|
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Goods Service tax, toll tax, sale tax or any other taxes imposed by the Government. |
| 3 | Providing and laying in cement concrete grade 1:3:6 (one cement :three coarse sand :six graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in Stairs, (excluding landings) except spiral stair cases as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete work M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work and reinforcement for reinforced concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 6 | Providing steel reinforcement and Thermo-Mechanically Treated bars of grade Fe-500D or more approved make i.e. SAIL, RINL,Shyam Steel/TISCO, Jindal Panther (JSPL) for reinforced cement concrete work including bending cutting straightning and placing in position binding all complete upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. |
| 8 | Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall ncluding disposal of rubbish to the dumping ground within a Lead of 20 metres with:-Cement Mortar 1:4. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions make of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge for fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 10 | Providing and fixing aluminium work for doors, windows, ventilators and partitions ake of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 11 | Providing and fixing fly proof Stainless steel (grade 304) wire gauze of 0.5 mm (zero point five millimeter) dia wire and 1.4 mm (one point four millimeter) aperture on both sides wire gauge to windows clerestory windows and doors with M.S. Flat 15x3 mm (fifteen into three millimeter) and nuts and bolts complete.including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 12 | Providing and fixing 12mm (twelve millimeter) thick make of Novapan, Kitply, National Archid Ply, Action Tesa, Green Pre-laminated particle board with decorative lamination on both sides,flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 15 | Providing and fixing 300x10mm (three hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 16 | Providing and fixing 250x10mm (two hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 17 | Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 18 | Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 19 | Providing and fixing aluminium hanging floor door stopper.ISI(Indian Standards Institute) marked, anodised (anodic coating not less then grade AC 10(ten) as per IS :1868 (indian standard one thousand eight hundred sixty eight ) transparent or dyed torequired coluor and shade,with necessary screws etctra complete. Twin rubber stopper including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 20 | Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer J.K wall Putty/ Brila White Putty, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat Berger (castle) Jenson & Nicholson Paints, Aqualac make with cement primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 22 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface, excluding grading, complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 23 | Providing and laying kota stone slab 20mm (twenty millimeters) thick in risers of steps, skirting dado and pillars laid in 12mm (twelve millimeters) thick in cement mortar 1:3 (one cement: three sand) and jointed with grey cement with pigment to match of the shade of the slab including rubbing and polishing complete in all heights as per direction of Engineer- in –Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 24 | Providing and laying 50 mm(fifty millimeter) thick with 20 mm (twenty millimeter) nominal size stone aggregate Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded/crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 25 | 15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 ( one cement : four Fine sand) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 26 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 27 | Providing and laying factory made chamfered edge Cement Concrete paver blocks 80mm (Eighty millimetre) thick of M-30 (thirty) grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm(fifty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete as per CPWD specification 2019 including carriage of materials up to all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
