Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER,CHENNAI SER. PAGE NO: Name of Work: SPECIAL REPAIRS TO SPORTS INFRASTRUCTURE AT MTTI AT AF STN UNDER GE AVADI Contract No: CWE/AVD / OF 2026-2027 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION : |
| 3 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises complete all as specified and directed. |
| 4 | M&L for roughening the surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust complete all as specified. |
| 5 | Dismantling of stone slab and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed |
| 6 | M&L for demolition of cement concrete (unreinforced ) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified. |
| 7 | M&L for demolition Reinforced Cement concrete concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified. |
| 8 | Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as specified |
| 9 | Taking down of chowkhats / frames of any description not exceeding 1.50 sqm each without taking off shutter from the frame complete all as specified |
| 10 | Taking down of chowkhats / frames of any description exceeding 1.50 Sqm but not exceeding 4.0 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 11 | Taking up or down old steel tubing of 15mm dia with connections including cleaning for refixing or removal to store complete all as specified. |
| 12 | Taking up or down old steel tubing of 20mm dia with connections including cleaning for refixing or removal to store complete all as specified. |
| 13 | Taking up or down old steel tubing of 25mm dia with connections including cleaning for refixing or removal to store complete all as specified. |
| 14 | Taking down PVC pipes /any other pipe of any size including all fittings, head shoes, bends swan necks etc including cleaning for re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as directed. |
| 15 | Dismantling plain or corrugated steel sheeting of any guage /thickness including Nainital or similar pattern roof covering complete all as specified. |
| 16 | M&L for dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 17 | Demolition of stones or brick masonry or block walling built in cement mortar of any description including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete all as specified and as directed. |
| 18 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets of any thickness including cover fillets as in ceiling complete all as specified. |
| 19 | M&L for old size brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in cement mortar 1:6 complete all as specified |
| 20 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified & directed. |
| 21 | M&L for broken glass coping on top of walls laid over cement mortat 1:3 complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 , finished fair and even (on external surfaces) complete all as specified and directed. |
| 23 | M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement (on internal surfaces), complete all as specified and directed |
| 24 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling, surface ,finished even and smooth without using extra cement, complete all as specified and directed. all as specified. |
| 25 | M&L for preparation of new plastered or unplastered surfaces of walls with sand paper and make the surface smooth and applying two coats of exterior grade paint weather resistant over a coat of primer complete all as specified and directed. |
| 26 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 27 | M&L for preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment from the old wall surface of any description including preparing the surface by brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spoutes and cleaning with water on wall and make the walls surface smooth and applying two coat of exterior grade paint weather resistant over a coat of primer complete all as specified and directed.. |
| 29 | M&L for complete removal of existing treatment from the old wall surface of any description including preparing the surface by brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spoutes and cleaning with water on wall and make the walls surface smooth and and applying two coats of oil bound distemper over a coat of alkali resistand primer including 3mm thick wall care putty for smooth surface complete all as specified and as directed. |
| 30 | M&L for preparation of old plastered or unplastered surfaces of ceilings including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and as directed. Note for ser. item No 23 to 28: After painting / white wash the surface of floor,door,windows ,glass panes etc shall be cleaned and free from paint flashing etc and quoted rate shall be inclusive for the above provision |
| 31 | M&L for reinforced design mix M-25 grade concrete using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all a specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 32 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished flat surfaces of concrete complete all as specified and as directed |
| 33 | M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | M&L for mild steel TMT bars 8mm dia and over upto including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | M&L for Non-skid ceramic coloured tiles (matt finish),superior finish, grade B1 quality 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in cement mortar 1:4, over a coat of cement slurry at the rate of 3 kg / Sqm complete all as specified and as directed. |
