|
| 1 | Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkats or frames n exc 1.5sqm each but with shutter (without taking off shutter from the frame complete all as specified and as directed . |
| 3 | Supply and fix in repair pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 4 | M &L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face 0.9mm mica with lipping/frame to match complete all as specified and as directed. |
| 5 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and as directed. |
| 6 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and as directed. |
| 7 | S & F extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed. |
| 8 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 9 | M&L mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long complete all as specified and as directed. |
| 10 | S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 11 | S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 12 | M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 13 | M & L PCC 1:3:6, type C1 (using 20 mm graded agg) coping or filling for hold fast without using extra cement complete all as specified and directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 15 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 16 | S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 18 | M&L for vitrified ceramic tile light shade 8-10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors/skirting over and including 15mm thick screed bed in CM 1:6 with epoxy coating over the bed sueface with proper adhesive jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and as directed. |
| 19 | M&L glazed coloured ceramic tiles joint free in vertical surface 450x300x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement with adhesive epoxy grout (Wellbond and Larcen Co) Adhesive 20 Kg Per bag area cover 90 Sqft, Epoxy 10 kg per packet area cover 90 Sqft fixing to new plastered surfaces (mixing with WPC) to match complete all as specified and directed. |
| 20 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. . |
| 21 | M&L PCC 1:4:8 type D2, using (40 mm graded agg) ,100 mm thick as in sub base of flooring complete all as specified and as directed. |
| 22 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm hickompacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; ® 13122C Providing and, complete all as specified and directed. |
| 23 | M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around tile complete all as specified and directed. |
| 24 | M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed. |
| 25 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and as directed. |
| 26 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth incl wpc by 3% of cement weigth without using extra cement, complete all as specfified and directed. |
| 27 | Supply only Integral water profing compound mixed with cement mortar complete all as specified and directed. |
| 28 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and as directed. |
| 29 | M&L rendering 5mm thick in CM 1:3 on ceiling finished even and smoothincl sagol finish complete all as specified and directed. |
| 30 | M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment on wall surfaces and applying two coats oil bound distemper over one coat of primer as approved (wherever required) complete all as specified and directed. |
| 32 | M & L for prepararing old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on and applying one coat of exterior weather proof paint of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Water, Alkali & Fungal resistance, dirt resistance of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. NOTE : 1. Application of Primer & emulsion to be carried out through air less spray machine (Mechanical means) and existing fittings, fixtures shall be cleaned after application of primer & emulsion. |
| 33 | M&L for preparation of newly plastered surfaces of walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 34 | Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 35 | S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 36 | S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed |
| 37 | M&L 600x450 mm beveled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer fixed as in repair complete all as specified and directed. |
| 38 | Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 39 | M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 40 | M&L for machine cut Kota stone slab flooring 20-25mm thick laid over including 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and directed |
| 41 | S&F 15mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store and cutting chases, pinning in whereever reqd and make good in cm 1:3, complete all as specified and directed. |
| 42 | S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed and cutting chases, pinning in whereever reqd and make good in cm 1:3 complete all as specified and as directed. |
| 43 | S&F in repairs 15 mm pillar taps, fancy type , cast copper alloy, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair 15 mm Bib taps, chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixing complete all as specified and directed. |
| 45 | S&F in repairs 15 mm Stop/Angle valves, cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed. |
| 46 | S&F China wash down water closet pan (Pedestal Pattern), white , pedestal pan and 'P' or 'S' trap , plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 47 | S&F in repair Vitreous China Wash Basin, white , flat back, Size 630x450mm including brackets, waste pipe , coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and as directed. |
| 48 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and as directed. |
| 49 | S&F in repair health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and as directed.. |
| 50 | S& F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outlet etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | S& F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outlet etc complete all as specified and directed. Please Enable Macros to View BoQ information |
