|
| 1 | 33KV DPWPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.) |
| 2 | Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 3 mtr., 2 no's channel required =( 2x9.56x3) |
| 3 | Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280) |
| 4 | Insulator Support Channel for 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 1 no's channel required =( 7.14x4.3 x1) |
| 5 | isolator Support Channel for 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 2 no's channel required =( 7.14x4.3 x2) |
| 6 | Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 3.0 Mtr., 4 no's channel required =( 7.14x3x4) |
| 7 | 50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4) |
| 8 | Isolator operating Down Pipe Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 7.14x0.8 x1) |
| 9 | Down Pipe Diagonal support Angle (GI) ,4.5 kg,/mtr, each angle (GI) length 0.388 mtr, 1 No angle required (GI) , ( 1*4.5*0.388) |
| 10 | Down Pipe base support Angle (GI) ,4.5 kg,/mtr, each angle (GI) length 0.34 mtr, 1 No angle required (GI) , ( 1*4.5*0.340) |
| 11 | Isolator support side channel (GI) 100X50X6mm,9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 9.56x2x0.5) |
| 12 | Danger Plate, 2 no's. |
| 13 | Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510) |
| 14 | H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair) |
| 15 | H.T. Stay set (Complete ) |
| 16 | H.T. Stay Insulator Type-C |
| 17 | 7/10 SWG Stay Wire 15kg /stay |
| 18 | Gi Pipe Earthing 40mm. 3 Mtr. Long |
| 19 | 50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L.A, 3 Mtr for AB Switch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36 |
| 20 | GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg) |
| 21 | Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510) |
| 22 | Lightning Arrester(12KV,10KA) (Station Class,class-2) |
| 23 | 33KV 1250 AMP Double break (Turn,& Twist centre rotating ) isolator without earth switch with PI (polymer)) |
| 24 | 33KV pin insulator polymer |
| 25 | H W fitting(B&S) 90KN, 4Bolt |
| 26 | Disc insulator (B&S) 90 KN polymer |
| 27 | Wedge connector for 148 sqmm AAA conductor |
| 28 | Paddle clamp for wedge connector of 148 sq mm AAA conductor |
| 29 | GI Nut , Bolt & Washer of different sizes (13.718 Kg each DP with AB Switch) |
| 30 | Polycarbonate bird guard |
| 31 | Black Paint |
| 32 | Yellow Colour Paint for Background |
| 33 | Civil and servicesFixing of complete 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard. |
| 34 | Concreting ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.45Cu.mtr |
| 35 | Couping ratio 1:1.5:3 with dimension ( 500X500X450)= 0.1125 Cu mtr |
| 36 | Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe . |
| 37 | 33kV 3C, 400sqmm UG Cable Supply of 33kV, 3Core, 400sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 37.7kA and SC rating of Armour in kA-20kA) |
| 38 | Supply of Straight through jointing kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, aluminium UG Cable kits |
| 39 | Supply of Outdoor termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, HT UG Cable kits |
| 40 | Supply of indoor termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, HT UG Cable kits(Touch proof) |
| 41 | Supply of indoor termination kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, HT UG Cable kits(Touch proof) |
| 42 | Supply of materials for High Density Polyethelene (HDPE) pipe 200mm diameter, PE 80- PN8 for laying of 33kV UG cable |
| 43 | Supply of RMU 33KV 630A single BKR module |
| 44 | EarthingEarthing Conductor : 50X6 mm (2.4kg /mtr) flat (GI) for equipments structure etc. |
| 45 | Pipe Earthing 40 mm GI pipe |
| 46 | ERECTIONLaying, Commissioning & Testing of 33kV, 3Core, 400sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method. |
| 47 | Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, aluminium UG Cable kits |
| 48 | Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, aluminium UG Cable kits |
