Tender For Repair,Repainting Of Steel Furniture And Repair, Re-Canning Polishing Of Wooden Furniture At Unit Lines, Married Accn And Furniture Under Ge 869 Ews At Leimakhong Mil Stn., Leimakhong-Manipur

TDR : 54714344

Tender Notice
BOQ

13 Days Left

Leimakhong , Manipur

Tender Brief : Tender For Repair,Repainting Of Steel Furniture And Repair, Re-Canning Polishing Of Wooden Furniture At Unit Lines, Married Accn And Furniture Under Ge 869 Ews At Leimakhong Mil Stn.

Document Fees
₹ 500 /-

EMD
₹ 98000.0 /-

Tender Value
₹ 49 Lakhs /-

Submission Date
07-04-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Schedule 'A'
2	Removing the existing unserviceable tops from the following tables and supply and fix new top of 18/19 mm thick commercial block board with 1 mm thick plastic laminated sheet fixed on top 4 mm thick teak wood edging shall be provided al-round the top.all as shown on drawing and specified . Table 3'x 2' with drawers FD-224/383
3	Table 3'x 2' without drawers FD-223/384
4	Table Centre FD-235/274
5	Table peg FD-277
6	Teapoy FD-278
7	Table Computer FD/E6/MAP/03
8	Table dining 4 Persons MAP FD/MAP-II/03
9	Table dining 6 pers MAP FD/E6/MAP/01, FD-239/273
10	Table dining 8 Persons FD-273
11	Table Writing FD-275
12	Table office officer wooden WFD-32
13	Table office clk wooden DB-4120
14	Table Office clerk steel with drawers FD-1004
15	Table office Officer steel FD-1003
16	Table office senior officer steel FD-1002
17	Teapoy Verandah steel/ Map FD-255, FD/E6/MAP/03
18	Table 900 mm x 600mm with drawer steel FD-1008
19	Table 900 mm x 600mm without drawer steel FD-1007
20	Table 900 mm x 900 mm steel FD-1009
21	Removing the existing unserviceable front and back long rail from the following tables and supply and fix new front and back long rail of teak wood/Hollock/Bonsum size, shape & design as shown on drg All new surfaces shall be two coat of french polish with high gloss finish. Table 3'x 2' with drawers FD- 224/383
22	Table 3'x 2' without drawers FD- 223/284
23	Table Centre FD- 235/274
24	Table peg FD- 277
25	Teapoy FD- 278
26	Table dining 4 pers MAP FD/MAP-II/03
27	Table dining 6 Persons FD- 239/273 , FD/MAP-II/03
28	Table Writing FD- 275
29	Ditto all as per item No 20.00 here-in- above but short side rail.Table Centre -FD 235/274
30	Table peg -FD277
31	Teapoy -FD 278
32	Table dining 6 Persons -FD 239/273, FD/MAP-II/03
33	Table dining 8 Persons -FD 273
34	Table Writing -FD 275
35	Ditto all as per item No 20.00 here-in- above but Legs. Table 3'x 2' with drawer - FD 224/383
36	Table 3'x 2' without drawers - FD 223/384
37	Table Centre - FD 235/274
38	Table peg - FD 277
39	Teapoy - FD 278
40	Table dining 6 Persons - FD 239/273, FD/MAP-II/03
41	Table dining 8 Persons - FD 273
42	Table Writing - FD 275
43	Table dining 4 Persons - FD/MAP-II/03
44	Table office clk wooden - DB4120
45	Removing the existing unserviceable knob from drawers of the following tables and supply and fixing new decorative knob to the drwers. size, shape & design as shown on drg or as directed by Engr in Charge. Table 3'x 2' with & without drawers - FD 223/384/224/384
46	Table dressing Gents & Ladies - FD 223/384
47	Table Writing FD- 275
48	Table office officer wooden WFD-32
49	Table office clk wooden DB-4120
50	Removing the existing unserviceable wooden drawers from the following tables and supply and fixing new drwers as shown on drgs and specified and as directed by Engr in Charge. Table 3'x 2' with & without drawers - FD 223/384/224/384
51	Table dressing Gents & Ladies - FD 223/384
52	Table Writing FD- 275
53	Table office officer wooden WFD-32
54	Table office clk wooden DB-4120
55	Removing the existing unserviceable front leg from following chair and S&F new teak wood front leg complete all as directed and shown on drg Chair dining FD - 279
56	All as per Ser No 54.00 but Chair dining MAP - FD/MAPII/05
57	All as per Ser No 54.00 but Chair Dining Officers (MAP) - FD/MAPII/04
58	All as per Ser No 54.00 but Chair dining long Back - FD357
59	All as per Ser No 54.00 but Chair Easy FD 229
60	Removing the existing unserviceable rear leg from following chair and S&F new teak wood rear leg complete all as directed and shown on drg Chair dining FD -279
61	All as per Ser No 59.00 but Chair dining MAP - FD /MAPII/05
