|
| 1 | SCAN COPY OF ESTIMATE IS ATTACHED SEPERATELY. |
| 2 | Providing & fixing at site as per design made from plaster of paris to finish in level layer thickness varies form 6mm to as per required. Item inclusive of finished smooth with float coat of plaster of paris also grooves and cutting as per design requirment. Item is excluding plastic emulsion paint over primer.Only Covered area shall be measured. |
| 3 | Supply and fixing of wooden wall panelling upto height as specified having an internal frame work of anti termite treated pine wood sections of 2\\" x 1.5\\" sections - 2' c/c distance both ways with a covering of 12mm BWR plywood and a pattern of laminates, 1.0mm laminate on one side of approved make and shade with coloumns and bands as per design and a pattern of grooves etc. as per details and specifications including provision of windows as per size. To be finished with Emulsion paint. Proper arrangement as per detail shall be made for providing electrical wires and misc. cables at 2'6\\" ht. and at skirting level. this is highlighted on the finished partition with the help of grooves/ projections as per detail. 4mm grooves to be provided vertically at specified distance. The grooves to be painted in approved color. 3/4\\" x 1/2\\" T.W beading of approved deisgn to be provided at skirting and at junction of false ceiling level. Polish to be done at all exposed surfaces of teak wood in approved shade. As per direction of Engineer-in Charge . |
| 4 | Providing and fixing Charcoal moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete .As per direction of Engineer-in Charge |
| 5 | Providing & Fixing paintable 12 mm thick Acoustical Louvers wall panel system made from 125-150mm wide & 2440mm Length. MDF Perforated grooved Panel with 2-4mm thick grooved & 10-13mm thick Pitch. with 2mm thick backing of Polyester fibre FR grade Acoustical Felt Panel to be fixed with Tongue and groove arrangement fixed on aluminum channel at 750mm distance perpendicular to panel with G.I. clips. Aluminum channel to be fix on G.I. Section of size 45mmx12mmx0.90 mm thick intermediate channel. 50 mm thick & 48 kg density Rockwool Fire class A-1 as per EN13501 NRC 0.88 to be fill in air gap the total acoustical paneling system finished in proper line & level. as per satisfaction by Engineer in charge. mm thick intermediate channel. 50 mm thick & 48 kg density Rockwool Fire class A-1 as per EN13501 NRC 0.88 to be fill in air gap the total acoustical paneling system finished in proper line & level. as per satisfaction by Engineer in charge. |
| 6 | Providing and fixing BWR Sandwich HDHMR ply wood frame with veneer finish as per Architect drawing and 40-45 mm thk. Solid core Flush door finished in veneer on both sides fixed with SS bearing hinges with heavy duty door closer , mortise locking arrangement as per Architectural specifications.The door shall be polished with three coats of melamine polish over wood polish. Necessary groove design and beading design shall also be provided as per detail drawing etc. all complete. size 1.2 m x 2.1 m |
| 7 | Providing and fixing BWR Sandwich HDHMR ply w door frame with veneer finish as per Architect drawing and 40-45 mm thk. Solid core Flush door finished in veneer on both sides fixed with SS bearing hinges with heavy duty door closer , mortise locking arrangement as per Architectural specifications.The door shall be polished with three coats of melamine polish over wood polish. Necessary groove design and beading design shall also be provided as per detail drawing etc. all complete. size0.90 m x 2.1 m |
| 8 | LAMINATED WOODEN FLOORING - Providing and laying wooden HDF board flooring 8mm thick-class of use 23(31) AC-3 (as per the EN-13329), with 0.2mm direct laminate on top of specially develop substrate core Dura Core 375, plank size 1285mm x 195mm having Docklock tounge and groove construction with edge impregnated with Duraseal, to secure long lasting joints secured including suitable mineral based subfloor without any undulations. Installation using high moisture resistant polythylene sheet and hush factor water resistant linked polymer based international standard with company trained installed of wooden laminate flooring as per direction of Engineerincharge.The underlayer has to be a 0.2 mm thick Alkali resistance polythylene sheet denisty 920-935 kg/cum with a l.5mm thick extruded polythylene foam denisty 30-32kg /cum on top to secure the floating floor installation. a) Providing PERGO / ARMSTRONG wooden flooring including beading and skirting minimum of 60mm /100mm high close matched to the décor of panels |
| 9 | Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. |
| 10 | Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 13 | Providing and fixing of roller blinds / vertical blinds of washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour and company as per director by Engineer-In-Charge. |
| 14 | Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge. (including loading, unloading, upto top floor, scaffolding etc. complete as required.) |
| 15 | Providing and fixing Planters with plant and pabble - any size made up of FRP (Fiber Reinforce Plastic as per selected design detail. (including loading, unloading, etc. complete) |
