|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.(DSR 15.12.1) |
| 2 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within50 metres lead.(DSR 15.26) |
| 3 | Demolishing mud phaska in terracing and disposal of material within50 metres lead (DSR 15.27) |
| 4 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase (DSR 12.21.1) |
| 5 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR 12.22) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.4) |
| 7 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge (booth market mauli complex).(DSR 11.56.1) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm (DSR 8.2.2.2) |
| 9 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in allcolours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete. Make kajaria, orient bell (DSR 8.31) |
| 10 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of size as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shade complete. Make: Spenza, Johnson& johnson, kajaria, Cera etc. (DSR 11.37 A) |
| 11 | Providing and laying tactile tile (for vision impaired persons as per standards) of size300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR 16.90) |
| 12 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade.Old work (one or more coats) (DSR 13.90.1) |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete (DSR 13.80) |
| 14 | Finishing walls with textured exterior paint of required shade. Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.(DSR 13.110.1) |
| 15 | Providing and fixing grabe rail of stainless steel pipe 1¼\\" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge.(NSI) For disable person.(NSI) |
| 16 | Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and makinggood the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single. 15 mm C.P. brass pillar tap (DSR 17.7.4) |
| 18 | Providing and fixing of Urinal Partition 10mm thick Toughned Glass frosted both sides of size 3x1.5 fixed in position with clamps holdings the glass. All exposed edges to be grined with smooth finish to the entire satisfaction of Engineer in charge including carriage of materials to site of work (NSI) |
| 19 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(DSR 17.3.1) |
| 20 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern (DSR 17.4.1) |
| 21 | Providing and fixing CP brass auto closing concealed urinal press matic taps complete in all respect as per the entire satiusfaction of Engineer in charge (NSI) |
| 22 | Providing and fixing brass stop cock of approved quality . 15 mm nominal bore (DSR 18.16.1) |
| 23 | Providing and fixing of CP stainless steel bib cock, Pressmatic Taps of approved make complete in all respect as per the entire satiusfaction of Engineer in charge (NSI) |
| 24 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (DSR 17.71) |
| 25 | Providing and Fixing Toilet paper holder: (DSR 17.34.1) |
| 26 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore (DSR 18.11.1) |
| 27 | Providing and fixing soil, waste and vent pipes : 100 mm dia (DSR 17.35.1.1) |
| 28 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete .25 mm nominal bore (DSR 18.18.3) |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( DSR 18.48) |
| 30 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (DSR 18.53A) |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (DSR 17.28.1) |
| 32 | Providing and fixing of exhaust fan of 12\\" of reputed make with metallic blades make of Crompton/Bajaj heavy duty complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 33 | Providing and fixing of ceiling fan of 48\\" of reputed make of Usha/Crompton/ Khaitan complete in all respect as per the satisfaction of Engineer in charge. (NSI) |
| 34 | Providing and fixing of tubelight 4', 1x40 watt type Usha/ Havells/ Philpis complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 35 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.( 1.3.1) (Group A) |
| 36 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch (1.23.1) |
| 37 | Providing and fixing of 50 Watt LED Flood light with bracket outside on the wall complete in all respect as per the entire satisfaction of Engineer in Charge .(NSI) |
| 38 | Providing and installation of sanitary napkin vending machines with sanitary napkin pad (1 Box = 200 pads). The cost include basic cost of equipment, taxes, delivery charges, training charges & warranty of 12 months complete in all respect. .(NSI) |
| 39 | Providing and installation of sanitary napkin incinerator for the disposal of sanitary napkin pads of approved quality complete in all respect as per the entire satisfaction of Engineer in Charge .(NSI) |
| 40 | Providing and placing Round shape plastic flower POT (Gamla) size 12\\" dia Green in colour including decorative plant for outdoor decoration .(NSI) |
| 41 | Providing and placing HDPE waste cantainer for wet and dry waste of capacity 20 Ltr with foot pedestal operated opening lid .(NSI) |
| 42 | Providing and fixing of MS Gate of suitable size with 2 mm thickness MS sheet supported by 25 X 5 mm MS flat and angle of size 35 X 35 X 5 mm with frame angle 40 X 40 X 5 mm including provision of dead lock complete in all respect as per satisfaction of EIC. .(NSI) |
| 43 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 250x10 mm (DSR 9.97.2) |
| 44 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (DSR 9.100.1) |
| 45 | Repair of electrical wiring of toilet blocks including cost of replacement of defective switch and sockets ,wiring etc. complete in all respects.(NSI) |
| 46 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparingthe surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.(14.13) |
| 47 | Providing and fixing of tile terracing with (0’-9” x 0’-3”) tiles laid in cement sand motor 1:4 in first storey upto 4 Mtr. Above plinth level complete in all respect..(NSI) |
| 48 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250X16mm. (9.62) |
| 49 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 125 mm.(9.63) |
| 50 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight but hinges with necessary screws etc. complete : 100x75x3.50 mm(9.56.2). |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.(DSR 14.54.1) |
| 52 | Providing and fixing sign board made of fiber /PVC sheet with writing of PT's complete in all respects(NSI) |
| 53 | Providing and fixing of laminated sun board of different size showing matter relates to Swacch Survekshan, Swacch toilet, SBM etc. as per direction of EIC. 36\\" x 24\\" (15 nos X3=45)..(NSI) |
| 54 | 18' x 12\\" |
| 55 | Gents, Ladies, Child friendly and physically handicaped boards etc. |
| 56 | Providing and fixing of M.S direction board/sign board of rectangular size 457mm X 305mm,14 gauge thicknss plate welded with stand post made of angle 25 X25 height 4' including cost of cutting ,freight charges ,apply of primmimng coat of approved primer ,print and labour various toilet blocks written letter (Public Toilet ) in white colour complete in all respects (NSI) |
| 57 | Providing and fixing of dustbin of standard size of sufficient capacity. .(NSI) |
| 58 | Credit against old material Please Enable Macros to View BoQ information |