62	All as per Ser No 59.00 but Chair Dining Officers (MAP) - FD/MAPII/04
63	All as per Ser No 59.00 but Chair dining long Back - FD- 357
64	All as per Ser No 59.00 but Chair Easy FD - FD- 229
65	Removing the existing unserviceable front rails from following chair and S&F new teak wood front rails complete all as directed and shown on drg Chair dining MAP - FD/MAP II/05
66	All as per Ser No 64.00 but Chair Dining Officers (MAP) - FD/MAP II/04
67	All as per Ser No 64.00 but Chair dining long Back - FD357
68	Removing the existing unserviceable side rails from following chair and S&F new teak wood side rails complete all as directed and shown on drgChair dining MAP - FD/MAPII/05
69	All as per Ser No 67.00 but Chair Dining Officers (MAP) - FD/MAPII/04
70	All as per Ser No 67.00 but Chair dining long Back - FD357
71	Removing the existing unserviceable stiffiner from following chair and S&F new teak wood stiffiner complete all as directed and shown on drgChair dining MAP - FD/MAP/II/05
72	All as per Ser No 70.00 but Chair Dining Officers (MAP)-FD/MAP/II/04
73	All as per Ser No 70.00 but Chair dining long Back FD-357
74	All as per Ser No 70.00 but Chair Easy FD-229
75	SOFA SETs (FD-281) & FD/MAP-II/02, Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 32 density 530 mm x 500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.750/Mtr
76	SOFA SETs (FD-281) & FD/MAP-II/02, Removing the existing unserviceable leg from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum leg all as shown on drg and directed by Engr- in -Charge.
77	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable Arm rest from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum Arm Rest all as shown on drawing and specified .
78	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable side rail from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum side rail all as shown on drawing and specified .
79	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable bearer from Sofa FD-281 long pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .
80	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable bearer from Sofa FD-281 single pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .
81	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable battens from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum battens all as shown on drawing and specified .
82	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable front rail from Sofa FD-281 long pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .
83	SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable front rail from Sofa single pieces FD-281 and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .
84	(Table dressing with Mirror Gents, FD- 230)Removing the existing unserviceable mirror and S & F new mirror of size 380mm x 760mm and 5 mm thick make modiguard /swastic/saint gobain with back and frame all as specified and shown on drgs including with teak wood support approved quality and shown on drags including with teak wood support.
85	(Table dressing with Mirror Gents, FD- 230/FD/E6) Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs
86	(Table dressing with Mirror Ladies, FD-251) Removing the existing broken glass shutters and S&F new Glass shutters all as shown on drg (Each glass shutter shall be measured as single unit)
87	(Table dressing with Mirror Ladies, FD-251) Removing the existing unserviceable Aluminium channel and S & F new Aluminium Channel all as shown on drgs
88	(Table dressing with Mirror Ladies, FD-251) Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs
89	(Table dressing with Mirror Ladies, FD-251) Removing the existing unserviceable mirror and S&F new mirror 5 mm thick of make modiguard/Saint Gobain with complete frame and back all as shown on drgs .
90	(Table dressing with Mirror Ladies, FD-251) Removing the existing unserviceable 12mm ply wood from back and S&F new back of table dressing ladies made out of 12 mm thick plywood commercial quality all as shown on drgs and specified.
91	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) Removing the existing unserviceable mirror and S&F new mirror 5 mm thick of make modiguard/Saint Gobain with complete frame and back all as shown on drgs .
