|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling of AC ( corrugated or semi corrugated) sheets or ridge as in roofs covering complete all as specified and directed. |
| 3 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | S&F for steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240 complete all as specified and directed. |
| 6 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc gde Fe-410 W (Gde E- 250) quality A complete all as specified and directed. |
| 7 | M&L for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation complete all as specified and directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed. |
| 9 | S&F for aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of distemper oil emulsion complete all as specified and directed. |
| 10 | Taking down chowkats or frame, n. exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 11 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 & n.exc. 4 sqm in each complete all as specified and directed. |
| 12 | Taking down and Refixing shutter in same opeining of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed. |
| 13 | Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 14 | Taking down shutter of any description n exc 1sqm each complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed. |
| 17 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed. |
| 18 | S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and complete all as specified and directed. |
| 19 | S&F solid PVC moulded door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed. |
| 20 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified and directed. |
| 21 | S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 22 | S&F fix 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 23 | S&F for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 24 | S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), complete all as specified and directed. |
| 25 | S&F in repairs brass mortice lock, vertical type, size 65mm, 2 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed. |
| 26 | S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as spd complete all as specified and directed. |
| 27 | S&F in repairs Extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified and directed. |
| 28 | S&F as in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | S&F in repairs butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding all complete all as specified and directed. |
| 30 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified and directed. |
| 31 | S&F in repairs MS steel window stay 300 mm long for steel windows all complete all as specified and directed.. |
| 32 | S&F in repairs handles for steel windows (Left & Right) all as specified and directed. |
| 33 | Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length complete all as specified and directed. |
| 34 | Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 35 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 36 | S&F in repairs for MS grating CP 75/100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed. |
| 37 | S&F in repairs Brass CP Wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed copmplete all as specified and directed. |
| 38 | S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail. |
| 39 | M&L MS flat iron work as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc conforming to Fe-290 Gde-E-165 complete as specified and directed. |
| 40 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately) |
| 41 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 complete all as specified and directed. |
| 42 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, but with particle board core complete all as specified and directed. |
| 43 | S&F 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all complete as specified and directed. |
| 44 | S&F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed |
| 45 | S&F as in repairs for steel windows with side double hung shutters incl. box type hinges with steel handles & steel peg stay, with glazing bars, dove tailed or welded incl taking out old unserviceable window complete all as specified and directed. |
| 46 | S&F as in repairs for steel windows with side double hung shutters incl. box type hinges with steel handles & steel peg stay, without glazing bars, dove tailed or welded incl taking out old unserviceable window complete all as specified and directed. |
| 47 | S&F as in repairs for steel ventilators with top hung shutters incl. hinges, steel peg stay incl taking out old unserviceable window complete all as specified and directed. |
| 48 | S&F powder coated aluminium anodised frame for doors, windows etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 49 | S&F aluminium anodised powder coated (minm thickness of powder coating 50 micron) door shutters , aluninium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neopriene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 50 | S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 51 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 52 | Supply only sheet glass ordinary quality,in squares exc. 0.5 Sqm complete all as specified and directed. |
| 53 | Supply only 4.8mm thick sheet glass ordinary quality,in squares n. exc. 0.5 Sqm each 4.8 mm thick complete all as specified and directed. |
| 54 | Taking down Cupboard Shutters of any description exc 1 Sqm and n exc 2 Sqm complete all as specified and directed. |
| 55 | S&F 18/19mm pre-laminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in shutter of cup board and other similar work complete all as specified and directed. |
| 56 | S&F 40mm Continuous (piano) hinges width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F butt hinges 100mm long cold rolled medium weight complete all as specified and directed. |
| 58 | S&F 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and directed. |
| 59 | S&F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed. |
| 60 | S&F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150mm long complete all as specified and directed. |
| 61 | S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 62 | M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
| 63 | M&L preparation of new untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete as specified and directed. |
| 64 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18mm & fixed with tinned tacks are galvanized wire staples complete all as specified and directed. |
