|
| 1 | M& L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm including depositing the surplus soil along the line of pipe/ cable in the form of heap, complete all as specified and as directed. |
| 3 | Removing of surplus excavated soil to a distance not less than 50m complete all as specified and directed. |
| 4 | S&F of 25 mm dia galvanised steel tubes, 'medium grade', with all fitting; fixed to walls and ceilings or laid in floors, including taking down the existing old unserviceable GI pipe and testing, complete all as specified and as directed. |
| 5 | All as per Item No. 4.00 here-in-above, but for 20mm dia GI pipe, including taking down the existing old unserviceable GI pipe and testing, complete all as specified and as directed. |
| 6 | S&F of 40 mm dia galvanised steel tubes, 'medium grade', with all fitting; fixed to walls and ceilings or laid in floors, including taking down the existing old unserviceable GI pipe and testing, complete all as specified and as directed. |
| 7 | S&F of 50 mm dia galvanised steel tubes, 'medium grade', with all fitting; fixed to walls and ceilings or laid in floors, including taking down the existing old unserviceable G1 pipe and testing complete all as specified and directed. |
| 8 | S&F Gunmetal gate valve of size 20mm dia including taking out old UNSV one complete all as specified and directed. |
| 9 | S&F Gunmetal gate valve of size 25mm dia including taking out old UNSV one complete all as specified and directed. |
| 10 | S&F Gunmetal gate valve of size 40mm dia including taking out old UNSV one complete all as specified and directed. |
| 11 | S&F Gunmetal gate valve of size 50mm dia including taking out old UNSV one complete all as specified and directed. |
| 12 | Supply & Fixing, jointing and testing of cast iron sluice Valve pn1.6 ISI mark of size 80 mm bore (Internal Dia) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets including taking out old unserviceable sluice valves, complete all as specified and as directed. |
| 13 | M&L for DI fittings incl rubber joints of suitable size for DI pipe flange/ spigot and socket of size 80 mm to 350 mm bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and as directed. |
| 14 | M&L for construction of Brick Masonry Valve Pit, of size 1200mm X 1200mm X 1200mm (Internal dimension), one Brick thick wall in cement mortar 1:4 on 150mm thick PCC 1:4:8, type D-2 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally upto full depth and externally upto 150mm below GL, providing 4 mm thick MS sheet valve Pit Cover, welded with 40X6mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 50 x 50 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Synthetic enamel Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 15 | M&L for construction of Brick Masonry Valve Pit, of size 1200mm X 1200mm X 1200mm (Internal dimension), one Brick thick wall in cement mortar 1:4 on 150mm thick PCC 1:4:8, type D-2 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally upto full depth and externally upto 150mm below GL, providing 4 mm thick MS sheet valve Pit Cover, welded with 40X6mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 50 x 50 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Synthetic enamel Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit, complete all as specified and as directed. Please Enable Macros to View BoQ information |
