|
| 1 | Dismantling brick work tile, masonry or tile lining |
| 2 | In cement Scraping Cement plaster |
| 3 | BRICK WORK First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level |
| 4 | WHITE WASHING, DISTEMPERING, PAINTING & POLISHING Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 5 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade |
| 6 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 7 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make aneven surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications |
| 8 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts,screws, welding rod complete fixing in position |
| 9 | Supply and installation of garden bench Rectangular garden bench with h-shaped sides made of reinforced concrete (M-30), thickness 100 mm back height 750 mm, base width 450 mm. Back and seat shall consist of rectangular reinforced concreteplanks 1500 mm x 350 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall befixed with nuts on concrete mount, all holes sealed after assembly and installation |
| 10 | LOADING AND UNLOADING By Mechanical Means Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and 0.12000 cum 2.4624Stone metal |
| 11 | CARRIAGE Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth 1.0 km |
| 12 | PROVIDING AND FIXING OF AIR WALKER |
| 13 | PROVIDING AND FIXING OF AIR SWING |
| 14 | PROVIDING AND FIXING OF HORSE RIDER |
| 15 | PLASTERING & POINTING 20mm thick cement plaster 1:2 in two coat work |
| 16 | Informatory sign board 600x450mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to backsupport frame of 25x25x3mm angle iron supported on a square hollow steel section post60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012 |
| 17 | Overhead sign board 6000x1500mm cantilever type single sided as per IRC 67-2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 40x40x6mm angle iron supported on designed single support system of MS pipe and plates in the form of a cantilever type truss made with 350NB pipe @50kg per mtr as vertical support, 50NB pipe @ 4.50kg per mtr and 40NB pipe @ 3.61kg per mtr for truss including base plates, gusset plates,designed RCC foundation for fixing in ground complete as per clause 802 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012 |
| 18 | Bricks First Class (Clay/Fly Ash) (at kiln site):- (Note:- District wise rates for Bricks / tiles attached at Annxure-II) Recovery of Brick bats from well burnt or burnt bricks. Please Enable Macros to View BoQ information |
