|
| 1 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 2 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 3 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 4 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 5 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 6 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 7 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 8 | Semi rigid pipe DSR 17.28.1 |
| 9 | 32 mm dia DSR 17.28.1.1 |
| 10 | 40mm dia DSR 17.28.1.2 |
| 11 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : DSR 19.1 |
| 12 | 100 mm diameter DSR 19.1.1 |
| 13 | Providing, Laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design: DSR 19.2 |
| 14 | 100 mm diameter S.W. pipe DSR 19.2.1 |
| 15 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 16 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 17 | 100 mm dia. DSR 17.35.1 |
| 18 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989. DSR 17.35.1.2 |
| 19 | 75 mm diameter : DSR 17.35.2 |
| 20 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989. DSR 17.35.2.2 |
| 21 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 22 | 100 mm dia DSR 17.40.1 |
| 23 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 24 | Providing and fixing collar: DSR 17.57 |
| 25 | 100 mm DSR 17.57.1 |
| 26 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 27 | 75 mm DSR 17.57.2 |
| 28 | Sand cast iron S&S as per IS- 3989 DSR 17.57.2.2 |
| 29 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm |
| 30 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. DSR 18.10 |
| 31 | Internal work – Exposed on wall. |
| 32 | 20 mm dia. nominal bore DSR 18.10.2 |
| 33 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 34 | 15 mm dia nominal bore D SR 18.11.1 |
| 35 | 20 mm dia nominal bore DSR 18.11.2 |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. DSR 18.12 |
| 37 | External work |
| 38 | 25 mm dia. nominal bore DSR 18.12.3 |
| 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 40 | 20 mm nominal bore DSR 18.17.1A |
| 41 | 25 mm nominal bore DSR 18.17.1 |
| 42 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete DSR 18.18 |
| 43 | 20 mm nominal bore DSR 18.18.2 |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions: DSR 18.21.2 |
| 45 | 45 cm length DSR 18.21.2 |
| 46 | 15 mm nominal bore DSR 18.21.2.1 |
| 47 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 48 | 15 mm nominal bore DSR 18.46.1 |
| 49 | 20 mm nominal bore DSR 18.46.2 |
| 50 | 25 mm nominal bore DSR 18.46.3 |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 52 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 53 | 15 mm nominal bore DSR 18.49.1 |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 55 | 15mm nominal bore DSR 18.53.1 |
| 56 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : DSR 19.21 |
| 57 | For pipes 100 to 230 mm diameter DSR 19.21.1 |
| 58 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) without C.I. cover R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : DSR 19.30 |
| 59 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line : DSR 19.30.1 |
| 60 | With F.P.S. bricks DSR 19.30.1.1 |
| 61 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 62 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 63 | Providing and fixing CP Brass jet with brass nozzal, steel flange and PVC flexible pipe 1/2\\" approx. 1 m length of approved make DSR 17.16A |
| 64 | Providing Drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter |
| 65 | 100 mm |
| 66 | 75 mm |
| 67 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design DSR 19.4 |
| 68 | 100x100 mm size P type DSR 19.4.1 |
| 69 | With F.P.S. Bricks class designation 75 DSR 19.4.1.1 |
| 70 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 71 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 72 | Sand cast iron S&S as per IS: 3989. DSR 17.60.2.1 |
| 73 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 74 | With F.P.S. bricks DSR 18.76.1 |
| 75 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. DSR 18.77 |
| 76 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 77 | P/F of G.I. Tank nipple complete in all respects. |
| 78 | 20 mm size |
| 79 | Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to make it water proof including Cost of sand, bajri |
| 80 | Providing and fixng CP Cup complete in all respect. |
| 81 | Providing and fixng SS Grating 4\\" dia complete in all respect. |
| 82 | Providing and fixing CP Connections for Urinal complete in all respect. |
| 83 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality. DSR 18.53A Please Enable Macros to View BoQ information |
