|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 6 | 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 15 | Above 40 mm nominal bore |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 17 | 25 mm dia nominal bore |
| 18 | 80 mm dia nominal bore |
| 19 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 20 | 50 to 80 mm nominal bore |
| 21 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 22 | 25 mm nominal bore |
| 23 | 80 mm nominal bore |
| 24 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 25 | 25 mm diameter pipe |
| 26 | 80 mm diameter pipe |
| 27 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 28 | 80 mm nominal bore |
| 29 | Providing and fixing G.I. flanges at each joint including necessary rubber gasket, nuts & bolts etc. as per the direction of Engineer-in-charge. |
| 30 | 80 mm nominal bore |
| 31 | Constructing masonary chamber with CC 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) 100mm thick wall for gate valve/stop cock, with top cover 4 mm thick M.S. sheet with required hinges fixing etc., including necessary excavation, foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and 12 mm thick inside & outside plastering with cement mortar 1:4 (1 cement : 4 coarse sand) with locking arrangement (lock & key) all complete as per standard design and direction of Engineer-in-charge. a) 60x60x45 cm inner size. |
| 32 | Providing and fixing G.I. plug with required thread seal all complete as per the direction of Engineer-in-charge. |
| 33 | 80 mm dia G.I. Plug. Please Enable Macros to View BoQ information |
