|
| 1 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 3 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and refixing in same opening complete all as specified and directed. |
| 4 | Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in same opening after resecuring or easing complete all as specified and directed |
| 5 | Dismantling boarding, plywood etc of any description and in any position fixed with screws etc complete all as specified & directed. |
| 6 | S&F for 2nd class hard wood, 20 mm thick boardings, planed both sides and both joints are chamfered and boarding are matched fixed with screws fixed at any situtaion / position/height complete all as specified & directed. |
| 7 | M&L for 2nd class hard wood, plain, solid, straight chowkats or frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed. |
| 8 | Cutting holes in stone masonry built in cement mortar for inserting hold fasts and making good dismantling portion in CM (1:3) or PCC (1:2:4) type B1 as required exceeding half brick but not exceeding one brick complete all as specified & directed. |
| 9 | M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 10 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts; clamps, hold fasts, wall ties; hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed |
| 11 | M&L for preparing surfaces of small steel articles such as hold fasts etc area not exceeding 0.10 Sqm each with tar or coal tar black paint complete all as specified & directed. |
| 12 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete all as directed and specified. |
| 13 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick(stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed. |
| 14 | S&F Pressed steel frames made of 1.25mm thick MS sheet for doors of size 105 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed. |
| 15 | ,--ditto-- all as per srl item No 14 above but size 165 x 60mm complete all as specified and as directed. |
| 16 | S&F Factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 17 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 18 | S&F 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed |
| 19 | S&F second class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area n.exc 3 sqcm complete all as specified and as directed |
| 20 | S&F magnetic ball catcher of approved make for cupboard complete all as specified and as directed |
| 21 | S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 22 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as secified and directed by Engineer- in -Charge |
| 23 | S&F channel for sliding drawer, of approved make in cupboard all as specified and directed by Engineer -in- Charge |
| 24 | S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 25 | S&F 30mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 26 | S&F 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed. |
| 27 | S&F 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed. |
| 28 | S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed. |
| 29 | S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 30 | S&F in repair 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 31 | M&L for prearation of new steel surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed. |
| 32 | M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 33 | M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 34 | Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed. |
| 35 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty/screwed in square n exc 0.5 sqm in each pane complete all as specified and directed |
| 36 | S&F 4.8 mm thick sheet glass, ordinarily quality and glazing with oil putty/screwed etc in square exceeding 0.50 Sqm each pane complete all as specified and directed |
| 37 | S&F in repair Door closer aluminium (extruded section body) hydraulically regulated designation No-2 universal type suitable for door shutter of 701 to 850mm in width and of weight and of weight between 36 to 60 kg as complete all as specified and as directed by Engineer in Charge. . |
| 38 | S&F in repair wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples fixed in steel door or aluminium window, size of mesh 12mm complete all as specified and directed by Engineer in charge |
| 39 | S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 40 | Taking down cement or cement lime plaster, any description on brick or stone walls, ceiling incl raking out joints hacking for key scrubbing down with water and removal of rubbish off outside complete all as specified and directed. |
| 41 | M & L for rendering 10 mm thick on brick masonary surface or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for preparation of new plastered surfaces and applying two coats of Acrylic washable distemper of approved shade/tint over a coat of primer on walls and as directed by eingineer in charge |
| 43 | M&L rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed . |
| 44 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 45 | Complete removal of existing treatment from old wall surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of putty on plastered surface and filling the surface imperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed. |
| 46 | Complete removal of existing treatment from ceiling surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on ceiling over a coat of priming paint and as directed by Engineer in charge |
| 47 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed. |
| 48 | M&L for light shade vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed. |
| 49 | M&L Glazed ceramic coloured tiles 300x200x7 mm thick on vertical surfaces such as skirting, dados and risers to step, wall etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and incl backing coat 10 mm thick in CM (1:4) complete all as specified and directed |
| 50 | M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 51 | M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 52 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 53 | M&L for 100 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring and all other similar works finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for 50mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) finished even and smooth w/out using extra cement complete all as specified and directed. |
| 55 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. |
| 56 | Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 57 | M&L for brickwork with subclass ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 58 | M&L for rendering 15 mm thick on fair faces of brick masonry surfaces or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | Dismantling of stone slab and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortar complete all as specified and directed . Please Enable Macros to View BoQ information |
| 60 | Dismantling of stone slab and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortar complete all as specified and directed . Please Enable Macros to View BoQ information |
