|
| 1 | M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.complete all as specified and as directed. |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50mm and n exc 100 mm deep and area not exc 400 sqm complete all as specified and as directed. |
| 3 | M&L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) with lime stone, sand stone, flint or quartzite, spread, rolled and consolidated to gradient and camber required with 8 to 10 ton power roller, complete all as specified and as directed. |
| 4 | M&L for Premix bituminous macadam (consolidated thickness exc. 50 mm & n.ecx 75 mm) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed. |
| 5 | M&L for preparing of unsurfaced water Bound macadam/bituminous macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 7.5 kg per 10 Sqm. |
| 6 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer (paving bitumen) at 5 kg / 10 sqm complete all as specified and directed. |
| 7 | M&L for Bituminous premix asphaltic Semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 8 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as permanufactures instructions etc. all as specified and directed |
| 9 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 10 | M&L for applying 2.5 mm thick road marking strips (retro-reflective) of specified and shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads distemper, propane tank heater and shoe heater, driven by an experienced operator on road surface including cost of material, Labour, T&P cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed. |
| 11 | Demolition of lime concrete in ground floors and paving not exceeding 15cm thickness (below or above GL) complete all as specified and directed by Engineer in charge. |
| 12 | M&L for 50 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 13 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 14 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boardsof 900 mm diametre with support length of 3750 mm and made up of 2 mm thickaluminium sheet, face to be fully covered with high intensity encapsulated type heat activatedretro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bi-lingual), symbols andborders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shallbe activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 andfixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frameof M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted andfixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Teesection ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom endand including making holes in pipes, angles flats, providing & fixing M.S. message plate ofrequired size, steel work to be painted with two or more coats of synthetic enamel paint ofrequired shade and of approved brand & manufacture over priming coat of zincchromate yellow primer (vertical MS-Tee support to be painted in black and whitecolours).Backside of aluminium sheet to be painted with two or more coats of epoxy paintover and including appropriate priming coat including all leads and lifts etc. complete asper drawing , specification and direction of Engineer-in-charge. |
| 15 | Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards ofequilateral triangular shape having each side of 900 mm with support length of 3650 mmand made up of 2 mm thick aluminium sheet, face to be fully covered with high intensityencapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D4956-01 in blue and silver white or other colour combination including subject matter, message(bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesivebacking which shall be activated by applying heat and pressure conforming to class -2 ofASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cmc/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistantmeasures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical postmade up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mmat the bottom end and including making holes in pipes, angles flats, providing & fixing M.S.message plate of required size, steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufacture over priming coat of zincchromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paintover and including appropriate priming coat including all leads and lifts etc. complete asper drawing , specification and direction of Engineer-in-charge Please Enable Macros to View BoQ information |
