|
| 1 | Maintenance of Earth Pits including supply of Sodium Bentonite, and measurement of Earth Pit Resistance as per the specification. (Refer Sec VI (MNC), Clause No.2). |
| 2 | Lifting of earth pit chamber up by 250mm aprox including earth excavation as per scope of work. |
| 3 | Removal, shifting and reinstallation of complete Earth pit inlcuding Plate Earth Electrode, RCC Chamber and RCC cover slab with in 500 meter. Reinstallation shall be completed and tested as per IS: 3043 and as per Drawing No. IGC/ESD/5060/1001/1 enclosed. (50 Kg. each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.2). Scope include Excavation and refilling. |
| 4 | Supply and replacing following earth pit chamber parts after removing and disposing of old/damaged part as per drawing No. IGC/ESD/5060/1008/1. |
| 5 | RCC Top cover alone |
| 6 | RCC ring Collar alone |
| 7 | Painting of Distribution Equipments with TWO Coat of Synthetic Enamel Paint including supply of paint and required consumables .(Refer Sec VI (MNC), Clause No.3). |
| 8 | Feeder Pillars - Type - A |
| 9 | Feeder Pillars - Type-B |
| 10 | Painting of Distribution Equipment |
| 11 | Cubicle switch boards having number of vertical sections upto 3 (Refer Sec VI (MNC), Clause No.3). |
| 12 | Cubicle switch boards having number of vertical sections above 3 and up to 6 (Refer Sec VI (MNC), Clause No.3). |
| 13 | Cubicle switch boards having number of vertical sections above 6 (Refer Sec VI (MNC), Clause No.3). |
| 14 | Supply and painting One coat on metallic surfaces of electrical equipment and other required surface at all levels using following paint (Asian or approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. (Refer Sec VI (MNC), Clause No.3). |
| 15 | Synthetic enamel Paint |
| 16 | Supply and Installation of following general electrical items as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 17 | water proof stickers of 250 x 50 mm size with messages as directed by Engineer in charge |
| 18 | Supply and replacement of the following Metalclad Plug and Socket (Refer Sec VI (MNC), Clause No.12). |
| 19 | 230V, 20A, 2P+E Metalclad Plug and socket |
| 20 | 415V, 20A, 3P+E, Metalclad Plug and socket |
| 21 | Maintenance of Electrical Panel on EOT cranes/Feeder Pillar (Refer Sec VI (MNC), Clause No.17.2). |
| 22 | Maintenance of Feeder pillar (Type-A) |
| 23 | Maintenance of Feeder Pillar (Type-B) |
| 24 | Maintenance of Power control centres/Motor Control centres/Bus duct /LT Distribution panels including switch fuse unit in panel excluding ACB maintenance. (Refer Sec VI (MNC), Clause No.17.2). |
| 25 | Cubicle switch boards having number of vertical sections up to 3 |
| 26 | Industrial LT panels |
| 27 | Cubicle switch boards having number of vertical sections more than 3 |
| 28 | TPN switch fuse units upto 200Amps |
| 29 | 415V, 3/4 Pole Air Circuit Breaker (ACB) current ranging from 630A to 4000A |
| 30 | Combination Switch fuse Units from 16A to 400A /Motor starters |
| 31 | Maintenance of Power and Lighting Distribution Boards located in various Buildings/Laboratories in IGCAR Complex (Refer Sec VI (MNC), Clause No.17.3). |
| 32 | 4/6 Way 16/32/63 Amps Fuse Distribution boards |
| 33 | 8/12 Way 16/32/63 Amps Fuse Distribution boards |
| 34 | 8/12 Way 16/32/63 Amps MCB Distribution Bards |
| 35 | Supply, open installation testing and commissioning of the following sizes of VTPN DBs on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1). |
| 36 | DB VTPN 8 Way (8 Plus 24) IP 43 - IK 09 Cat No:507727 or equivalent with 1No 125A,4P MCB incomer and 8Nos 32A,3P MCB |
| 37 | DB VTPN 4 Way (8 Plus 12) IP 43 - IK 09 Cat No:507725 or equivalent , with 1 No.125A FP MCB and 4Nos 63A 3P MCB. |
| 38 | Supply, open installation testing and commissioning of the following flexy DB with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires. (MS item will be measured separately). (Refer Sec VI, Clause No.15.2). |
| 39 | FLEXY DB 4 row of 14 modules IP 43 - IK 09 WITH METAL DOOR. Cat No:507707 or equivalent |
| 40 | Supply, open installation testing and commissioning of the following DB with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires. (MS item will be measured separately). (Refer Sec VI, Clause No.15.2). |
| 41 | DB SPN 8 Way (8) WITH METAL DOOR IP 43 - IK 09cat No:507611 or equivalent |
| 42 | DB SPN 12 Way (12) WITH METAL DOOR IP 43 - IK 09cat No:507612 or equivalent |
| 43 | Supply, open installation testing and commissioning of the following sizes of cable end termination box on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1.15). |
