|
| 1 | B/R PORTION |
| 2 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft soil complete all as specified and as directed. |
| 3 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, taking out/laying UG cable etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out in soft soil complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 6 | Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 7 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 8 | M&L for RCC Type B1 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in foundation rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete filling and mass concrete complete all as specified and directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 9 | M&L for RCC Type B1 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in Fplinth beam for column etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 10 | M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item. |
| 11 | M&L reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded granite stone aggregate in columns, pillars, piers, posts, struts and the like complete, all as specified and directed. Note :- Reinforcement and formwork shall be measured and paid for separately. |
| 12 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 14 | S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc complete all as specified & as directed. |
| 15 | M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and as directed. |
| 16 | S&F Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 17 | S&F anodised aluminium snap grid frame work of size 605x605 for false ceiling along with hangers 6 mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x30 mm size 60 mm long and expansion hold fastners 12.5 mm dia 40 mm long complete all as specified and as directed |
| 18 | M&L for 4mm thick non-AC-E Board of size (595x595mm) fixed in ceilings and applying one coat of distemper oil emulsion including prerparation complete all as specified and as directed |
| 19 | M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan not exceeding 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 20 | M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick wall , built in CM 1:4 complete all as specified and as directed. |
| 21 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, Rough finished surfaces of concrete flat complete all as specified and as directed |
| 22 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat complete all as specified and as directed |
| 23 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and as directed. |
| 24 | M&L for Factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing complete all as specified and as directed. |
| 25 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed. |
| 26 | M&L 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 27 | S&F of 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two or three panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed. |
| 29 | M&L for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating complete all as specified and directed. |
| 30 | Supply and fixing 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 31 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed. Length of bolt omplete all as specified and as directed. |
| 32 | S&F 125 mm aluminium handles cast type, anodised complete all as specified and as directed. |
| 33 | S&F Butt Hinges 100 mm long heavy weight cold rolled mil steel omplete all as specified and as directed. |
| 34 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of zinc chromate primer complete all as specified and directed. |
| 35 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with stainless steel wire staples fixed complete all as specified and directed. |
| 36 | M&L for 75 mm thick providing cement concret type D-2 (1:4:8) using 40 mm graded stone aggregated for sub-base complete all as specified and as directed. |
| 37 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 38 | M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, finished the surface fair and even complete all as specified and as directed. |
| 39 | M&L PCC (1:3:6) type C2 (40 mm graded aggregate ) in surface chanel and drain complete all as specified and as directed. |
| 40 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stopped ends complete all as specified and as directed. |
| 41 | Material and Labour for broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 42 | M&L for non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:6) complete all as specified & as directed. |
| 43 | M&L for glazed ceramic (coloured) tiles of size 350x250x7mm / 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing course in cement mortar (1:3) complete all as specified and as directed. |
| 44 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished the surface fair and even complete all as specified. |
| 45 | M&L for 15mm thick rendering with cement mortar (1:4) on other than fair faces of brick work or concrete surfaces in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 46 | M&L for preparation of new plastered surface of wall & applying two coats of cement base paint over a coat of cement base primer complete all as specified and as directed. |
| 47 | M&L for preparation of old plastered surface of wall and applying distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification complete all as specified and directed |
| 48 | Supply only WPC (best quality) of approved make complete all as specified and as directed. |
| 49 | S&F 25mm Gun-metal, globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 50 | S&F 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 51 | Supply and fixing PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as directed. |
| 52 | Supply and fixing PVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement complete all as specified. |
| 53 | S&F 15mm bib tap, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for bass ferrule fixed complete all as specified and as directed. |
| 54 | S&F Wash basins, Vitreous China (flat back or angle back type) 550x400 mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and including waste pipe complete all as specified and as directed. |
| 55 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 56 | S&F 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm complete all as specified and as directed. |
| 57 | S&F 600 x 450mm bevelled edge mirror of selcted quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 58 | S&F soap dish, vitreous china, white, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws complete all as specified and as directed. |
| 59 | Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and as directed. |
| 60 | S&F tubular towel rail 20mm dia,D Type 600 mm long between flanges aluminium anodised complete all as specified and as directed. |
| 61 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.\\" |
| 62 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 63 | S&F steel tubes medium grade galvanised 15 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 64 | S&F steel tubes medium grade galvanised 20 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 65 | S&F Pillar taps 15mm, cast copper alloy fancy type, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed |
| 66 | S & F vitreous china pedestal pattern (European type) white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing complete all as specified and as directed. |
| 67 | S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified. |
| 68 | S&F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated complete all as specified and directed |
| 69 | M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) position including necessary form work and set in CM (1:4) complete all as specified and as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 70 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed. |
| 71 | S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 72 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 73 | S&F 110mm bore PVC ( SWR) vent cowl complete all as specified and directed. |
| 74 | M&L for 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 75 | M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 76 | M&L for preparation of old plastered surface complete removal or unplastered surface of wall and applying distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification complete all as specified and directed |
| 77 | M&L for preparation of oldw plastered surface of wall & applying two coats of cement base paint over a coat of cement base primer using autoroller to make surface uniform complete all as specified and as directed. |
| 78 | M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and as directed. |
| 79 | M&L for preparation of old painted surface applying a coat of synthetic enamel paint on wooden surface over 10cm grith complete all specified and as directed. |
| 80 | M&L for 110mm dia pipe cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth and fair complete all specified and as directed. |
| 81 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gery cement and no pigment including screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 82 | E/M PORTION Please Enable Macros to View BoQ information |
| 83 | E/M PORTION Please Enable Macros to View BoQ information |
