|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : |
| 6 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 11 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 12 | Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 13 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 |
| 14 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 15 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 16 | 10 litre (full flush) capacity-white |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 18 | Flexible pipe |
| 19 | 32 mm dia |
| 20 | Providing and fixing soil, waste and vent pipes |
| 21 | 100 mm dia |
| 22 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 23 | 75mm dia |
| 24 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 |
| 25 | Providing and fixing heel rest sanitary bend |
| 26 | 100 mm dia |
| 27 | Sand cast iron S&S as per IS - 3989 |
| 28 | Providing and fixing collar : |
| 29 | 100 mm |
| 30 | Sand cast iron S&S as per IS - 3989 |
| 31 | Sand cast iron S&S as per IS - 3989 |
| 32 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 33 | 100 mm inlet and 75 mm outlet |
| 34 | Sand cast iron S&S as per IS - 3989 |
| 35 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81 |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 37 | 32mm nominal bore |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 39 | 30 cm length |
| 40 | 15 mm nominal bore |
| 41 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 42 | Cutting holes up to 30x30 cm in walls including making good the same |
| 43 | With common burnt clay F.P.S. (non modular) brick |
| 44 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 45 | 100x100 mm size P type |
| 46 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 47 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 48 | 15 mm dia nominal bore |
| 49 | 20 mm dia nominal bore |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 51 | Providing and fixing of Bib cock with wall flange, make Jaquar of following models or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 52 | Continental Prime |
| 53 | Opal Prime |
| 54 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 55 | Continental Prime |
| 56 | Opal Prime |
| 57 | Providing and fixing of 2 inlet Single Lever Mixer ( Exposed Part ) Make Jaquar Range OPP Model 15227 KPM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 58 | Providing and fixing of concealed part of Mixer Make Jaquar Model ALD 227 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 59 | Providing and fixing Deck mounted , battery operated, sensor faucet complete in all respect Make Kerovit Model KBMST002-CP / Jaquaar Model 51445PK or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 60 | Providing and fixing Counter TOP WASH BASIN wash basin of size 600 x 400 x 160 mm , including C.P. Waste waste of make CERA / Jaquar / Kerovit complete to the satisfaction of EIC |
| 61 | Providing and fixing of Overhead shower Make Jaquar of following Model Jaquar or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 62 | Size 180 mm round Model OHS 1755 |
| 63 | Size 200 mm Square Maze OHS 1619 |
| 64 | Providing and fixing of Chinaware Urinal with integrated sensor / Electronic flushing system complete with all other fittings Make CERA Model Calcia EFS / Kerovit Klassic Walter or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 65 | Providing and fixing of Urinal partition made from 8 mm thick frosted glass of size 900 x 450 shape Rectangular / Curved complete with S.S. cleats, Make Jaquar or or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 66 | Providing and fixing Toilet Roll Holder with flap complete in all respect make Jaquar range Continental or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 67 | Providing and fixing of Automatic Lotion Dispenser of capacity 1200 ml complete in all respects make Viking Model 1110 or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 68 | Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect |
| 69 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 70 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 71 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 72 | 110 mm OD |
| 73 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 74 | Providing and fixing of drip seal joints to sand cast iron/centrifugally cas (spun) iron pipes and fittings of diameter |
| 75 | 100 mm dia |
| 76 | 75 mm dia |
| 77 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 78 | Providing and fixing of CP/SS Long Bend /short bend for OWC |
| 79 | Providing and fixing of P Trap for Basin Make Viking Model 5910 or equivalent model of other approved makes in the same price range / AOR to the satisfaction of EIC |
| 80 | Providing and fixing HCI P-Trap. Complete in all respect |
| 81 | Providing and fixing Tank Nipple complete in all respect |
| 82 | 32 mm Please Enable Macros to View BoQ information |