92	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv portion of MDF board from two (Left & Right) sides units of Table dressing ladies with mirror & stool and S & F new 18mm thick prelaminated MDF board and matching with existing colour as shown on drgs and specified and directed by Engr-in-Charge. (Each side shall be measured as single unit)
93	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv portion of MDF board from front and top side of Table dressing ladies with mirror & stool and S & F new 18mm thick prelaminated MDF board and matching with existing colour as shown on drgs and specified and directed by Engr-in-Charge. (Each side shall be measured as single unit)
94	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv drawers from Table Bed Side Steel and Supply and Fixing new 12mm thick commercial plywood irrespective of what is shown on drg and specified and directed by Engr-in-Charge.
95	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv 6mm ply portion from back side of Table dressing ladies with mirror & stool and S & F new 6mm commercial plywood BWR grade duly screwed to frame as shown on drgs and specified and directed by Engr-in-Charge
96	Table Dressing Ladies with Mirror & Stool :- Taking out old unsv 12mm ply portion from Table dressing ladies with mirror & stool and S & F new 12mm thick commercial plywood irrespective of what is shown on drg and specified and directed by Engr-in-Charge.
97	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv Handles from drawers of Table Bed Side Steel and Supply and Fixing new 100mm long CP handles and specified, directed by Engr-in-Charge.
98	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :-Taking out old unsv seat from Table dressing ladies with mirror & stool and supply and fixing new 60mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. Make of foam shall be Kurlon/Sleep well.
99	Table Dressing Ladies with Mirror & Stool(FD/MAP-II/07) :- Taking out old unsv portion of prelaminated PVC/sunmica/veneer sheet from Table dressing ladies with mirror & stool and Supply and Fixing of new 1mm prelaminated PVC/sunmica/veneer sheet suitable/matching with existing colour as shown on drgs and specified and directed by Engr-in-Charge.
100	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv MS Square Pipe from Table Bed Side Steel and Supply and Fix with welding of new 18mm MS Square Pipe 18 guage duly black powder coated as shown on drgs and specified and directed by Engr-in-Charge.(Each side MS Pipe shall be measured as single unit)
101	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv portion of MDF board two (Left & Right) sides of Table Bed Side Steel and Supply and Fixing new 18mm thick prelaminated MDF board as shown on drgs and specified and directed by Engr-in-Charge.(Each side shall be measured as single unit)
102	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv portion of MDF board two side of top and front from Table Bed Side Steel and Supply and Fixing new 18mm thick prelaminated MDF board as shown on drgs and specified and directed by Engr-in-Charge.(Each side MS Pipe shall be measured as single unit)
103	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv 6mm ply portion from back side of Table Bed Side Steel and Supply and Fixing new 6mm commercial plywood BWR grade duly screwed to frame as shown on drgs and specified and directed by Engr-in-Charge
104	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv drawers from Table Bed Side Steel and Supply and Fixing new 12mm thick commercial plywood irrespective of what is shown on drg and specified and directed by Engr-in-Charge.
105	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Taking out old unsv handles from drawers of Table Bed Side Steel and Supply and Fixing new 100mm long CP handles and specified, directed by Engr-in-Charge.
106	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Removing the UNSV rubber shoes and S&F new rubber/PVC shoes provided to the bottom of legs
107	Table Bed Side Steel MAP (FD/E6/MAP/15(R)) : Removing the UNSV Sliding/telescopic Channel 12\\" from the drawers and S&F new heavy duty sliding/te;escopic channel 12\\" provided to the front side of drawer to Table bed side steel as shown on drg and directed by Engr in Charge.
108	Table Computer(FD/E6/MAP/03) : Taking out old unsv portion of MDF board of key pad shelf from Table Bed Side Steel and Supply and Fixing new 18mm thick prelaminated MDF board to the table computer as shown on drgs and specified and directed by Engr-in-Charge.
109	Table Computer(FD/E6/MAP/03) : Taking out old unsv drawers from Table Computer and Supply and Fixing new 18mm thick commercial plywood irrespective of what is shown on drg and specified and directed by Engr-in-Charge.
110	Table Computer(FD/E6/MAP/03) : Taking out old unsv handles from drawers of Table computer and Supply and Fixing new 100mm long CP handles and specified, directed by Engr-in-Charge.
111	Table Computer(FD/E6/MAP/03) : Removing the UNSV Sliding or telescopic Channel 12\\" from the drawers and Key board shelf and S&F new heavy duty sliding or telescopic channel 12\\" provided to the drawer and key board shelf as shown on drg and directed by Engr in Charge.