| 65 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 66 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as specified and directed. |
| 67 | S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed. |
| 68 | Material and labour for providing and injecting chemical emulsion for post constructional anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with cement mortar (1:3) & painted with white or coloured paint complete all as specified and directed |
| 69 | Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified and directed. |
| 70 | M&L for broken bricks hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 71 | S&F Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment laid over sand cushing complete all as specified and directed.Note :- Sand cushioning will measured and paid seperately. |
| 72 | M&L for sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as specified and directed. |
| 73 | M&L for Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) set and jointed in cement mortar 1:6, complete all as specified and directed. |
| 74 | M&L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed. |
| 75 | M&L for prepolished, chequered cement concrete tiles of size 25cmx25cmx22mm thick, as in floors etc,over and including 15 mm thick screed bed or bedding in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed. |
| 76 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 77 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 78 | M&L for 25 mm thick PCC type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling layer complete all as specified and directed. |
| 79 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. |
| 80 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. |
| 81 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over and 20mm thick screed bed in CM 1:4 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 82 | M&L for glazed ceramic tiles in vertical surface 300x450x7mm thick in dado over and including 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete as specified and as directed |
| 83 | M & L 75 mm thick PCC type D-2 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 84 | M&L for Machine cut kota stone slab flooring 20 to 25mm thick size not less than 22\\" x 22\\" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed. |
| 85 | M&L for kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed. |
| 86 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work omplete all as specified and directed. |
| 87 | S&F in repairs 600 x 450mm beveled edged mirror of selected qualtity glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed. |
| 88 | S&F in repairs sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mm x 160mm incl 32 mm PVC flexible waste pipe complete all as specified and directed. |
| 89 | Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 90 | Refixing 15mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 91 | S&F steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 92 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 93 | Refixing 20mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 94 | S&F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 95 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as specified and directed. |
| 96 | S&F in repairs 15 mm bore Bib taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 97 | S&F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 98 | S&F in repairs, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 99 | S&F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 100 | S&F in repairs health faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1 mtr long suitable for 15mm pipe complete all as specified and directed. |
| 101 | S&F in repair soap dish of stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed |
| 102 | S&F Towel ring CP (Cat Part No T6904A1 of make – Parryware or equivalent of Jaquar/Marc) make as specified in PS complete all as specified and directed. |
| 103 | S&F in repairs flexible (coil shaped) PVC waste pipe for sink and wash hand basin 32/40mm dia, length not less than 70 cm, connected to PVC waste coupling/fittings complete all as specified and directed. |
| 104 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and directed. |
| 105 | S&F in repairs for PVC internal fittings (kit) complete for low level flushing cistern tank, complete all as specified and directed by Engineer-in-Charge. Make Commander/Perryware. |
| 106 | S&F in repairs Vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets,excluding pillar cock 15 mm bore CP, PVC connection of 450 mm long including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed. |
| 107 | S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 108 | S&F in repairs, 15 mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 109 | S &F in repairs, swivel shower rose of PTMT, 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and directed. |
| 110 | S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed. |
| 111 | S&F for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor incl seat cover complete as in repair complete all as specified and directed. |
| 112 | S&F in repairs vitreous china wash down water closet pan (single piece WC with S trap), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed. Make : “Cardiff Range” of Parryware equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved. by GE. |
| 113 | S&F in repair for Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe incl CP 40mm waste coupling and PVC 40mm waste pipe 900mm long complete all as specified and directed. |
| 114 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 115 | S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 116 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks as specified in SSR Part-I complete all as specified and directed. |
| 117 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks as specified in SSR Part-I complete all as specified and directed. |
| 118 | S&F in repair top cover for water storage tank of any capacity, the colour of cover shall be matching with the existing tank's colour complete all as specified and directed. |
| 119 | S&F 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 120 | S&F as in repairs for Gun metal gate valves with iron wheel headscrewed both ends for iron pipes or for unions for 20 mm bore pipes, complete all as specified and directed. |