| 36 | M&L for virified ceramic tiles dark Shade / Double tiles charged / ultra charged superior finish, grade B1 quality 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in cement mortar 1:4, over a coat of cement slurry at the rate of 3 kg / Sqm complete all as specified and as directed. |
| 37 | S&F for glazed ceramic coloured tile of size 350mm x 250mm / 450mm x 350mm / 300 x 450mm minimum 7mm thick in vertical surfaces (for swimming pool ) such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including a backing coat 10mm thick in cement mortar 1:4. mixed with water proofing compound as per Manufacturer's instructions complete all as specified and as directed. Note : Colour and size of tile shall be approved by GE before incorporation and WPC shall be measured and paid separately under relavant item. |
| 38 | S&F for glazed ceramic coloured tiles of size 350mm x 250mm / 450mm x 350mm / 300 x 450mm minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including a backing coat 10mm thick in cement mortar 1:4. complete all as specified and as directed. |
| 39 | M&L for plain cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate ,25mm thick , as in levelling course complete all as specified and directed. |
| 40 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. |
| 41 | M&L for providing PCC 1:2:4, type B0 using 12.50mm graded stone aggregate as in seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platescoping including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed. |
| 42 | M&L for rubber moulded coloured chequered cement concrete tiles machine pressed of size 50cmx 35cmx 22mm to 25mm thick with grey cement, set jointed in neat cement slurry and pointed with coloured cement to match with colour of tile , laid over and including 15mm thick screed bed in cement mortar 1:4 complete, all as specified. |
| 43 | M&L for coloured vitrified paving tiles ( for outdoor) , joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match colour of tiles complete all as specified . Make : HR Johnson - Endura series or equivalent type and make as specified in particular specification . |
| 44 | M&L for 60 mm thick machine pressed precast concrete interlocking paver block factory manufactured (ISI Marked) any shape and size conforming to IS 15658-2006 of M-35 Grade,casted with grey cement and top layer with grey cement and without pigment as in floor,pavement,etc complete all as specified and directed. |
| 45 | M&L for Sand filling under floor as cushioning to paver block including watering and consolidation all as specified and directed. |
| 46 | M&L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 47 | M&L for Machine cut kota stone slab flooring 20 to 25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 including cutting, rubbing, grinding and polishing etc complete all as specified. |
| 48 | M&L for Machine cut kota stone slab flooring 14 to 16 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10 mm rendering layer in cement mortar 1:4 including cutting, rubbing, grinding and polishing etc complete all as specified. |
| 49 | M&L for green marble 18 to 20 mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs,pillars, window, cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of including 15 mm thick screed bed in cement mortar 1:6, complete all as specified. |
| 50 | M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate , 75 mm thick as in plinth protection ,finished the surface even and smooth without using extra cement complete all as specified . |
| 51 | M&L for Bitumastic gola, with 80/25 grade bitumen mixed with coarse sand mixture. 1:3 by weight, at the junction of plinth protection surfaces complete all as specified. |
| 52 | M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in drain and surface chennels including throating including use and waste of form work and finishing the exposed faces of concrete even and smooth without using extra cement complete all as specified and as directed. |
| 53 | M&L for extra for forming fair finished channael not exceeding 55cm in girth by using extra cement including forms moulds/ mitred/ stopped end, etc., complete all as specified and as directed. |
| 54 | S&F second class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified. |
| 55 | S&F second class hard wood 35 mm thick plain, framed,panelled shutters(any number ofpanels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, woodp article board with commercial face veneers: suppliedand fitted to chowkats , complete all as specified. |
| 56 | S&F Stainless steel butt hinges, medium weight, bright polished and fixed, 100mm size fixed with screws |
| 57 | S&F Aluminium handles, cast type, anodisedhandle 150 mm cast type anodized |
| 58 | S&F aluminium anodised barrel tower bolts of extruded section of 150mm size complete all as specified |
| 59 | S&F 300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified |
| 60 | M&L for prepartion of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified. |
| 61 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm thick MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 62 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR complete all as specified. |
| 63 | Supply, fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame as specified below, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738).(d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:-Section No refered bove shall be of make Jindal, Contractor shall also use similar section of other make INDAL/ HINDAL/ WALCO and as mention in particular specification .If aluminium section as specified shall not avaible in market ,contractor shall use the nearest higher size section after necessary from Engineer-in-Chrage without any extra cost |
