|
| 1 | Supply & fixing of 12.5 Mtr. high mast shaft of appproved make with rising system hot dip galvanized, inside and outside, dip heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 and having no circumferntial weld, with accessories for high mast such as head frame suitable for 6 luminaries and its control gear boxes 0.75 H.P. power toll motor, 3 point suspension system with steel wire rope 6 mm dia double drem winch, including makingsuitable foundation as per manufacture drawing/site reuiment along with foundation bolts, nuts, washers, anchor plates etc. complete in all respect. As per SOR No 21.3 Lkm 2024 |
| 2 | Supply of aluminium conductor PVC insulated armoured 35.sq.mm 3-1/2 core cable complete in all respect. SOR No 20a.1.11 Lkm 2024 |
| 3 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughed glass/UV stablized PC cover and less built with mandatory driver set suitable for 170 to 200 watt. Confirming to IP 66, IK 07 and above+B17 protection complete in all respect.(20400-24000 system lumes, High powered LED with lenses >120 Lm/w, P.F>0.95, THD <10% at full load, CRI>70, Potted driver set in metal housing (Not Circutory) Phase to phase protection at 440v & >300 auto cut & restart feature, 4KV internal Surge Protection with 5 Year warranty) Sor 23.26 CAT AAA |
| 4 | Supply and burrying of 75 mm Dia 3 Mtrs. LongElectrode casted with maintenance free, conductiveconcrete, non corrosive mixture ( Ultra low Resistivecarbon 0.001 ohm/Mtr) in the ratio of 3:1:1 (marconite :cement : water) on M.S. Rod wiih hole (16 mm diameterX3 Mtrs ) will be vertically installed for earthing with 1Mtr G.I strip (25 mm X 2.5mm) connected with SS nutbolt. The earth electrode will be installed into the 100 mm pit up to 3000 mm depth. noraml soil will be used asbackfill material.As per SOR No 729 C Lkm 2018 |
| 5 | Supply and wiring of submain with four number 2.5sq.mm. FRLSH PVC insulated 1100 V grademultistrand single core copper conductor cable in 25mm dia heavy guage rigid steel conduit on surface withtwo number 14 SWG copper earth continuity wire etc.,complete in all respect.As per SOR No 1303 B Lkm 2018 |
| 6 | Supply and erection of factory fabricated and wiredmetal clad dust and vermin proof floor mountingpanel TPN switch board complete with thefollowing HRC type heavy duty TPN fuse switcheswith fuses and instrument chamber etc. complete inall respects. (a) 63 Amp. TNP-2 Nos.(ii) Cat. B. Cubicle Type As per SOR No 801 a(ii) Lkm 2018 |
| 7 | S/Fixing of GI pipe frame suitable for 8 no. 200 Watt LED light 8 way . ….complete item. MR |
| 8 | S/F of 900mm X 600mm from make with lettering of Granite signboard and photography on site. PSR |
| 9 | Supply and fixing of single unit LED aviationobstruction light complete with transformer and LEDspiral etc complete in all respect..As per SOR No 409 Lkm 2018 |
| 10 | Suppply & fixing of following sizes of medium class PVC conduit along with accessories in surfaces/recess including cutting the wall and making good the same in case of recessed conduit as required DSR 1.21.1 |
| 11 | Supply and fixing of brass nickle plated compressiongland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc. complete inall respect. The armouring of the cable shall be properlyconnected with the earth as per direction of Engineer-Incharge.As per SOR No 503 K Lkm 2018 |
| 12 | Supply and fixing of plain or pin type copper tin platedcable socket ( lug ) to the cable leads, insulating with tapeand making connection etc. complete in all respect as perdirection of the Engineer-Incharge..As per SOR No 504 F Lkm 2018 |
| 13 | C.E.F. 5% Less Please Enable Macros to View BoQ information |
