|
| 1 | Rate for flushing of borewell of 6” dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by ‘V’ notch method if required. |
| 2 | Earthwork excavation for foundation in all types of soils and sub-soils and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete (For Foundation) |
| 3 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M - Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Brick work using Country Bricks of size 8-3/4\\" x 4-1/4\\" X2-3/4\\"\\" in Cement Mortar 1:5 (One cement and five crushed stone sand) including curing neat finishing, etc., complete complying with standard specification. |
| 5 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 6 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 7 | Supply and delivery of clear water vertical wet type submersible pump conforming to IS8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPMagainst head of water column due to all causes. The pump shall be with stainless steel shaftand dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pumpbowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two polesuitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase230 V+/- 10 %,50 HZ +/-5 % |
| 8 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days |
| 9 | Supply and delivery of 4.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications |
| 10 | Supply and Delivery of 25mm 'U' PVC pipe with ISI Mark including all cost of all material charges and all labour charges etc., complete as per standard specifications |
| 11 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amendedthereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole MagneticContactor with under Voltage protection, Indication lamp, starting capacitor, running capacitorand On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVCinsulated cable, powder coated vermin proof box including the capacitor (the cost of capacitoris to be taken separately). |
| 12 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete |
| 13 | Supplying, delivery, laying and jointing of 32 mm PVC dia PVC pipe working pressure 10 Kg per cm2 (WITH ISI MONOGRAM) including cost of all material charges and labour charges etc., complete as per Specifications |
| 14 | Supplying, delivery, laying and jointing of 25 mm dia GI pipe B Class of approved quality and best variety conforming to I.S.S & with I.S.I mark including cost of all material charges and labour charges etc., complete as per Specifications |
| 15 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost of all material charges and labour charges etc, complete as per standard specification |
| 16 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GIpipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains |
| 17 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuseunit (500V) 32A neutral link and earth link (1\\"x1/8\\" copper flat) on TWplank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TWplank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection |
| 18 | Earthing as per PWD standard with an earth electrode of 2metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. |
| 19 | Supply delivery and fixing of GI & PVC Borewell Specials including cost of all materials etc.,complete |
| 20 | Bore cover plate (L.R) |
| 21 | 25 mm GI Flange set (L.R) |
| 22 | Collar set (Top and Bottom) (L.R) |
| 23 | 25 mm MS Clamp set (L.R) |
| 24 | 25mm GI Bend (PWD SOR 2025-26 M-0455) |
| 25 | 25mm GI Tee (PWD SOR 2025-26 M-0461) |
| 26 | 25mm GI Coupling (PWD SOR 2025-26 M-0467) |
| 27 | 32mm PVC Coupling (PWD SOR 2025-26 M-0883) |
| 28 | 32 PVC Ball Valve (L.R) |
| 29 | 32mm PVC Elbow (PWD SOR 2025-26 M-0889) |
| 30 | 32mm PVC TEE (PWD SOR 2025-26 M-0901) |
| 31 | 25mm GI Elbow (PWD SOR 2025-26 M-0449) |
| 32 | Nylon Rope |
| 33 | Supply and delivery and fixing of 10000 litres HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 34 | GST 18% Please Enable Macros to View BoQ information |