| 64 | Supply, fabricate and fixing in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position all as specified and directed. Note:-(a)Section No refered bove shall be of make Jindal, Contractor shall also use similar section of other make INDAL/ HINDAL/ WALCO and as mention in particular specification .If aluminium section as specified shall not avaible in market ,contractor shall use the nearest higher size section after necessary from Engineer-in-Chrage without any extra cost (b MAKE OF GLASS:ATUL/ MODI GUARD/ SAINT GOBAIN. |
| 65 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021)(b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581)(d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Note:-Section No refered bove shall be of make Jindal, Contractor shall also use similar section of other make INDAL/ HINDAL/ WALCO and as mention in particular specification .If aluminium section as specified shall not avaible in market ,contractor shall use the nearest higher size section after necessary from Engineer-in-Chrage without any extra cost |
| 66 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) partition wall, partly glazed with 5.50 mm thick tinted glass and partly panlled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position etc all as specified below complete all as specified and directed. (a) Outer member top & verticle section shall of size 101.60 x 44.45 x 2.5 mm ( Section No 20102) (b) Middle member top & verticle section shall of size 101.60 x 44.45 x 2.5 mm ( Section No 20057) (c) Glazing clip for securing glass / panel shall be be of 0.80 mm thick (Section No 19370). Note:-Section No refered bove shall be of make Jindal, Contractor shall also use similar section of other make INDAL/ HINDAL/ WALCO and as mention in particular specification .If aluminium section as specified shall not avaible in market ,contractor shall use the nearest higher size section after necessary from Engineer-in-Chrage without any extra cost |
| 67 | S&F Mild steel mortise lock vertical type of 4 levers of size 100 mm all as specified. |
| 68 | S&F Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified. |
| 69 | S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165 |
| 70 | Supplying, fabricating and fixing of cladding for RCC column outer surface to any height,with aluminium composite panel in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick, mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over and including base frame fabricated with aluminium square pipe of size 25 mm x 20 mm x 1 mm wall thickness in 600 mm x 600 mm size grid including stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc. complete all as specified and as per Manufacturer instruction and as directedby Engineer-in-Chrage. |
| 71 | S&F roller blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per Manufacture instruction complete as per sample kept in GE’s office . Make:ista or other equivalent make approved by the GE, complete all as specified. |
| 72 | M&L for cutting holes in brick walls in cement mortar for inserting hold fasts and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required, depth of embedded portion of holdfasts measured from the face of the jamb into the wall,exceeding half brick but not exceeding one brick, complete all as specified. |
| 73 | M&L for forming jambs, etc to openings including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete in cement mortar 1:4, complete all as specified. |
| 74 | M&L for making good under cills or over arches lintels and bressummers including all pinning when necessary complete in cement mortar 1:4, complete all as specified. |
| 75 | M&L for complete removal of existing water proofing treatment of any description from roof including bedding concrete of any thickness and description and in any position including cleaning the surfaces with wire brushing, watering and removing debris up to 1500 mtr distance etc complete all as specified and directed. |
| 76 | M&L for plain cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in, levelling course mixed with integral water proofing compound as per manufacturers instructions as in roofs complete all as specified and directed. Note:- WPC shall be measured and paid seperately under relevant item. |
| 77 | M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound as per manufactures instruction on concrete surfaces of roof finished even and fair without using extra cement to recive water proofing membarane complete all as specified and directed. Note:- WPC shall be measured and paid seperately under relevant item |
| 78 | Supply only integral water proofing liquid |
| 79 | M&L for prepartion of the plastered surfaces by thoroughly removing all loose particles, dirt/ dust particles and applying a uniform coat of hot blown bitumen of grade VG-10 @ 1.20 kg/Sqm confirming to IS 702 over a coat of water based bituminous primer @ 0.40 litre / sqm and laying APP based polymeric membrane as per IS 16540-2017/ IS 16532-2017 with overlap of 100mm minimum weighing 3.6 kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/ sqm) by forced application and finally finsihed the memberance surface by applying a coat of solar refelective aluminium paint @ 0.1 litre / Sqm complete all as per Manufacturer's instructions and as specified and as directed. |
| 80 | S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified |
| 81 | S&F Unplasticised PVC pipes and fittings of 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified |
| 82 | S&F Unplasticised PVC pipes and fittings of 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified . |
| 83 | M&L for cutting chases or making holes in brick walls, not exceeding 10 cm in girth for concealed water tubing and making good the disturbed surface of wall with cement mortar 1:4 and finished as per existing complete all as specified and directed. |
| 84 | S&F in repairs Vitreous china, semi-pedestal pattern (Anglo-Indian Type) closet, white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as directed. |
| 85 | S&F in repairs PVC valve less flushing cistern syphonic action type, low level,of 10 litres capacity , inlet, ball valve, float & handle including brackets, flush pipe and all accessories complete all as specified |
| 86 | S&F in repairs of 2-in-1 chromium plated health faucet with 1.5m tube and hook complete all as specified . |
| 87 | S&F in repairs Vitreous China wash Basin (countertype type) , including brackets, CP waste coupling 32mm and waste pipe, including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed. |
| 88 | S & F in repair vitreous china urinal half stall urinal type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified and directed. |
| 89 | S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified . |
| 90 | S&F in repairs 15mm dia stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified |
| 91 | S&F in repair 15mm dia Swan neck type chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Make: Prayag CAT No : 9914 or other equivalent as approved by GE |
| 92 | S&F brass CP two way bib tap of 15mm dia chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified |
| 93 | S&F in repairs chromium plated shower roses 125mm dia with or without swivel joints any size, including fixing to steel pipe or union complete all as specified |
| 94 | S&F in repairs tubular towel rail brass chromium plated, 20mm dia, complete all as specified Make : Prayag / COMMANDER |
| 95 | S&F in repairs Stainless steel Soap dish fixed to wall all as specified . |
| 96 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified . |
| 97 | S&F PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement complete all as specified . |
| 98 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm,complete all as specified . |
| 99 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or floor, of 110 mm dia complete all as specified . |
| 100 | S&F PVC (SWR) bends 110mm dia of any radius with access door with rubber ring joints fixed to wall or floor all as specified. |
| 101 | S&F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal with rubber ring joints fixed to wall or floor all as specified. |
| 102 | S&F 75 mm bore PVC ( SWR) pipes of single socketed in any length with rubber ring joints fixed to wall or floor all as specified. |
| 103 | S&F 75 mm bore. PVC (SWR) bends with rubber ring joints fixed to wall or floor all as specified. |
| 104 | S&F for 75mm dia PVC (SWR) junction double, (double T), equal or unequal with rubber ring joints fixed to wall or floor all as specified. |
| 105 | S&F in repair 1000 litres capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed |
| 106 | S&F ball valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 25 mm bore (Minimum weight 455 gms )and fixed complete all as specified and directed. |
| 107 | S&F in repairs bevelled edge mirror of size 1500mm x 450 mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified |
| 108 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. |
| 109 | S&F mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 110 | M&L for mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated Fe 410 -W (Gde- E- 250) quality A, complete all as specified. |
| 111 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified. |
| 112 | M&L for preparation of new or previously untreated steel surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified . |
| 113 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed wih self tapping screws complete all as specified and as directed by Engineer in charge. |
| 114 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridges, hips, valley gutters of 0.50mm thick of any colour having tensile strength of 550 Mpa , fixed with self tapping screws complete all as specified and as directed by Engineer in charge. |
| 115 | S&F 6 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories fixed all as per Manufacturer's instructions complete all as specified and directed. |
| 116 | S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing , channel for louver glass etc complete all as specified. |
| 117 | S&F Anodised aluminium powder coated window and ventilator shutters, side hung type. Glazed Shutter Gauged without sash bar al section weighing 0.55 kg/m including necessary jointing cleats glazing clips rubber packing anodised al snap beading screws anodised al fittings such as peg stays 150mm long (01) Nos hinges type B21 100 mm long - 02 Nos suitable handle complete all as specified and directed. |
| 118 | S&F figured glass pin headed type 6mm thick and glazing with oil putty in squares exceeding 0.5 sqm in each pane complete all as specified. |
| 119 | S&F toughen glass 8 mm thick with diamond polished edge, clear glass including all hardware fittings and fixing of aluminium frame/SS Railing work with sealing of frame , fixed in position all as per Manufacturer instruction of make ENOX ,DORMA , OZONE, complete all as specified. |