| 16 | TABLE :DIRECTOR'S OFFICE TABLE ( 8'-0\\"x 2'-6\\"/3.0' x 2'-6\\" ht.):Table to be made using 18mm thick BWR Grade Plywood board for the verticals with intermediate supports in between the table with all exposed surfaces fixed with 4.0mm thick veneer of approved shade and design, fixed as per design and drawing, and all internal surfaces painted in three coats of enamel paint over lappam finish with necessary surface preparations. All the veneer surfaces should be melamine polished to the required finish. (Matt Finish)The table top shall be with dual top with 12mm thick tinted/frosted glass. The edges of the glass shall be bevelled (bull nosed on to both the edges). The table top shall be 18mm thick BWR Grade Plywood board with 1mm thick laminate. Table shall have one below storage unit of of size(1'-6\\"x2'-0\\"x2'-0\\"), rack for CPU, Ebco Keyboard tray, Foot rest shall be made out of 18mm thick plywood topped with veneer with sectional size 4\\"x1.5\\". The table shall be provided with a wire manager. The glass top shall be fixed with the supports of stainless steel studs of 3\\"mm dia with a gap of 4\\" from the plywood top. Independent Storage Units of size1'-6\\" wide x 2'0\\" height x 2'0\\"deep shall be made and put in position. The unit shall have three draws as per detail sliding on telescopic draw channels of standard make. The sizes of the draws shall vary as per detail and the bottom draw shall have provision for vertical file storage. The draws shall be made in 18mm and 12mm (18mm for the sides and 12mm for the bottom) BWR Grade Plywood. The exposed outer surfaces shall be fixed with 1mm thick laminate of approved shade and grains as per design and pattern suggested. 6\\" wide SS handles shall be provided for the draws.Side Multi-drawer lock for 3 draws make or equivalent in 1 strip locking with side locking arrangement shall be provided for the three draws together. Beading for all the exposed surfaces shall be of beachwood of the required size and design, as per the drawing. Design as approved by Engineer-In-charge. |
| 17 | Providing And Placing of Executive Revolving Leather Highback Chair : The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring core, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette.The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub assembly and upholstered in natural leather or leatherette 3. ARMPAD ASSEMBLY: The armpad assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, layered with foam of 60 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette.CENTER TILT WITH MULTI POSITION LOCK MECHANISM : The mechanism is designed^th the following features : 360° revolving type 3 position locking Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 6. PEDESTAL ASSEMBLY : The pedestal Is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface. It is fitted with 5 castors and has a pitch-center diameter of 67.5±0.5 cm (77.5±1.0 cm with castors). 7. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black polyamide. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In charge |
| 18 | REAR STORAGE UNITS FOR THE TABLES: To be of sizes as indicated in the drawings and made in 18mm thick BWR Grade Plywood for all verticals and horizonal members . All external exposed surfaces including the back surface to be fixed with 1.0mm thick laminate of approved shade and design as per the pattern suggested by the Architects, and all internal surfaces painted in three coats of enamel paint over two coats of lappam finish with necessary surface preparations. Back of the storage unit shall be fixed with 6mm thick BWR Grade Plywood . The shutters,draw facias and tops of storage units shall postformed made in 18mm thick BWR grade ply with 1mm laminate as per detail. The unit shall have shutters and draws as per the sizes indicated in the drawings with godrej locks. The fixing of screws into the plyboard shall be using nylon bushes to ensure fixity. The shutters shall be fixed with box type spring hinges, tower bolts and the draws shall slide on telescopic channels.Depth will varies from 14\\" to 18\\". commissinor sir office back side |
| 19 | Providing & Placing of CENTER TABLE : The table should be of size 1000W x 600 D x 428 H with Glass top of 12 mm thick tempered and Solid teak wood legs and frame with bottom shelf. Duely finished with melamine polish . Design as approved by Engineer-In-charge. |
| 20 | Providing & Placing of CORNER TABLE : The table should be of size 500 W x 500 D x 428 H with Glass top of 12 mm thick tempered and Solid teak wood legs and frame with bottom shelf. Design as approved by Engineer-In-charge. |
| 21 | Providing And Placing of Visitor Chair Fixed : The chair having SEAT/BACK ASSEMBLY made up of 1.2 ±O.1cm. thick hot-pressed plywood and upholstered with-fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat to be extra thick foam on front edge to give comfort to popliteal area. BACK SIZE shall be 47.5 cm. (W) x 58.0 cm. (H)and SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) with HIGH RESILIENCE (HR) POLYURETHANE FOAM to be.moulded with density =45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The ARMRESTS :The one-piece armrests are injection moulded from black Co. polymer Polypropylene. The reading chairs shall have TUBULAR FRAME which is powder coated (OFT 40-60 microns) tubular frame is cantilever type & made of 02.54 ±0.03cm. x 0.2 ±0.016cm.thick. M.S. ER.W. Tube. Design as approved by Engineer-In charge. |
| 22 | Fully Upholstered Sofa - Providing And Placing of Premium 3 Seater Sofa : The 3 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 2010(W) x 865(D) x 970(h). Approved Furniture Make - Godrej (CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 23 | Repair of Visitor Chair (welding, painting, cushion replacement) |
| 24 | Repair of Revolving Chair (hydraulic replacement, wheel set, base repair, cushion tightening) |
| 25 | Laying and Jointing PVC Pipe. HeadingRepair of Office Sofa (2-seater/3-seater—re-upholstery, foam, stitching, polish) |
| 26 | Cushion Seat & Back Replacement (foam + fabric) |
| 27 | Minor Carpentry Repair (tightening joints, screws replacement) |
| 28 | Painting/Polishing of Wooden Furniture |
| 29 | Wheel Set Replacement for Revolving Chairs (set of 5) |
| 30 | Hydraulic Gas Lift Replacement (ISI marked) |
| 31 | SCAN COPY OF ESTIMATE IS ATTACHED SEPERATELY. |
| 32 | Interior Renovation Work for Office Spaces under Municipal Corporation Rewa (M.P.) Please Enable Macros to View BoQ information |
