Tender For Annual Maintenance Of 3 Lane Bridge On Nh-10 In U/E, Rohtak, Providing And Fixing Of Speed Bumps (Plastic Speed Breaker) With Apoxy Adhesive And Bitumax Material, Cat Eyes And Delineators At Various Master Roads In U/E, Rohtak And All Othe, Rohtak-Haryana
TDR : 54705977
Tender Notice
BOQ
5 Days Left
Rohtak
Haryana
Tender For annual maintenance Of 3 Lane Bridge On Nh-10 In U/E, Rohtak, Providing And Fixing Of Speed Bumps (Plastic Speed Breaker) With Apoxy Adhesive And Bitumax Material, Cat Eyes And Delineators At Various Master Roads In U/E, Rohtak And All Othe
Name of Work:- A/mtc of 3 Lane bridge on NH-10 in U/E, Rohtak, `Providing and fixing of speed bumps (Plastic Speed Breaker) with apoxy adhesive and bitumax material, cat eyes and delineators at various master roads in U/E, Rohtak and all other works contingent thereto`. A/c Rs. 1.97 Lacs Em Rs. 3940/- Time Limit : - 01 Month
Sl. No.
Item Description
1
[34.34]Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values @ ASTM E 809 & ASTM D 4280. The detailed specifications and the product shall conform to ASTM D4280 and ASTM E 809. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 like abrasion resistance and fixed to the road surface using the epoxy adhesive. Two cylinderical polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be moulded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl Methacrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.
2
[34.37]Road Delineators Providing and fixing of standard Metal Delineator as per IRC 79:2019 consisting of retro reflective area in white colour using Microprismatic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per Class C table specification. The delineator shall be painted with only black colour powder coat of minimum 40 microns thickness, on top of retro reflective sheeting only in white colour shall be pasted on both sides. The structure shall have height not less than 800 mm above ground, width not less than 100 mm and shall extend not more than 300 mm below ground while being installed. The delineator shall have grooves across the length to make the reflective sheet vandal proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc or as desired by site engineer. The product shall be provided with 3 year outdoor warranty report tested in India condition as per IRC 67: 2012 requirement.In case of soft ground, a proper foundation may be provided as per approved design. In case foundation is required to be provided, the items of excavation and foundation concrete are required to be measured and paid separately.
3
NS Item) Providing and fixing Speed Bumbs (Plastic Speed Breaker) with apoxy adhesive and bitumax material complete in all respect as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
