Tender For Estimate For Construction Of Samshan Ghat (Boundary Wall,Steel Work,Shed,Plaster, Whitewash) In Ajnoli Under Municipal Corporation Una(H.P.)., Una-Himachal Pradesh
TDR : 54717966
Tender Notice
BOQ
1 Days Left
Una
Himachal Pradesh
Tender For Estimate For Construction Of Samshan Ghat (Boundary Wall,Steel Work,Shed,Plaster, Whitewash) In Ajnoli Under Municipal Corporation Una(H.P.).
Name of Work:- ESTIMATE FOR CONSTRUCTION OF SAMSHAN GHAT (BOUNDARY WALL,STEEL WORK,SHED,PLASTER, WHITEWASH) IN AJNOLI UNDER MUNICIPAL CORPORATION UNA(H.P.).
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock
2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and gradedstone aggregate 40mm nominal size)1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3
Brick work 7cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructureabove plinth level and upto floor five level.
4
class designation 7.5 in foundation and plinth 6.1.2 Cement mortar 1:6(1 cement: 6 coarse sand)
5
13.1 12mm cement plaster of mix :13.1.1 1:4 (1 cement: 4 fine sand)
6
Finishing walls with water proofing cement paint of required shade
7
providing and laying 60mm paver block M-30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge.
8
Steel work welded in built-up sections/ framed work including cutting. hoisting. fixing in position and applying a priming coat of approved steel primer in gratings.frames,guard bars,ladders, railings,brackets, gates and similar works for shed with height 6 m and gate 4x3m.
9
providing G.S Sheet. limpet washers or with G.l. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