| 120 | S&F false ceiling by using Non asbestos fiber cement building boards , manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium frame work shall be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5mm angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or other equivalent as approved by GE Note : The work shall be carried out to a height upto 12.0 m and quoted rate shall include for necessary scaffolding and ladder and other safety devices as required at site . |
| 121 | E/M PORTION : |
| 122 | Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc.,removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc.,complete all as specified and as directed. |
| 123 | M&L for point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including steel box of required module for fixing of switches/sockets and regulators all as specified complete following:- Note : Cost of terminal box and cutting chases for concealing pipes shall deemed to be included in the item rates quoted for point wiring. |
| 124 | One light point controlled by one switch. |
| 125 | One Exhaust fan point controlled by one switch. |
| 126 | One ceiling fan point controlled by one switch and regulator |
| 127 | One wall mounted fan point controlled by one switch |
| 128 | One switch socket outlet 3 pin 5 Amps on same board along with other switches |
| 129 | One switch socket outlet 3 pin 5 Amps on independent board. |
| 130 | All as per item No 121 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed. |
| 131 | S&F in replacement of modular switch 6 Amps, one way, one module complete (5 light points controlled by 1 switch) |
| 132 | S&F modular socket, 3/5 pin 6 Amps, 2 module complete |
| 133 | S&F modular Socket 6A/16A - 2/3 pin combined 2 module, |
| 134 | S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified. |
| 135 | S&F modular fan regulator step type 2 module complete |
| 136 | S&F modular white cover plate with frame 2 module complete |
| 137 | S&F modular white cover plate with frame 3 module complete |
| 138 | S&F modular white cover plate with frame 6 module complete |
| 139 | S&F modular Magnesium cover plate with overmoulded frame 12 module ( 2x 6 Module) |
| 140 | S&F sub main wiring with 2 x 4 Sqmm with PVC insulated unsheathed single core multistranded copper conductor cable ISI marked for working voltage 1100 volts grade, drawn in to and including PVC conduit and conduit accessories , including 4.0 sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to earth dolly and to be terminated and including taking down the old wiring complete all as specified and as directed. |
| 141 | M&L for cutting chases exceeding 20cm in girth for concealed water tubing or concealed conduit wiring, etc. and making good the disdurbed surfaces and facings in cement mortar 1:3 complete all as specified and directed |
| 142 | S&F in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. complete all as specified and directed Note:- Out going MCB shall be measured and paid for separately under relevant item. |
| 143 | S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.(MCB for TPN 4 DB) |
| 144 | S&F ceiling fan complete with blades, down rods, and accessories, 230V , 1200 mm sweep min air delievry 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC ) complete all as specified and as directed. |
| 145 | S&F exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver complete all as specified and as directed. |
| 146 | S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and as directed |
| 147 | Taking down the existing working ceiling fan from site and kept in safe custody and refixing the same after completion of work including testing complete all as specified and as directed. |
| 148 | Taking down unserviceable exhaust fan/ wall mounted fan of any sweep and deposite the same to AGE E/M store yard complete all as specified and as directed. |
| 149 | M&L for servicing the ceiling fan of 1200mm/1400mm sweep at site in situ by rectifying and replacing the defective ball bearing, oiling / greasing,etc as required and make the ceiling fan serviceable in all respect including painting and marking MES No complete including testing on completion all as specified and as directed by Engineer in Charge. |
| 150 | S&F Surface and wall mounted LED tube light fitting, 20 Watts , batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz including connecting up with PVC sheathed suitable copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. |
| 151 | S&F in replacement of LED building security light fitting 60W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to buildings complete all as specified and as directed. |
| 152 | S&F 240 V 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16 Amp capacity complete all as specified and as directed. |
| 153 | M&L for earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by light grade 15 mm dia GI pipe and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed. |
| 154 | S&F in replacement of LED flood light on existing poles, 210 watt capacity ,230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed |
| 155 | S&F in replacement post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 156 | S&F in replacement of PVC Cable FRLS 1.5 Sqmm 3 core multi-strand copper conductor including connections of cable from junction box up to security light on pole including provide PVC conduit for cable protection from junction box to bracket fixed with double clamps complete all as specified and as directed. |
| 157 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core x 10 sqmm complete all as specified and as directed. |