| 49 | Laying of 200mm dia PE 80-PN8, HDPE pipe inside open trench. |
| 50 | Erection of RMU 33 KV 630A single BKR MODULE + AUXPT |
| 51 | Civil workEarth work excavation of soil |
| 52 | Earth work excavation of hard rock |
| 53 | Back filling with excavated soil outside and above the trench |
| 54 | Damage of asphalt/tar road and other utilities and reconstructing to bring to its original shape after laying of cable in open trench (1mtr. width) |
| 55 | Prefabricated RCC foundation of 33kV RMU |
| 56 | SITC of GI Fencing with Gate around each RMU |
| 57 | Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe . |
| 58 | Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.) |
| 59 | Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works |
| 60 | 11kV 3C, 300sqmm UG Cable Supply of 11kV, 3Core, 300sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 28.3kA and SC rating of Armour in kA-15kA) |
| 61 | Supply of Straight through jointing kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, aluminium UG Cable kits |
| 62 | Supply of indoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, HT UG Cable kits(Touch proof) |
| 63 | Supply of outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, HT UG Cable kits(Touch proof) |
| 64 | Supply of materials for High Density Polyethelene (HDPE) pipe 160mm diameter, PE 80- PN8 for laying of 11kV UG cable |
| 65 | Supply of RMU 11KV 3 way 630 A (LLV(2iso+1 BKR +AUXPT) )) |
| 66 | EarthingEarthing Conductor : 50X6 mm (2.4kg /mtr) flat (GI) for equipments structure etc. |
| 67 | Pipe Earthing 40 mm GI pipe |
| 68 | ERECTION Laying, Commissioning & Testing of 11kV, 3Core, 300sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method. |
| 69 | Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, aluminium UG Cable kits |
| 70 | Laying of 200mm dia PE 80-PN8, HDPE pipe inside open trench. |
| 71 | Erection of RMU 11KV 3 way 630 A (LLV(2iso+1 BKR +AUXPT) )) |
| 72 | Civil worksEarth work excavation of soil |
| 73 | Earth work excavation of hard rock |
| 74 | Back filling with excavated soil outside and above the trench |
| 75 | Prefabricated RCC foundation of 11kV RMU |
| 76 | SITC of GI Fencing with Gate around each RMU |
| 77 | Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe . |
| 78 | Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.) |
| 79 | Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works |
| 80 | 11kV 3C, 95sqmm UG Cable Supply of 11kV, 3Core, 95sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 9kA and SC rating of Armour in kA-9kA) |
| 81 | Supply of indoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, HT UG Cable kits(Touch proof) |
| 82 | Supply of outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, HT UG Cable kits(Touch proof) |
| 83 | Supply of materials for High Density Polyethelene (HDPE) pipe 160mm diameter, PE 80- PN8 for laying of 11kV UG cable |
| 84 | ERECTION Laying, Commissioning & Testing of 11kV, 3Core, 95sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method. |
| 85 | Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, aluminium UG Cable kits |
| 86 | Laying of 160mm dia PE 80-PN8, HDPE pipe inside open trench. |
| 87 | Civil workEarth work excavation of soil |
| 88 | Earth work excavation of hard rock |
| 89 | Back filling with excavated soil outside and above the trench |
| 90 | Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.) |
| 91 | Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works |
| 92 | 11kv DPWPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) |
| 93 | Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 3 mtr., 2 no's channel required =( 2x9.56x3) |
| 94 | Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280) |
| 95 | AB switch Mounting Channel 75X40X4.8mm, 7.14KG/Mtr, each channel length 3 Mtr., 2 no's channel required =( 7.14x3x2) |
| 96 | AB Switch Side Support Channel 100X50X6mm,9.56 KG/Mtr., each channel length 0.35 mtr., 2 no's channel required =( 9.56x2x0.35) |
