|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and as directed. |
| 3 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and as directed. |
| 4 | M/L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm (graded stoneaggregate, exc. 10 cm in width and setting in mortar,complete all as specified and as directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 7 | M&L rendering 15mm thick on fair faces of bricks cement concrrete surface CM 1:4 finish even & smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for cement concerte 1:3:6 type C2 (using 40MM graded stone agg.) in Cement concrete in surface channels and drains incl demolition of old cement concrete and removal od debris from site complete all as specified and as directed. |
| 9 | M&L for reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, dia of pipe 450mm. Demolition & breaking up drain pipe (salt glazed, AC or reinforced concrete ) set in cement mortar for 450 mm dia pipe complete all as specified and as directed. |
| 10 | M&L for PCC ( 1:4:8) type D2 (using 40 mm graded stone aggregate ) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC Pipe complete all as specified and as directed. |
| 11 | Cleaning of existing drain (dry or liquid mud) to any size or depth and removing mtrl from site to a distance exc 500 m from starting point where complete all as specified and as directed. |
| 12 | Extra for forming fair finished drain or channel 40 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed. |
| 13 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, rubber moulded finish,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; incl Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 14 | M & L Chequered cement concrete tiles glossy fiinish/ rubber moulded 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and incl screed bed/ bedding layer 20 mm thk in cm 1:6 incl demolition of old tiles/ stone slab of any description and reomving from site complete all as specified and as directed. |
| 15 | M & L 75 mm thk for cement concrete type D2, 1:4:8 (40 mm gr Aggr) as in sub floor incl demolition of old cement concrete and removal of debris from site complete all as specified and as directed. |
| 16 | M & L Dismanteling fencing wire mesh , any type complete all as specified and as directed. |
| 17 | M & L Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good complete all as specified and as directed. |
| 18 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in concrete for fencing post in walls incl formwork complete all as specified and as directed. |
| 19 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and as directed. |
| 20 | Dismantling wrought iron, cast iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 21 | Dismantling old u/s RCC jali/ grill of any thciknes and of any type complete all as specified and as directed. |
| 22 | Cutting holes/ in stone masonry/ brick/ concrete/ PCC block masonry wall for fixing angle posts or similer wk incl removing dismantled portion from site complete all as specified and as directed. |
| 23 | S & F Cast iron work grade FG 150, unmachined, in brackets,gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed. |
| 24 | S&F framed work for doors for gate/ grill of MS Pipe, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) complete all as specified and as directed. |
| 25 | S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size complete all as specified and as directed. |
| 26 | M&L for two coat of synthetic enamal (ordinary tint) new surfaces of any description incl prepn of new surfaces of steel ,over 10cm in width or girth,not otherwise described complete all as specified and as directed. |
| 27 | S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel complete all as specified and as directed. |
| 28 | S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank complete all as specified and as directed. |
| 29 | Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and as directed. |
| 30 | Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and as directed. |
| 31 | M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. Please Enable Macros to View BoQ information |