112	Table Computer(FD/E6/MAP/03) : Removing the UNSV rubber shoes or nylon buffers and S&F new rubber shoes or nylon buffers provided to the bottom of legs as shown on drg and directed by Engr in charge.
113	Trolly for TV (FD/E6/MAP/04) : Taking out old unsv portion of prelaminated PVC/sunmica/veneer sheet from Trolly for TV and Supply and Fixing of new 1mm prelaminated PVC/sunmica/veneer sheet matching with existing colour as shown on drgs and specified and directed by Engr-in-Charge.
114	Trolly for TV (FD/E6/MAP/04) : Removing the existing broken transprent glass and S&F new mirror 5 mm thick of with suitable SS Clamps to the Trolly for TV. Make modiguard/Saint Gobain with complete frame and back all as shown on drgs .
115	Side Board (FD-241) :- Taking out old unsv portion of prelaminated PVC/sunmica/veneer sheet from Side Board and Supply and Fixing of new 1mm prelaminated PVC/sunmica/veneer sheet matching with existing colour as shown on drgs and specified and directed by Engr-in-Charge.
116	Side Board (FD-241) :- Taking out old unsv drawers from Side Board and Supply and Fixing new 18mm thick commercial plywood irrespective of what is shown on drg and specified and directed by Engr-in-Charge.
117	Side Board (FD-241) :- Taking out old unsv Handles from drawers of Side Board and Supply and Fixing new 100mm long CP handles and specified, directed by Engr-in-Charge.
118	Hat Stand with Mirror Small/Large (FD-2362,223,233) :- Removing the existing unserviceable mirror from Hat stand and S & F new mirror of size 440mm high and 300mm wide with 5.5 mm thickness to the Hat stand with mirror as shown on drgs and as directed by Engr in Charge. Make modiguard /swastic/saint gobain
119	Hat Stand with Mirror Small/Large (FD-2362,223,233) :- Removing the existing unserviceable Alluminium/Brass peg and S & F new Brass peg to the Hat Stand as shown on drgs and specified
120	Hat Stand with Mirror Small/Large (FD-2362,223,233) :- Removing existing unserviceable Hanging Hook from Hat stand and S&F new hanging alluminium/brass Hook to Hat stand with mirror all as shown on drgs and as directed by Engr in Charge.
121	Chair Dining PVC MAP (FD/MAP-II/05) :- Removing the unserviceable PVC seat from Chair Dining (MAP) and supply and fix new suprior quality PVC seat. All as shown on drg and as directed by Engr-in-Charge..
122	Chair Dining PVC MAP (FD/MAP-II/05) :- Removing the unsv PVC shoe from chair dining PVC MAP/Fd and supply and fixing new PVC shoe superior quality chair dining PVC MAP/Fd. All as shown on drg and directed by Engr-in-charge..
123	Chair Dining Long Back (FD-357) :- Taking out old unsv seat from chair dining long back and supply and fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. MAke of foam shall be Kurlon/Sleep well.
124	Chair Dining Long Back (FD-357) :- Taking out old unsv back rest from chair dining long back and supply and fixing new 50mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of back rest with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. Make of foam shall be Kurlon/Sleep well.
125	Chair Dining Long Back (FD-357) :- Removing the unsv PVC shoe from chair dining long back and supply and fixing new PVC shoe superior quality chair dining long back. All as shown on drg and directed by Engr-in-charge.
126	Chair Dining Officer MAP (FD/MAP-II/04) :- Taking out old unsv seat from chair dining offr MAP and supply and fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. MAke of foam shall be Kurlon/Sleep well.
127	Chair Dining Officer MAP (FD/MAP-II/04) :- Removing the unsv PVC shoe from chair dining officer MAP and supply and fixing new PVC shoe superior quality chair dining offr MAP. All as shown on drg and directed by Engr-in-charge.
128	Chair Easy Cushioned (FD-358), Taking out old unsv seat from chair easy cushioned and Supply and Fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlons/Sleep well.
129	Chair Easy Cushioned (FD-358), Taking out old unsv back rest from chair easy cushioned and supply and fixing new 50mm thick foam cushion of 32 density shall be fixed on 12mm thick BWR plywood of back rest. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlons/Sleep well.