| 97 | Channel Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 7.14x0.8x1) |
| 98 | Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 3.0 Mtr., 4 no's channel required =( 7.14x3x4) |
| 99 | 50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4) |
| 100 | Danger Plate, 2 no's. |
| 101 | Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510) |
| 102 | H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair) |
| 103 | H.T. Stay set (Complete ) |
| 104 | H.T. Stay Insulator Type-C |
| 105 | 7/10 SWG Stay Wire 15kg /stay |
| 106 | Gi Pipe Earthing 40mm. 3 Mtr. Long |
| 107 | 50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L.A, 3 Mtr for AB Switch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36 |
| 108 | GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg) |
| 109 | Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510) |
| 110 | Lightning Arrester(12KV,10KA) (Station Class,class-2) |
| 111 | AB Switch (11KV,400A.3pole,50Hz) |
| 112 | 11 KV pin insulator polymer |
| 113 | H W fitting(B&S) 70KN, 3Bolt |
| 114 | Disc insulator (B&S) 70 KN polymer |
| 115 | Wedge connector for 100 sqmm AAA conductor |
| 116 | Polycarbonate bird guard |
| 117 | GI Nut , Bolt & Washer of different sizes (13.718 Kg each DP with AB Switch) |
| 118 | Black Paint |
| 119 | Yellow Colour Paint for Background |
| 120 | Civil and servicesFixing of complete 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard. |
| 121 | Concreting ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.45Cu.mtr |
| 122 | Couping ratio 1:1.5:3 with dimension ( 500X500X450)= 0.1125 Cu mtr |
| 123 | Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe . |
| 124 | Installation , Tesitng & Comissioning of 11KV auto reclosure unit on existing structure as per TPCODL specification including loasing unloasing shifting / transporation form site / tant |
| 125 | 1.1 kv LT 4C X95 sqmm XLPE U/G cableSupply of 1.1 KV 4C X95 sqmm XLPE insulation armoured - almunium U/G cable open trench |
| 126 | Supply of (HDPE) pipe 110mm diameter, PE 80- PN8 |
| 127 | ERECTION Laying of 1.1 KV 4C X95 sqmm XLPE insulation armoured - almunium U/G cable |
| 128 | Laying of (HDPE) pipe 110mm diameter, PE 80- PN8 |
| 129 | Supply and erection of double Compression Flameproof Type Glanding for armoured Cable 3.5/4C 50-95 sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly supply to be done as per TOCODL sepc and approved make |
| 130 | Civil workEarth work excavation of soil |
| 131 | Earth work excavation of hard rock |
| 132 | Back filling with excavated soil outside and above the trench |
| 133 | 11kv cutpoint with 180 degree angle9 Mtr. long 300 Kg. PSC Pole |
| 134 | LT Stay set Complete |
| 135 | Straight Cross Arm 100X50X6mm, 9.56 KG/Mtr., each channel length 1.2 mtr., 2 no's channel required =( 2x9.56x1.2) |
| 136 | Danger Plate, 1 no's. |
| 137 | Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510) |
| 138 | GI barbed wire anticlimbing device 3 Kg. Per support |
| 139 | Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510) |
| 140 | Earthing of Support ( Coil Type ) |
| 141 | GI Nut , Bolt & Washer of different sizes (3.55 Kg each Cut Pole) |
| 142 | Black Paint |
| 143 | Yellow Colour Paint for Background |
| 144 | CIVIL and Service WorksConcreting ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375 Cu.mtr per pole |
| 145 | Dismantling Portion Dismentling of 11/13 mtr Joist /WPB pole 150X150MM / 160X160MM |
| 146 | Dismentling of 11/13 mtr Joist /WPB pole 150X150MM / 116x100 MM |
| 147 | Dismentling of 9/8 Mtr PCC/ Joist Pole |
| 148 | Dismentling of existing auto reclouser |
| 149 | Dismentling of ACSR /AAAC 34/ 55mm2 form overhead line |
| 150 | Dismentling of ACSR /AAAC 148/ 232mm2 form overhead line |
| 151 | Dismentling of Various size LT AB CABLEN:B:. Salvage value amounting to Rs.1,16,676.38 to br drductrd from the contractor's bill. Please Enable Macros to View BoQ information |
