|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, asdirected by Engineer-in-charge. All kinds of soil |
| 2 | Dry stone pitching ( any thickness ) including cost of stone. |
| 3 | Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 gradedstone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Providing & fixing upto floor five level precast cement concrete solid blocks includinghoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost ofrequired centring, shuttering and curing complete1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominalsize) |
| 8 | Suspended floors, roofs, landings, balconies and access platform |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).Second class Kail wood |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)non-decorative type, core of block board construction with frame of 1st classhard wood and well matched commercial 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews |
| 11 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts andscrews etc. complete :300x16 mm |
| 12 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type)with necessary screws etc. complete : 200x10 mm |
| 13 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 withnecessary screws etc.complete :125 mm |
| 14 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 15 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 16 | Carriage of material Cement ….................... 160 km |
| 17 | Sand avg lead ….................. 5km |
| 18 | Stone aggrtegate avg lead …............25 km |
| 19 | Soling stone avg lead 1…............... Km Please Enable Macros to View BoQ information |
