|
| 1 | Providing, lowering, laying and jointing in trenches, standard lengths pipes ISI marked piped as per IS 4984-1995 (amended up to date) with necessary jointing material like mechanical connectors i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipes by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ un loading charges, stacking of pipes, including cost of labour and material, specials (Tee, Band etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specification and direction of Engineer in charge of following class and disameter.(Excluding earth work)Note: Providing and fixing of all requisite specials as per drawing design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply up to 110 mm dia, in coil and above 110 dia straight length in 6 M PE-80 PN-6 |
| 2 | 75 mm dia |
| 3 | 90 mm dia |
| 4 | 110 mm dia |
| 5 | 125 mm dia |
| 6 | 140 mm dia |
| 7 | 160mm dia |
| 8 | 180 mm dia |
| 9 | 200 mm dia |
| 10 | Providing, lowering, laying and jointing in trenches, standard lengths pipes ISI marked piped as per IS 4984-1995 (amended up to date) with necessary jointing material like mechanical connectors i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipes by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ un loading charges, stacking of pipes, including cost of labour and material, specials (Tee, Band etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specification and direction of Engineer in charge of following class and disameter.(Excluding earth work)Note: Providing and fixing of all requisite specials as per drawing design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply up to 110 mm dia, in coil. PE-80 PN-10 |
| 11 | 90 mm dia |
| 12 | 110 mm dia |
| 13 | 125 mm dia |
| 14 | 140 mm dia |
| 15 | 160 mm dia |
| 16 | 180 mm dia |
| 17 | 200 mm dia |
| 18 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil |
| 19 | Add extra for trenches for every additional lift over item no 4.1 |
| 20 | Above 1.5 mtr and up to 3.0 mtr. |
| 21 | Above 3.0 mtr and up to 4.5 mtr. |
| 22 | Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. |
| 23 | Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. |
| 24 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0 |
| 25 | 80 mm HW |
| 26 | 100 mm HW |
| 27 | 125 mm HW |
| 28 | 150 mm HW |
| 29 | 200 mm HW |
| 30 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 |
| 31 | 80 mm dia |
| 32 | 100 mm dia. |
| 33 | 125 mm dia. |
| 34 | 150 mm dia. |
| 35 | 200 mm dia. Please Enable Macros to View BoQ information |