| 121 | S&F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 122 | Taking down plastering on lathing other than wire netting without removing lathing, in lime/cement mortar (One side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 123 | M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. In walls, ceilings, stanchions, beams, etc. Including all laps, cutting and waste including lath plaster CM 1:4 complete all as specified and directed. |
| 124 | M&L for rendering 15mm thick on other then fair faces of brick or concrete surfaces of wall in CM 1:4 complete all as specified and directed. |
| 125 | M&L for rendering 10mm thick on other then fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and directed. |
| 126 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 127 | M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even .The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed. |
| 128 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 129 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 130 | M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceilings (sunshade, chajja etc) and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 131 | Supply only liquid water proofing compound complete all as specified and directed. |
| 132 | M&L preparing newly plastered surfaces of wall and applying three coats of white wash complete as specified and directed. |
| 133 | M&L preparing new plastered surfaces of ceiling and applying three coats of white wash complete as specified and directed. |
| 134 | M&L applying two coats of distemper oil emulsion over coat of primer including wall care putty on walls after preparing surfaces of walls on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed. |
| 135 | M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 136 | M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of cement base paint including scaffolding upto 30 mtr of height complete as specified and directed. |
| 137 | M&L for prepration of old plastered or unplastered surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 138 | M&L 75 mm thick plain cement concrete 1:3:6, type c-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:2) complete as specified and directed. |
| 139 | S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 140 | S&F in repairs curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 141 | S&F in repair 15mm bore, GI socket, Hex Nipple, GI Nipple 75mm, Nipple 100mm, Nipple, 150mm long, GI Tee, GI Tee,GI Elbow, GI reducer(15mmx20mm), (GI reducer (15mmx25mm) complete all as specified and directed. |
| 142 | S&F in repair 15mm bore, GI Union, GI Tank Nipple complete all as specified and directed. |
| 143 | S&F in repair 20mm bore, GI Socket, Hexa Nipple, GI Nipple75mm,Nipple 100mm, Nipple 150mm, GI Tee, GI Elbow, GI reducer (15mmx20mm), GI reducer (15mmx25mm) complete all as specified and directed. |
| 144 | S&F in repair 20mm bore GI Union, GI Tank Nipple complete all as specified and directed. |
| 145 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 146 | M&L brick work with sub class 'B' bricks well burnt straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed. |
| 147 | M&L brick work with sub class -B old size bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 148 | M&L PCC typeC-1,1:3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and directed. |
| 149 | M&L for RCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. (Note : Reinforcement shall be measured and paid seperately under relevant) |
| 150 | M&L TMT bar 10 mm and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 151 | M&L form work to soffit of suspended slab such as roof, floor slabs, landing similar work for rough finished surfaces of concrete, flat complete all as specified and directed. |
| 152 | M&L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10cm wide for rough finished surfaces of concrete, flat complete all as specified and directed. |
| 153 | M&L for 16-18mm thick Granite black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 154 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 155 | Checking and attending to complaints of no water supply, water leakage from bib taps, stop cock, pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/basin mixer, angle valve, concealed valve,shower rose , health faucet & jet, float valve, of any type & size or any other water supply fittings/fixtures incorporated in plumbing works any where in the bldgs which is causing obstruction to water supply in area & requires plumbing including carrying out minor repair such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread (soot), Teflon tape, M-Seal, screws (any size), nails (any size) to make water supply/plumbing lines & fiittings/fixtures functional and leak proof to the satisfaction of the occupants/ users complete all as directed.Note : (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants. (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail. |
| 156 | Checking and attending to carpenter complaints from all joinery works/cup boards etc including petty repairing wk with materials like nails/screws/beads/oil putty as per site requirement to the satisfaction of the occupants/users complete all as directed.Note : (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants. (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail. |
| 157 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 158 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 159 | S&F Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges of thickness 1.25mm of dia 150mm complete all as specified and directed. |
| 160 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified including dismantling of PCC & taking out old unserviceable 110mm bore PVC pipe with fittings & making good disturbed area complete all as specified and directed. |
| 161 | S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls fixed in repair complete all as specified and directed. |
| 162 | S&F PVC (SWR) branch piece single (single Y)110 mm bore with access door fixed in repair complete all as specified and directed. |
| 163 | S&F PVC (SWR) bends any radius 110 mm dia fixed in repair complete all as specified and directed. |
| 164 | S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed. |
| 165 | S&F PVC(SWR) Vent cowl 75mm dia complete all as specified and directed. |
| 166 | S & F 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete as specified and directed. |
| 167 | S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete as specified and directed. |
| 168 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with granting including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