130	Chair Easy Cushioned (FD-358), Taking out old unsv arms from chair easy cushioned and S&F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.
131	Chair Easy Cushioned (FD-358), S&F new rubber/PVC shoes provided to the bottom of legs complete all as specified and as directed by Engr-in-Charge
132	Preparing the wood surface by scraping and filling bore holes with putty and rubbing by sand paper/Abbrassive cloth throughly smooth and clean off and applying one coat of french polish of the required finishing of Table 3'x2' with Drawer & without drawer FD-248
133	All as per item No. 131.00 but Table Dressing Gents FD- 251
134	All as per item No. 131.00 Table Dressing Ladies FD- 246
135	All as per item No. 131.00 Bed plywood top FD- 244
136	All as per item No. 131.00 Chair dining FD- 279
137	All as per item No. 131.00 Chair dining JCO/OR PVC (Map) FD/MAP-II/04, HFD
138	All as per item No. 131.00 Chair Easy FD - 250
139	All as per item No. 131.00 Chair writing FD- 233
140	All as per item No. 131.00 Chair dining long Back FD- 357
141	All as per item No. 131.00 Chair dining officer (MAP) FD/MAP-II/ 04
142	All as per item No. 131.00 Peg table, FD- 281
143	All as per item No. 131.00 Sofa Set 5 Seater (MAP), FD/ MAP-II/02/ FD-252
144	All as per item No. 131.00 Sofa Set single Seater, FD- 281
145	All as per item No. 131.00 Table Centre, FD- 239
146	All as per item No. 131.00 Table dining 4 persons, FD/ MAP-II/03
147	All as per item No. 131.00 Table dining 6 persons (MAP), FD/MAP-II/03, FD-239
148	All as per item No. 131.00 Table dining 8 persons, FD- 273
149	All as per item No. 131.00 Table office clk wooden, DB- 4120
150	All as per item No. 131.00 Table office officer wooden, WDF- 32
151	All as per item No. 131.00 Table writing , FD- 232
152	All as per item No. 131.00 Table Bed Side Fd , FD- 276
153	All as per item No. 131.00 Teapoy, FD- 276
154	All as per item No. 131.00 Hat stand with mirror, FD- 362, 223, 233
155	All as per item No. 131.00 Chair Easy Cushioned, FD- 357
156	All as per item No. 131.00 Stool Dressing CB , FD-27, 252, 282
157	All as per item No. 131.00 Bin Sloid Linen Multipurpose , FD/E6/MAP/09
158	All as per item No. 131.00 Notice Board 1830mmx1220mm & 2440mmx1220mm , FD-99 & FD-99(M)
159	All as per item No. 131.00 Notice Board 900mmx600mm , FD-1042
160	All as per item No. 131.00 Record for Record 6'x2'x6' , DB-3593
161	Removing the existing unserviceable cane from Chairs and recanning of chairs of all sorts i.e. chair writing, chair easy and Stool dressing etc, with best quality of plastic cane Make -Maharashtra/ Swastik Industries of approved make. The plastic cane should be 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern as specified and directed by Engr-in-charge Chair writing FD , FD-280
162	All as per item No. 160.00 Chair Dining FD , FD-230, FD-279
163	All as per item No. 160.00 Chair Easy FD , FD-229
164	All as per item No. 160.00 Stool Dressing CB , FD-27, FD-252, FD-282
165	All as per item No. 160.00 Bin Sloid Linen Multipurpose , FD/E6/MAP/09
166	Chair Verandah (FD-19 (M)), Removing the existing unserviceable cane from Chair Verandah and recanning of chair verandah with best quality of Make Maharashtra/Swastik Industries of approved plastic newar 25/50mm wide as per trade pattern all as specified and directed by Engr-in-Charge
167	Chair Verandah (FD-19 (M)), S&F new hard rubber shoes of appropriate size suitable to chair verandah all as specified and shown on drawing and as directed by Engr in Charge
168	Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Seat from chiar writing steel MAP and S&F of new Seat (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) to Chair writing steel MAP, all as shown on drg and as directed by Engr-in-Charge.
169	Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Back from chiar writing steel MAP and S&F of new Seat (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back foam shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) to Chair writing steel MAP, all as shown on drg and as directed by Engr-in-Charge.
