|
| 1 | SUBWROK NO 4- PUMPING MACHINERY Item No. 1 Providing erecting and giving test of submersible pump set confirming to IS. 8034 and motor confirming to I.S. 9283 with water proof binding pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 415 10% 3 ph 50 Hz A.C. supply with cable gurad thrust carbon fiber bearing to with stand entire hydrulic thrust .the pump set shall be suitable for direct coupling with suitable saction stainer pu mp should have suitable discharge outlet as per manufacture design antithrust stream non retun valve shall be provided with the pump 3 m submersible copper conductor cable in single / double run 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump Submersible pump 3.0 HP with errection |
| 2 | Item No. 2 Providing erecting commissinory L.T. panel board with all required accessories for the pump in above item No. 1.. etc.complete |
| 3 | Item No. 3 A) Supplying and erecting Flat flexible submersible cable with copper conductor PVC insulated and PVC sheathred 1 x 3 x 4 sqm |
| 4 | B) Providing and erecting P.V.C. armoud cable 1100V grade with ISI mark 3.5 core Solid / standard aluminium conductor with 6 mm thick 25 mm width m.s.. Spacer with G.I. Earth wire 6 Sq. mm complete erected on wall / on Pole with 25 X 3mm M.S. Clamp in provided trench in an approved manner 4 Core 10 Sq. mm |
| 5 | Item No. 4 Supplying and erecting G.I. Pipe 'B' in position for suction and delivery for submersible pump including pumbing with socket and necessary material 50 mm. Dia |
| 6 | Item No. 5 Providing and erecting presure gauge of required capacity complete with syptio tube isolating cock suitable for 12 mm dia G.I. Pipe pressure gauge shall be installed as directed with tapping on rising main 100 mm. Dia |
| 7 | Item No. 6 Providing ISI mark G.I. Pipe of following class and dia including all local and central taxs octrai inspection charges transporatation to store etc… complete medium 15 mm. Medium Providing L.L joint |
| 8 | Item No. 7 Providing and supplying G.I. special at site including all taxes (central & Local )RailwayFright Insurances on loading from Railway wagon Loading Truck Transport to store/site unloading etc.. Comp. As directed by Engineer in Charge G.I Pipe specials |
| 9 | Item No. 8 Providing and supplying ISI mark C.I. D/F reflux valve (non return valves) of following dia including all taxes (central and local) railway freight inspection charges loading unloading from railway wagon transportation upto departement store etc. complete IS 5312 (1984) 50 mm dia P.N. 1 with fixing |
| 10 | Item No. 9 Providing and supplying ISI mark C.I.D.F sluice valve of following dia including all taxes (central and local railway freight inspection entries unloading from railway wagon loading into truck transportation upto departmental store/site unloading stacking etc. complete. 50 mm dia P.N. 1 with fixing on delivery side |
| 11 | Item No. 10 Providing and making flaged Joint to flange, C.I. Pipes / M.I. Pipes and specials of all classing including cost of jointing material rubber packing nut bolts labour charges hydrulic testing etc. complete 80 mm dia Joint |
| 12 | Item No. 11 Providing earthing with Galvanized cast ironearth plate size 60 x 60 x 0.6 cm complete withall materials, testing & recording the results asper specification No. EA-EP |
| 13 | Item No. 12 Providing and fixing wall mounting type name board duly painted all details of pumping machinery make, model frame no. DR no. Date of installation commissioning manufacture year agoncy name aggrement no details of G.I. Shal 18 gauge of required size duly painted with red oxide and enamus paint for dispaying the above details board shall be provided with suitable T.W. bottom back side name board |
| 14 | Item No. 13 Providing tools with tool box etc complete |
| 15 | SUBWROK NO 5-RISING MAIN Item No. 1 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. A) 75 mm Dia HDPE 6 kg/sq.cm pipe |
| 16 | Item No. 2 Provding ISI mark G.I. pipe of following class and dia. Excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores. Etc complete. b) 65 mm dia. GI MD pipe |
| 17 | Item No. 3 Providing and supply HDPE specials suitable for HDPE pipe of 8 kg/sq.cm … etc complete. 3 % cost of pipes |
| 18 | Item No.4 Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete. 300 mm RCC NP-III, Collar Joint |
| 19 | Item No. 5 Providing and supplying at site of work CI D/F valves of following dia., including cost of all taxes (central and local) railway freight, unloading from railway wagon, loading into truck, transportation upto site of work, etc. complete 65 mm dia for washout Valve & Branch Sluice Valve(PN 1) |
| 20 | 15 mm dia Single Ball Flanged Air Valve PN 1 |
| 21 | Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand gravel and soft murum including removing the excavated materialupto a distance of 50 m, stacking and spreading as directed, dewatering, shoring and strutting, preparing the bed for the foundation etc. complete In soils of all type |
| 22 | Item No. 2 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. In Hard Murum |
| 23 | Item No. 3 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. In Soft Rock |
| 24 | Item No. 4 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) In Hard Rock |
| 25 | Item No. 5 Filling in plinth and floors / excavated trenches with approved excavated materials from foundation in 15 to 20 cm. Layers, including waering compaction, etc. complete Murum Bedding |
| 26 | Item No. 6 Lowring laying and jointing with HDPE pipes & specials of following class & diameter including cost of conveyance from stores to site of works including cost of all labour materials excppect cement solvent … etc complete A) 75 mm Dia HDPE 6 kg/sq.cm pipe |
| 27 | Item No. 7 Lowring laying and jointing with GI pipes & specials of following class & diameter including cost of conveyance from stores to site of works including cost of all labour materials excppect cement solvent … etc complete b) 65 mm dia. GI MD pipe |
| 28 | Item No. 8 Hydraulic testing of HDPE pipe line to specificed pressure ,, etc complete A) 75 mm Dia HDPE 6 kg/sq.cm pipe |
| 29 | Item No. 9 Hydraulic testing of GI pipe line to specificed pressure , etc complete b) 65 mm dia. GI MD pipe |
