|
| 1 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 2 | Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.a) Upto 1.50m lift Normal Rateb) 1.50m to 3.00m lift, Add 10%c) 3.00m to 4.50m lift, Add 20%d) 4.50m to 6.0m lift, Add 30% |
| 3 | Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means |
| 4 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 5 | Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 6 | Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 7 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Stee centering formwork, laying / pumping cover blocks, compaction and curing rough ening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete ,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying in situ / ready mix M-30 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5..00 m in followinh manners b) Height upto 5 M. (With Batch Mix Plant) With fully automatic micro processor based PLC with SCADA enable with fine agreegates of required specifications ( VSI sand finely washed etc) i) Height up to 5 m, normal rate. |
| 9 | Providing and laying in situ / ready mix controlled M-20 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 10 | Providing tar paper bearing including laying in proper position etc. complete. |
| 11 | Providing and layingin situ/ ready mix M-25 controlled cement concrete of trap/granite/ quartzite/ gneissmetal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro process or based PLC with SCADA enabled concrete batch mix plant / panmixer and fine agreegates of required specifications ( Natural sand/ VSI sand finely washed etc ) |
| 12 | Providing and laying in situ/ ready mix M 20 CC of trap /granite/ quartzite/ gneiss metal for wearing course 8 cm thick including compacting,finishing,curingandfillinginjoints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 13 | Providing,cutting,bending,hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 14 | Providing and laying in situ / ready mix M-15 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 15 | Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete. |
| 16 | Providing 100 mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. |
| 17 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 18 | Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 19 | Providing trap /granite /quartzite /gneiss rubble filling over haunches and arches including hand packing etc. complete. |
| 20 | Providing and fixing Road junction / Information sign board of size 0.90 m x0.60 m. prepared on16 gaug eM.S. sheet with angle iron frame of size 35 x 35 x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green / white back ground and back side gray stovee namelled,bonded with red retro reflective sheet Engineering grade, border / letters /numeral / arrows, coated with non pealable crystal clear protective coat retaining 100%reflection including twoangle ironpost of size 5 x 50 x 5 mm of 3.65 m long in flated atbottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I.bolts and nuts of size10 mm dia.and 20 mm longsheet and angle ironpost inonepiecewithout joints includingall taxes, conveying,fixinging round with cement concrete 1:4:8 block of 60 cm x 60cm x75cm size as directed by Engineer-in-chargeetc.complete.Mild Steel Board with Engineering Grade. |
| 21 | Test Reports |
| 22 | Royalty Please Enable Macros to View BoQ information |