170	Chair Writing Steel MAP (FD/E6/MAP/12), Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge
171	Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Arms from Chair writing steel MAP and S&F of new Arms all as shown on drg and as directed by Engr-in-Charge.
172	Chair CBA Steel With Arms (FD-75 (M) HFD-2045), Removing the existing unserviceable Seat from chiar CBA Steel with Arms and S&F of new Seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam of 60mm with PVC lipping all around to them in all respect of Make : Godrej or equivalent to chair CBA steel with Arms. rest all as shown on drgs and specified and as directed by Engr-in-Charge.
173	Chair CBA Steel With Arms (FD-75 (M) HFD-2045), Removing the existing unserviceable Back from chiar CBA Steel with Arms and S&F of new Back (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam of 60mm with PVC lipping all around to them in all respect of Make : Godrej or equivalent to chair CBA steel with Arms. rest all as shown on drgs and specified and as directed by Engr-in-Charge.
174	Chair CBA Steel With Arms (FD-75 (M) HFD-2045), Removing the existing unserviceable Arms from chair CBA Steel with Arms and S&F of new Arms all as shown on drg and as directed by Engr-in-Charge.
175	Chair CBA Steel Without Arms (FD-75 (M) HFD-2044), Removing the existing unserviceable Seat from chiar CBA Steel without Arms and S&F of new Seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam of 60mm with PVC lipping all around to them in all respect of Make : Godrej or equivalent to chair CBA steel with Arms. rest all as shown on drgs and specified and as directed by Engr-in-Charge.
176	Chair CBA Steel Without Arms (FD-75 (M) HFD-2044), Removing the existing unserviceable Back from chiar CBA Steel without Arms and S&F of new Back (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam of 60mm with PVC lipping all around to them in all respect of Make : Godrej or equivalent to chair CBA steel with Arms. rest all as shown on drgs and specified and as directed by Engr-in-Charge.
177	Chair School With Hand Board (FD/E6/MAP/05) Removing the existing unserviceable hand board and S&F of new hand board of Chair School with hand board as shown on drgs and specified by Engr-in-charge.
178	Chair School With Hand Board (FD/E6/MAP/05) Removing the existing unserviceable PVC Back & Seat and Supply & fixing of new PVC Back & Seat of blow plast or equivalent to Chair School with hand board as shown on drgs and specified and as directed by Engr-in-charge.
179	Locker Steel (FD-1029) Removing the existing unserviceable/damage/ broken legs for lockers steel and S&F with a new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and all as specified and shown on drgs in addition to provide rubber pad in 3mm thick to be provided for legs.
180	Locker Steel (FD-1029) Removing the existing unserviceable/damaged shelves for locker steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker/clips and all as specified and shown on drg.
181	Locker Steel (FD-1029) Removinf the existing unserviceable/damaged Haps and staple for locker steel and S&F with a new Haps and staple all as approved by Garrison Engineer.
182	ALMIRAH LARGE (FD-1032,) Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel
183	ALMIRAH MEDIUM/ SMALL STEEL (FD-1031,) Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah medium/ Small steel
184	ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable locks and S&F locks of appropriate size 6 levers with duplicate keys chromium plated Make Godrej (product No 3936) or equivalent as suitable in almirah with suitable fixing arrangement all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate cover to key hole back side cover locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.
185	ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable handle and S&F new chromium plated handle 125mm long to almirah large/medium/small steel all as specified/directed and shown on drg.
186	ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable/damaged/ broken legs for almirah large and S&F with a new legs made out of 18 G sheet with applying one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.
187	ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable/damage/broken legs for almirah medium and S&F with a new legs made out of 18 G sheet with applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.
188	Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Seat from Chair Computer Revolving and S&F of new seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethene foam. and PVC lipping all around to them in all respect overall size 510x470x60mm. Make : Godrej or equivalent to Chair computer revolving all as shown on drg and as directed by Engr-in-Charge.
189	Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Back from Chair Computer Revolving and S&F of new seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethene foam. The back from shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect overall size 510x470x60mm. Make : Godrej or equivalent to Chair computer revolving all as shown on drg and as directed by Engr-in-Charge.
190	Chair Computer Revolving (FD/E6/MAP/01) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge
191	Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Arms from Chair computer revolving and S&F of new Arms to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.