| 30 | Item No. 10 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 65 mm dia for washout Valve & Branch Sluice Valve(PN 1) |
| 31 | Item No. 11 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) 15 mm dia Single Ball Flanged Air Valve PN 1 |
| 32 | Item No. 12 Providing and constructing B.B. Machinery Valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, exlcuding excavation, B.B. Masonry in CM 1:5 proportion precast RCC frame & cover, etc. complete ad directed by Engineer-in-charge As above of 09 x 06 m internal size depth upto 1.2 m with precast RCC slab cover |
| 33 | Item No. 13 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) For 220 to 400 mm dia. A)Foundation on Murum & Hard Strata |
| 34 | Item No. 14 Providing and casting in situ cement concrete for CC work in M.15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water manually formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete M:150 |
| 35 | Item No. 15 Refilling the trenches with available exvavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete Refilling |
| 36 | SUBWROK NO 6-RCC ESR Item No. 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, |
| 37 | Item No. 2 Provding ISI mark G.I. pipe of following class and dia. Excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores. Etc complete. A ) GI D/F Pipes inlet & overflow -65 mm Dia. |
| 38 | Outlet - 65mm Dia. |
| 39 | B) DI Specials 80 mm to 300 mm |
| 40 | Item No. 3 Providing and supplying at site of work CI D/F valves of following dia., including cost of all taxes (central and local) railway freight, unloading from railway wagon, loading into truck, transportation upto site of work, etc. complete C) CI / DF Sluice Valve 65 mm dia PN 1 |
| 41 | SUBWROK NO 7-DISTRIBUTION SYSTEM Item No.1 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 75 mm dia PVC 4Kg/cm2 |
| 42 | Item No-2 Provding ISI mark G.I. pipe of following class and dia. Excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores. Etc complete. For Road, Canal & Nala Crossing 65 mm Dia. GI(MD) class pipes |
| 43 | Item No. 3 Providing and supply PVC specials suitable for PVC pipe of 4 kg/cm2 … etc complete 10 % cost of pipes |
| 44 | Item No. 4 Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete. 300 mm RCC NP-III, Collar Joint |
| 45 | Item No. 5 Providing and supplying at site of work CI D/F valves of following dia., including cost of all taxes (central and local) railway freight, unloading from railway wagon, loading into truck, transportation upto site of work, etc. complete 65 mm dia PN 1, without by pass arrangement |
| 46 | Labour Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand gravel and soft murum, Hard Murum including removing the excavated materialupto a distance of 50 m, stacking and spreading as directed, dewatering, shoring and strutting, preparing the bed for the foundation etc. complete (A)Soil |
| 47 | Item No. 2 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated materialupto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) (B)Hard Murum |
| 48 | Item No. 3 Excavation for foundation / pipe trenches in soft rock, and old cement and lime masonary foundation asplalt road including removing the excavated materialupto a distance of 50 m, stacking and spreading as directed, dewatering, shoring and strutting, preparing the bed for the foundation etc. complete Soft rock |
| 49 | Item No. 4 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blastingincluding trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed byEngineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Hard rock |
| 50 | Item No. 5 Filling inplinth and floors / excavated trenches with approved excavated materials from foundation in 15 to 20 cm. Layers, including waering compaction, etc. complete Murum bedding |
| 51 | Item No. 6 Lowering laying and jointing with PVC pipes & specials of following class & diameter including cost of conveyance from stores to site of works including cost of all labour materials expect cement solvent … etc complete 75 mm dia PVC 4Kg/cm2 |
| 52 | Item No. 7 Lowering, laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to sites, all labour, etc complete. 65 mm Dia. GI(MD) class pipes |
| 53 | Item No. 8 Hydraulic testing of PVC pipe line to specificed pressure , etc complete 75 mm dia PVC 4Kg/cm2 |
| 54 | Item No. 9 Hydraulic testing of G.I. pipe line to specificed pressure ,, etc complete 65 mm Dia. GI(MD) class pipes |
| 55 | Item No. 10 Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) 300 mm RCC NP-III, Collar Joint |
| 56 | Item No. 11 Labour charges for fixing of various valves of following nominal dia. Including cost of conveyance from stores to site of work, labour, jointing materials, giving satisfactory hydraulic test etc. complete 65 mm dia PN 1, without by pass arrangement |
| 57 | Item No-12 Providing and constructing B.B. Machinery Valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, exlcuding excavation, B.B. Masonry in CM 1:5 proportion precast RCC frame & cover, etc. complete ad directed by Engineer-in-charge |
| 58 | Item No. 13 Providing and fixing CI road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete 225 mm x 300 mm (40 kg) |
| 59 | Item No. 14 Providing and casting in situ cement concrete for PCC work in M-15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water manually formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete PCC M:150 |
| 60 | Item No. 15 Refilling the trenches with available exvavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete Refilling |
| 61 | SUBWROK NO 9- TRAIL RUN Item No. 1 Commissioning, running & maintaining the scheme to quantity, rated capacity, including managing necessary personal such as operator valveman etc. as per requirements of the scheme and who should also administer chemical dose for a period of year togather with training of personal spared by MJP / local body & handing ever the scheme to local body after completion of above period as directed by Engineer-in-charge. |
| 62 | SUBWROK NO 11-FHTC Item No. 1 'Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer in 'With road crossing |
| 63 | Without road crossing Please Enable Macros to View BoQ information |
