|
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. |
| 3 | Supplying and fitting fixing of following spare parts of approved quality suitable for submersible pump motor etc as per direction of the Engineer-in-charge.Full threaded nuts & bolts 12 mm dia, 50 mm long. |
| 4 | Supplying and fitting fixing of rubber insertion 3 mm thick of 150 mm dia to the G.I Column pipes as per direction of the Engineer-in-charge. |
| 5 | Providing & fabrication of column pipe including fitting fixing of G.I flange by cutting the GI pipe (conforming to IS:1239 medium class) into 3.05 mtr long and welding the same with GI flange as per specification and direction of the Engineer-in-charge. (G.I pipe will be provided by the agency at his own cost & risk) |
| 6 | i) 100 mm dia G.I pipe with 10 mm thick GI flange |
| 7 | i) 80 mm dia G.I pipe with 10 mm thick GI flange |
| 8 | iii) 65 mm dia G.I pipe with 10 mm thick GI flange |
| 9 | Providing and fitting fixing with PVC insulated 3 core flat cable Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge |
| 10 | i) 6.0 sqmm |
| 11 | ii) 4.0 sqmm |
| 12 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 13 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 14 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 15 | Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 16 | Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 17 | i) Bronze / SS Impeller |
| 18 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 19 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 20 | iv) Cast iron grade (FG200) discharge casing |
| 21 | v) Cast iron grade (FG200) suction casing |
| 22 | vi) Cast iron grade (FG200) pump bowl / diffuser |
| 23 | vii) SS Impeller lock |
| 24 | viii) SS half coupling |
| 25 | ix) Stud bolt & nut |
| 26 | x) Dismantling, repairing, reassembling, servicing |
| 27 | Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 28 | i) Bronze / SS Impeller |
| 29 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 30 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 31 | iv) Cast iron grade (FG200) discharge casing |
| 32 | v) Cast iron grade (FG200) suction casing |
| 33 | vi) Cast iron grade (FG200) pump bowl / diffuser |
| 34 | vii) SS Impeller lock |
| 35 | viii) SS half coupling |
| 36 | ix) Stud bolt & nut |
| 37 | x) Dismantling, repairing, reassembling, servicing |
| 38 | Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 39 | i) Bronze / SS Impeller |
| 40 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 41 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 42 | iv) Cast iron grade (FG200) discharge casing |
| 43 | v) Cast iron grade (FG200) suction casing |
| 44 | vi) Cast iron grade (FG200) pump bowl / diffuser |
| 45 | vii) SS Impeller lock |
| 46 | viii) SS half coupling |
| 47 | ix) Stud bolt & nut |
| 48 | x) Dismantling, repairing, reassembling, servicing Please Enable Macros to View BoQ information |
