred & Ten and Paise Forty Eight Only 1.47.30 Based on item code 4002 of CPWD DSR-2021Stainless steel bolts/square bar and plates 10.0 kg 156.37 Excess(+) 1.0 Full Conversion INR 1563.7 1563.7 INR One Thousand Five Hundred & Sixty Three and Paise Seventy Only 1.47.31 Based on item code 7122 of CPWD DSR-2021CP Brass Single lever telephonic wall mixer of approved make 5.0 each 5662.66 Excess(+) 1.0 Full Conversion INR 28313.3 28313.3 INR Twenty Eight Thousand Three Hundred & Thirteen and Paise Thirty Only 1.47.32 Based on item code 7257 of CPWD DSR-2021C.P. Brass bibcock 15 mm 15.0 each 385.02 Excess(+) 1.0 Full Conversion INR 5775.299999999999 5775.299999999999 INR Five Thousand Seven Hundred & Seventy Five and Paise Thirty Only 1.47.33 Based on item code 7258 of CPWD DSR-2021C.P. Brass long nose bibcock 15 mm 5.0 each 628.61 Excess(+) 1.0 Full Conversion INR 3143.05 3143.05 INR Three Thousand One Hundred & Forty Three and Paise Five Only 1.47.34 Based on item code 7259 of CPWD DSR-2021C.P. Brass long body bibcock 15 mm 5.0 each 609.82 Excess(+) 1.0 Full Conversion INR 3049.1000000000004 3049.1000000000004 INR Three Thousand &Forty Nine and Paise Ten Only 1.47.35 Based on item code 7260 of CPWD DSR-2021C.P. Brass stop cock (concealed) 15 mm 15.0 each 537.14 Excess(+) 1.0 Full Conversion INR 8057.099999999999 8057.099999999999 INR Eight Thousand &Fifty Seven and Paise Ten Only 1.47.36 Based on item code 7261 of CPWD DSR-2021C.P. Brass angle valve 15 mm 10.0 each 487.11 Excess(+) 1.0 Full Conversion INR 4871.1 4871.1 INR Four Thousand Eight Hundred & Seventy One and Paise Ten Only 1.47.37 Based on item code 7400 of CPWD DSR-202115 mm PTMT bib cock 50.0 each 91.71 Excess(+) 1.0 Full Conversion INR 4585.5 4585.5 INR Four Thousand Five Hundred & Eighty Five and Paise Fifty Only 1.47.38 Based on item code 7403 of CPWD DSR-202115 mm dia PTMT stop cock (male thread) 50.0 each 106.17 Excess(+) 1.0 Full Conversion INR 5308.5 5308.5 INR Five Thousand Three Hundred & Eight and Paise Fifty Only 1.47.39 Based on item code 7407 of CPWD DSR-2021PTMT push cock 15 mm dia 10.0 each 90.15 Excess(+) 1.0 Full Conversion INR 901.5 901.5 INR Nine Hundred & One and Paise Fifty Only 1.47.40 Based on item code 7416 of CPWD DSR-2021ISI marked C.I. double acting air valve 80 mm 2.0 each 5244.0 Excess(+) 1.0 Full Conversion INR 10488.0 10488.0 INR Ten Thousand Four Hundred & Eighty Eight Only 1.47.41 Based on item code 7495 of CPWD DSR-2021PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball 10.0 each 113.4 Excess(+) 1.0 Full Conversion INR 1134.0 1134.0 INR One Thousand One Hundred & Thirty Four Only 1.47.42 Based on item code 7496 of CPWD DSR-2021PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball 10.0 each 151.55 Excess(+) 1.0 Full Conversion INR 1515.5 1515.5 INR One Thousand Five Hundred & Fifteen and Paise Fifty Only 1.47.43 Based on item code 7697 of CPWD DSR-2021ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia 18.0 metre 1102.71 Excess(+) 1.0 Full Conversion INR 19848.78 19848.78 INR Nineteen Thousand Eight Hundred & Forty Eight and Paise Seventy Eight Only 1.47.44 Based on item code 7699 of CPWD DSR-2021ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia 18.0 metre 1641.94 Excess(+) 1.0 Full Conversion INR 29554.920000000002 29554.920000000002 INR Twenty Nine Thousand Five Hundred & Fifty Four and Paise Ninety Two Only 1.47.45 Based on item code 7700 of CPWD DSR-2021ISI marked S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia 18.0 metre 2790.04 Excess(+) 1.0 Full Conversion INR 50220.72 50220.72 INR Fifty Thousand Two Hundred & Twenty and Paise Seventy Two Only 1.47.46 Based on item code 7710 of CPWD DSR-2021S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300 mm dia 0.5 quintal 11156.98 Excess(+) 1.0 Full Conversion INR 5578.49 5578.49 INR Five Thousand Five Hundred & Seventy Eight and Paise Forty Nine Only 1.47.47 Based on item code 7858 of CPWD DSR-2021P.T.M.T. Urinal cock 15 mm dia 5.0 each 125.15 Excess(+) 1.0 Full Conversion INR 625.75 625.75 INR Six Hundred & Twenty Five and Paise Seventy Five Only 1.47.48 Based on item code 8636 of CPWD DSR-2021ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia, having thermal stability for hot & cold water supply 150.0 metre 57.5 Excess(+) 1.0 Full Conversion INR 8625.0 8625.0 INR Eight Thousand Six Hundred & Twenty Five Only 1.47.49 Based on item code 8637 of CPWD DSR-2021ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia, having thermal stability for hot & cold water supply 120.0 metre 88.22 Excess(+) 1.0 Full Conversion INR 10586.4 10586.4 INR Ten Thousand Five Hundred & Eighty Six and Paise Forty Only 1.47.50 Based on item code 8638 of CPWD DSR-2021ISI marked Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia, having thermal stability for hot & cold water supply 120.0 metre 140.55 Excess(+) 1.0 Full Conversion INR 16866.0 16866.0 INR Sixteen Thousand Eight Hundred & Sixty Six Only Total in Figures 3172399.424999999 3172399.424999999 INR Thirty One Lakh Seventy Two Thousand Three Hundred & Ninety Nine and Paise Forty Two Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
