|
| 1 | Running expenditure of pumphouses which includes complete operation of pump motor, maintenance of log books as directed by engineer-in-charge, general up keeping of promises, security arrangements, cleaning & desilting of sump wall once every six months daily value operation under campus of pump house & all other works as mentioned in scope of work in tender document for per pump house per month (excluding repairing of pump machinery) up to 50 HP. |
| 2 | Rewinding of there phase squirrel cage including motor of 1400 to 2800 RPM including all necessary material & of the same characteristics As original with required size of super enameled wore ‘E’ class insulation material or testing etc. as required. Replacement of material or components shall be use as per guidelines of O&M of original product. All the scrap material should be retained by contractor up to 15 HP. |
| 3 | Maintenance of pipelines irrespective of size &material which includes repairing of Bursts & Leakages Pollution control, survey & removal of choking, repairing by digging out suitable size of pit in soft & loose soil/hard soil including cutting of Black top, WBM & CC top of road of any size at work site include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof & then refilling of exacted trench/ pit /road should be done properly work includes daily patrolling & repair the leakages within stipulated time & complete maintenance of pipeline network within the scope of work for per km pipe line per month. |
| 4 | Maintenance & repairing of generators, Iron Jalis, Chain pulleys, inlet & outlet pipes of pumps, pipe bends, coarse screens, panels, cables (from electrical meter to panel, panel to pump), Grider in pump house, guide pipe, pump body cover, impeller, green pipe, pipe joints other miscellaneous mechanical & electrical items related to pump houses etc. with complete material on cost of contractor. |
| 5 | Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). Upto 3.0 m depth |
| 6 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M, Shaft SS 410, mechanical seal with 10M Power & Control cable, 5M Galvanized Chain,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 160 cum/hr and head 11 TO 15 M |
| 7 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M, Shaft SS 410, mechanical seal with 10M Power & Control cable, 5M Galvanized Chain,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 160 cum/hr and head 16 TO 20 M |
| 8 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M, Shaft SS 410, mechanical seal with 10M Power & Control cable, 5M Galvanized Chain,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 160 cum/hr and head 21 to 25 M |
| 9 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 840 cum/hr and head 16 TO 20 M |
| 10 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 220 cum/hr and head 21 TO 25 M |
| 11 | Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck Foot Bend, with Guide wire SS 304 etc. complete with all respect as per specification Discharge 220 cum/hr and head 26 to 30 M |
| 12 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing uPVC pipe fittings/ accessories of class III (6 Kg/sqcm) confirming to IS:7834 suitable for potable water with rubber rings joints in uPVC pipe line at all levels/ depth including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Equal Tee (Moulded) welded with socket 200mm dia |
| 13 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing uPVC pipe fittings/ accessories of class III (6 Kg/sqcm) confirming to IS:7834 suitable for potable water with rubber rings joints in uPVC pipe line at all levels/ depth including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.Equal Tee (Moulded) welded with socket 225 mm dia |
| 14 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. 200mm dia |
| 15 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately. 225 mm dia |
| 16 | Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. MS pipe upto 600mm dia (with minimum 5mm thickness sheet) |
| 17 | Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) |
| 18 | S & F of STAR DELTA STARTER IN THE EXISTING PANEL WITH FOLLOWING RATING 22 KW |
| 19 | S & F of STAR DELTA STARTER IN THE EXISTING PANEL WITH FOLLOWING RATING 30 KW |
| 20 | S & F of STAR DELTA STARTER IN THE EXISTING PANEL WITH FOLLOWING RATING 18.5 KW |
| 21 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90% purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1.5 Sq.mm 3 core flat / Round |
| 22 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2.5 Sq.mm 3 core flat / Round |
| 23 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4.0 Sq.mm 3 core flat / Round |
| 24 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6.0 Sq.mm 3 core flat / Round |
| 25 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 10.0 Sq.mm 3 core flat / Round Please Enable Macros to View BoQ information |
