|
| 1 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy |
| 2 | Providing and applying epoxy mortar over vide cracks of Arch/Rcc beams/deck slabs by epoxy grouting and injection process including providing and inserting nipples approved fixing compound after drilling holes for grouting as per technical specification s including subsequent cutting/removal and sealing of holes of nipples after completion of grouting with epoxy making 'V' grooves and applying apoxy mortar over the wide cracks as per MoRT&H specifications. The cost includes removal of defective concrete cleaning of surface thoroughly applying of material as per specification, labour, T&P scaffolding arrangements required for proper completion of work. Complete as per technical specifications and direction of engineer-in charge. |
| 3 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Finishing with Deluxe Multi surfacepaintsystem for interiors and over abase of white cement base putty of everage thickness one mm. |
| 4 | ( Repairing of Parapet Railing) Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work. ( S.I. No. 503 ) |
| 5 | Painting 2 coat over priming coat (including cost of priming coat) on steel and other metal surfaces upto 10 cm width or girth or small articles not exceeding 0.10 Sq.M in area white superior synthetic enamel such as Luxol 3, Higloss apcolite superlac, Deluxe specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping including cost of all materials labour tools and plants etc required for proper completion of the work(641+642) Railing |
| 6 | Racking out joints of brick work in cement or lime mortar to a depth of 1 cm (3/8\\") including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 m. (200)( S.I. No.707) |
| 7 | 12 mm thick plaster with cement mortar in proportion of 1:3 cement andcoarse sand over brick work minimum thickness not to be less than 10 mm thick including supply of all materials, labour and T & P etc required for proper completion of the work. (S.I. No.583) |
| 8 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 9 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification |
| 10 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications |
| 11 | Type - A, 'W\\" : Metal Be4m Crgsh BarrierProviding and erecting a \\"\’7’ melal beam crash carrier comp^•›°s °! ^ +m Irick corrugated shee melal beam rail. ?0 cm above road 'ground levei, fixed on ISf•1C ser es channel vertical post 150 x 75 x5 mm spaced 2 m centre io cen\re. 1 8 m high 1 I m below ground/road level, a I steel parts and fitments lo be galvanised by hoi d p process, all f.ttings to conform to IS: \ 367 and IS 136a, metal bean rail to be fixed on lhe vertical post with a spacer of channel section 150 x 75 x 5 mm 330 mm long compleie as per clause 81C |
| 12 | Road DeltnatorOeiineator Supply 6 Fixing of M S Dellnaalor made of Mild steel with pure polyester powder coating wllhme minimum thickness of powder coating of not less then 40 micron for protecllon against corrosion The surface should be concerted so Ihal there 6hould not be any exposed surface without powde‹ coating. Alternatively, these metal gulda poles can be concealed with tf›smoplasdc body. The posts chaff have Ian allipeoldal or drcular deslgn wilfi txe height of the pole shall ba 800 to 000 mm above the ground wtth about 200 to 300 mm base wh\ch can be anchored onto the ground. Mild ateel Guide Poles sMII confomi to Type XI steeling speafications as per IRC:67 and ASTM D4868 wtdch would enswe to obtginl clear vislbllily of the road alignment dwtng night tlme. The Retro reflective sheeting shall be tostad for A certificate of havtng it›e sheeting teaed for coefficient of retro raneNlon. daytime colour aria luminance, shnnkage, flexibility, liner removal, adhesion. impect resiatanca, specuter gloca and Fungus realslance, 3 years outdoor weathering and ils having passed these iasts shah be obiamed mom International/Government Laboratory / lnstltute by the manufacturer of the sheeting and in cess Ihe certificele ie oolained from internatlonal uondi/lon, it should also be obtained from Indien condition within 3 yearc of launching of product by the m8nufecture in abroad. Alternatively, a ceniftcate conforming to ASTM Speciflcatton (04956-09) on erlifdel accelerated weatheñng requirements from a reputed laboratory ¥1 Indla can be accepted provisionally. In sun a situatlon, the Employer / Clienl, If so deslres could coek for a performance guarantee which woutd be released after receipt of ceniflcate meeting the requirement of hose years outdoor weathering of the sheeflng as per IRC 87.2012 & Proof of the eame Raport shall be uploaded which quotk\g tender. The rate shall xwude ell matenats, labour, T&P Iranspoftaton, installation and Incidentais all complete as per direction of the Engineer-In-Crierge. |
| 13 | RAFFIC SIGNS - HAZARD MARKER (Left and Right)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing as per MORTH specification Please Enable Macros to View BoQ information |