192	Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable fibre stem base from Chair computer revolving and S&F of new fibre stem base to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.
193	Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Bottom gas lift hydraulic from Chair computer revolving and S&F of new Bottom gas lift hydraulic to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.
194	Table Office Officer Steel (FD-1002) Removing existing unserviceable locks and supply and fixing new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).
195	Table Office Officer Steel (FD-1002) Removing of existing unserviceable drawer from table Office Officer steel and supply and fixing new drawer made of 1mm thick CRC sheet all as per drg and specified by Engr-in-charge. The new drawer should be painted with two coat of synthetic enamel paint over a coat of red oxide and colour approved by GE.
196	Table Office Clk Steel with Drawers (FD-1004, FD-307) Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).
197	Table Office Clk Steel with Drawers (FD-1004, FD-307) Removing of existing unserviceable drawer from table Office Clk steel and supply and fixing new drawer made of 1mm thick CRC sheet all as per drg and specified by Engr-in-charge. The new drawer should be painted with two coat of synthetic enamel paint over a coat of red oxide and colour approved by GE.
198	Form w/o Back Steel (FD-77(M) & FD -1027) Preparing the old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of form w/o back steel as specified and rest as directed by Engr-in-Charge.
199	Form w/o Back Steel (FD-77(M) & FD -1027) Removing the existing unserviceable Seat from form without back steel and supply & fixing of new wooden made of teakwood in one piece of size 1525mm long 255mm wide and 25mm thick wooden planks bolted to frame with 3mm dia GI nut bolt and washer to form without back steel including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.
200	Form with Back Steel 6'.0\\" (FD-77(M), FD -1027 & HFD-2052) Preparing the old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of form with back steel 6'.0\\" and rest as specified and as directed by Engr-in-Charge.
201	Form with Back Steel 6'.0\\" (FD-77(M), FD -1027 & HFD-2052) Removing the existing unserviceable Seat from form with back steel 6'.0\\" and supply & fixing of new wooden made of teakwood in one piece of size 1525mm long 255mm wide and 25mm thick wooden planks bolted to frame with 3mm dia GI nut bolt and washer to form with back steel 6'.0\\" including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.
202	Form with Back Steel 6'.0\\" (FD-77(M), FD -1027 & HFD-2052) Removing the existing unserviceable Back from form with back steel 6'.0\\" and supply & fixing of new back of wooden planks of suitable size to form with back steel 6'.0\\" including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.
203	M&L for cleaning/preparing the existing surfaces ie. de-rusting, filling putty, denting of steel surfaces and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish of Chair school with hand board, FD/E6/MAP/05
204	All as per item No. 202.00 Chair writing steel MAP , FD/E6/MAP/12
205	All as per item No. 202.00 Chair CBA Steel (MAP) , HFD-2044, 2045
206	All as per item No. 202.00 Chair Verandah Fd/MAP , FD-256, FD/E6/MAP/II
207	All as per item No. 202.00 Ladder For Lift , FD-238
208	All as per item No. 202.00 Rack Side Steel With 3/4 Spaces , FD-1023, HFD-2039
209	All as per item No. 202.00 Rack Shoes Steel MAP , FD/E6/MAP/01
210	All as per item No. 202.00 Rack Side Steel 6 Tier 915X610X1905mm , FD-1038, 129(M), HFD-2039
211	All as per item No. 202.00 Rack Closed type Steel with 6 shelves , FD-1038, 129(M), HFD-2039
212	All as per item No. 202.00 Stool Steel 315x315x610mm , FD-81(M)
213	All as per item No. 202.00 Table 3'x2' Steel With Drawers , FD-1008
214	All as per item No. 202.00 Table 3'x2' Steel Without Drawers , FD-1007
215	All as per item No. 202.00 Table 900x900x760mm Steel (3'x3') , FD-1009
216	All as per item No. 202.00 Trestle Store Room Steel , FD-1043
217	All as per item No. 202.00 Table Office Clerk Steel With Drawers, FD-1004, HFD-251
218	All as per item No. 202.00 Table Office Officer Steel , FD-1003, HFD-2050
219	All as per item No. 202.00 Table Senior Officer Steel 1800x1200x760mm , FD-1002
220	All as per item No. 202.00 Table Dining ORs with Alluminium Top , FD-165(M)
221	All as per item No. 202.00 Table Bed Side Steel MAP , FD/E6/MAP/15( R)