| 44 | Cable End Box for IP 43 SPN 8 Way DB cat No:507913 suitable for SPN 8 Way DB cat No:507611 |
| 45 | Cable End Box for IP 43 SPN 12 Way DB cat No:507915 suitable for SPN 12 Way DB cat No:507612 |
| 46 | Cable End Box for IP 43 all Flexy DB/VTPN MCB DB cat No:507936 or equivalent |
| 47 | Maintenance of service connection meter boards (including Energy meters and switch fuse units) (Refer Sec VI (MNC), Clause No.25). |
| 48 | Collecting of scrap items and shifting more than 1 km and up to a distance of 5 kms. Measurement will be done on volume basis (Refer Sec VI (MNC), Clause No.28). |
| 49 | Shifting of Electrical equipment/cable drums of various sizes including loading and unloading/Shifting of electrical/telephone items from IGCAR and hand over to service centres (upto chennai limit) or vice versa.(Refer Sec VI (MNC), Clause No.31). |
| 50 | Items weighing upto 10kg |
| 51 | Items weighing above 10kg and upto 50kg |
| 52 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 53 | 3/3.5/4core X Upto 25 sqmm |
| 54 | 3/3.5/4Core X above 25 & up to 120 sqmm |
| 55 | 3/3.5/4Core X above 120 & up to 240 sqmm |
| 56 | 3/3.5/4Core X above 240 & up to 400 sqmm |
| 57 | End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 58 | 4 Core X10sqmm |
| 59 | 4 Core X 16 Sqmm |
| 60 | 3.5/4 C x 35 sq.mm |
| 61 | 3.5/4C x 50/70 sq.mm |
| 62 | 3.5 x 185 sq.mm |
| 63 | 3.5 x 400 sq.mm |
| 64 | Plate Earth electrode |
| 65 | Supply, installation and testing of Copper Plate Earth Electrode as per IS: 3043 including Excavation, RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1001/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. each Bentonite & Charcoal shall be provided for each earth pit).(Refer Sec VI, Clause No.12.1 & 12.2). |
| 66 | Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 67 | Clearing Heavy jungle area including removal all unwanted plants, branches, twigs, wild growth, trees and saplings of girth upto 30cm, uprooting of rank vegetation etc. complete, and disposing the same 100metres away by manually or burning them without disturbing other areas etc., complete all as directed by the EIC. The useful firewood if any, shall be cut and stacked at a place (with 100metres lead) as directed by the Engineer-in-Charge. Contractor must inform the Engineer-in-charge and prior permission shall be obtained from EIC before burning the wild growth. (Refer Sec VI (MNC), Clause N |
| 68 | Removal of termination of armoured cables of following sizes from electrical equipment or reconnecting of removed termination as per the scope of work. (Refer Section V) |
| 69 | Sizes upto 4C X 25 sq.mm |
| 70 | Sizes above 4C X 25 sq.mm and upto 4C X 70 sq.mm |
| 71 | Sizes above 3.5/4C X 120 Sq.mm and up to 3.5/4C X 185 Sq.mm |
| 72 | Sizes above 3.5/4C X 240 Sq.mm and up to 3.5/4C X 400 Sq.mm |
| 73 | Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5) |
| 74 | 3/3.5/4 Core upto 25 Sqmm |
| 75 | 3/3.5/4 Core Above 25 & Upto 120 Sqmm |
| 76 | 3/3.5/4 Core Above 120 & Upto 240 Sqmm |
| 77 | 3/3.5/4 Core Above 240 & Upto 400 Sqmm |
| 78 | Retrieval of the existing one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including Removal of end termination, excavation of trenches, retrieving of bricks and back filling as per the detailed specification.(Refer Sec VI, Clause No.5) |
| 79 | 3/3.5/4 Core Upto 25 Sqmm |
| 80 | 3/3.5/4 Core Above 25sqmm & upto120 sqmm |
| 81 | 3/3.5/4 Core Above120sqmm & upto240 sqmm |
| 82 | 3/3.5/4 Core Above 240sqmm & upto 400 sqmm |
| 83 | Assisting in cable straight through or transition jointing of following size of cables by providing minor excavation, transportation of gas cylinder, jointing materials & tools, dressing the cable wherever required after job completion etc as per site condition and as directed by the Engineer-in-charge. (Refer Sec VI, Clause No.10.4) |
| 84 | Voltage grade upto 1.1kV & size upto 120 sqmm/Telephone cable upto 50 Pair |
| 85 | Voltage grade upto 1.1kV of size exceeding 120 sqmm and upto 240 sqmm/Telephone cable of size 100-200 Pair |
| 86 | Voltage grade upto 1.1kV of size exceeding 240 sqmm and upto 400 sqmm |
| 87 | Supply, erection,testing and commissioning of 415V distribution( Outdoor) feeder pillar as per the detailed specification and SLD (Refer Sec V). |
| 88 | Dismantling and Shifting of 415V Feeder pillar from IGCAR parking yard to Central stores (with in a distance of 2 Kms) as per the scope of work. (Refer Sec V). |
| 89 | Operating the dewatering pump for dewatering cable trenches and related activities. (Refer Sec V). Overall rebate (Optional) INR Zero Only Please Enable Macros to View BoQ information |