| 158 | Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core x 50 sqmm complete all as specified and as directed. |
| 159 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in any type of soil for laying cables / pipes / erection of poles etc complete all as specified and as directed. |
| 160 | Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 161 | Returning filling in soil including spreading leveling watering well ramming in layers not exceeding 25 cm each complete all as specified and as directed. |
| 162 | M&L for Sand cushioning to underground cable laid to the required thickness in trenches complete all as specified . Note :- Thickness shall be measured after punning |
| 163 | M&L for sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified |
| 164 | S&F in replacement of LED Bollard light 10Watt capacity, IP-66 , 230 Volt complete all as specified and as directed. |
| 165 | Supply and laying or fixing in replacement of 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections , one twin core 6 Sqmm cable standard conductor cable flat or circular complete all as specified and directed by Engineer- in- Charge. |
| 166 | Supply and fixing in replacement of thermoplastic outdoor cable junction box hinged / screwed door type of size 200mm x160 mm x 98 mm for 3 Phase and Nutral incoming cable, 3 Phase and Nutral outgoing cable with terminals and single Phase & Nutral connection for light fitting, 4 pole, 415 volt and one MCB SP 6-32 Amp, 240 Volt and clamp system (screw less), shock proof safe IP-55, weather proof, rust, dust and water proof internally embedded gasket with provision of metric knoc kouts for cable entry through gland suitable for 16sq mm to 25sq mm cable as required at site complete all as specified & directed |
| 167 | M&L for fabrication of outdoor type stand post with 2mm thick hood cover over top and suitable for fixing of 01 Nos 5/15 Amps switch socket combination box type fixed on flat iron strip of size 50mmx 6mm duly welded on double angle Iron 50mmx50mmx6mm not less than 60cm above ground and 30 cm below ground grouted in PCC 1:2;4 type B1 of size 300 mm x 300mm x 300 mm complete all as specified and as directed. |
| 168 | S&F in replacement of Switch socket combination 5 pin 5/15 Amps box type including PVC box, multipurpose, flush type complete all specified. |
| 169 | S&F in replacement of out door type aluminuam bus bar chamber feeder box of capacity 250 Amp , 3 phase, 4 wire, 415 Volts of size 900 mm x 600 mm x 450 mm including incommer MCCB 160 Amp 4 Pole, 36 KA of make Havells/ Siemens/ Schneider ,panel made out of 3.15 mm CRCA Sheet duly painted with two coats of synthetic enameld paint over a red oxide primer and fixed and supported with anlge iron grouted in PCC 1:2:4 type B1 upto 0.60 m high from ground level and 0.40m below the ground level complete all as specified and directed by Engineer-In-Charge. Note : Contractor shall submit the drawing of feeder box for approval before placing order. |
| 170 | S&F in repair timelite distribution boards of timelite 63 Amps 3 pole 430 Volt astronomical time switch for out door use, weather and vermin proof duly painted with synthetic enamel paint made out of 3.15mm thick CRCA sheet with locking arrangement comprising of one number time switch 24 hours operation Accuracy: quartz time base +/- 1 S per day,suitable for street light operation and duly fixed on pole with clamps / Grouting on ground complete all as specified and directed Make: Legrand ,Indo Asian or other equivalent in L&T |
| 171 | M&L for dismantling carefully existing 15 m hight mast light from platform and shifting to other place including fixing,commissioning and testing complete all as specified and as directed.Note: Foundation shall be measured and paid separately under relevant item. |
| 172 | M&L for excavation in any type of soil for fixing 15m high high mast light and fillied with RCC 1:2:4 type B1 using 20mm graded stone aggregate including necessary reinforcement 12mm to 16mm dia at required spacing as per OEM of Hight mast light Manufacturer including platform of size 2.0 m x 2.0 m x 3.0 m Including necessary form work fair finished to exposed surface.complete all as specified and as directed |
| 173 | M&L for removing the old unserviceable water light from swimming pool carefully including filling of holes with PCC 1:2:4 type B1 complete all as specified and directed. |
| 174 | S&F new generation energy saving , decorative LED COB LED as light source, 9 Watt, 230V, IP-66 complete all as specified and as directed. |
| 175 | M&L for earthing complete for transformer/ LT panel with galvanized steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, connected with and including GI strip 32mm x 6mm in and including GI pipe 40mm bore medium grade as protection pipe (from top of earth plate upto the bodty of equipment) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and comon slat 15cm thick, all around inlcuding top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300 x 300 x 300mm (top of chamber minimum 15cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-1 using 20mm graded crushed stone aggregate and angle iron frame inlcuding necessary excavation/ earth work in any type of soil/ rock and as shown in electrical plate No. 5 of SSR part-I (2009) testing on completion complete all as specified.Note: Cost of protection pipe upto 7.5 metres from earth electyrode shall be included in the unit rate quoted by the contractor. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