222	All as per item No. 202.00 Teapoy Verandah Steel/MAP, FD-255, FD/E6/MAP/17
223	All as per item No. 202.00 Table Computer, FD/E6/MAP/03
224	All as per item No. 202.00 Locker Bedside Steel , FD-1029
225	All as per item No. 202.00 Almirah Large Steel , FD-67, FD-1031, HFD-2055, FD-1033, HFD-2060
226	All as per item No. 202.00 Almirah Med/Small Steel , FD-10321, FD-243, HFD-2056, FD-1033
227	All as per item No. 202.00 Book Case Steel Large Glazed , FD-1028
228	All as per item No. 202.00 Bed Hard Steel Offrs , FD/E6/MAP/08
229	All as per item No. 202.00 Charpoy MS Square , FD/MAP-II/01
230	All as per item No. 202.00 MNF Set , FD-145
231	Bed Hard steel Offrs (FD/E6/MAP/08) Removing of Existing UNSV plywwod and Supply & Fixing of new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
232	Bed Hard steel Offrs (FD/E6/MAP/08) Removing the existing unsv particle board of head rest from Bed hard steel and S&F of new prelaminated particle board of 18/19mm to head rest for bed hard steel as per drg and directed by Engr-in-Charge.
233	Bed Hard steel Offrs (FD/E6/MAP/08) Removing the existing unsv particle board of foot rest from Bed hard steel and S&F of new prelaminated particle board of 18/19mm to foot rest for bed hard steel as per drg and directed by Engr-in-Charge.
234	Bed Hard steel Offrs (FD/E6/MAP/08) Supply & Fixing new hard rubber shoes of appropriate size suitable to bed hard steel ass as specified and shown on drawing and as directed by Eng-in- charge
235	Charpoy MS with Plywood Top (FD/MAP-II/01) Removing the existing plywood from Charpoy MS and Supply &Fixing of new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
236	Charpoy MS with Plywood Top (FD/MAP-II/01) Supply & Fixing new hard rubber shoes of appropriate size suitable to bed hard steel ass as specified and shown on drawing and as directed by Eng-in- charge
237	Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv plywood from Bed hard wooden plywood top and supply & fixing new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner fixed with MS nut & bolt 6mm dia 75 mm length with washer to bed hard wooden with plywood top and all as directed by the Eng-in- charge.
238	Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv head board including legs from bed hard wooden with plywood top and S&F of new head board including leg to bed hard wooden with plywood top and all as directed by Engr-in-Charge.
239	Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv foot board including legs from bed hard wooden with plywood top and S&F of new foot board including leg to bed hard wooden with plywood top and all as directed by Engr-in-Charge.
240	Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv long rail from bed hard wooden with plywood top and S&F of new long rail to bed hard wooden with plywood top as per drg and all as directed by Engr-in-Charge.
241	Charpoy GI Pipe Plywood top (FD-220) Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner fixed with MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
242	Charpoy GI Pipe Plywood top (FD-220) Removing the unserviceable/broken check nuts from GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)
243	Charpoy GI Pipe Plywood top (FD-220) Removing the unserviceable broken 3 way GI elbow from GI charpoy & S&F 32 MM dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each Elbow GI shall be measured as single unit)
244	Charpoy GI Pipe Plywood top (FD-220) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each base plate will be measured as single unit).
245	Charpoy GI Pipe Plywood top (FD-220) Clamp Welding -supply and welding flat Iron 25 mm x 33 mm mild steel clamps made to shape as shonw in drg shall be welded in GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each clamp will be measured as single unit). Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Manipur Tenders

Services Tenders

Painting Work Tenders

Painting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair,Repainting Of Steel Furniture And Repair, Re-Canning Polishing Of Wooden Furniture At Unit Lines, Married Accn And Furniture Under Ge 869 Ews At Leimakhong Mil Stn., Leimakhong-Manipur

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair,Repainting Of Steel Furniture And Repair, Re-Canning Polishing Of Wooden Furniture At Unit Lines, Married Accn And Furniture Under Ge 869 Ews At Leimakhong Mil Stn., Leimakhong-Manipur

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us