|
| 1 | Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Supplying and filling in foundation and basement with M sand in layers of not more than 15cm.thick well rammed watered and compactedetc., complete complying with standard specification. |
| 3 | Providing and laying Plain Cement concrete 1:5:10 (one cement Five M sand & Ten HBGS jelly) using 40mm HBGS jelly including dewatering by bailing/pumping wherever necessary laying the concrete in layers not more than 15 cm thick and in bays with all leads and lifts, compacting and finishing the surface, watering, curing etc.,complete complying with standard specifications and as directed by the departmental officers for Foundation works. |
| 4 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener,side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 5 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 6 | Plane surfaces such as RCC , roof slab, lintels & bed blocks |
| 7 | Curve shape Kodungai slab |
| 8 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 9 | Square Column BGL |
| 10 | Providing additional strutting to for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs etc. for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 5.50 metre height from floor level using Steel Adjustable Telescopic Props of Size 3.0 x 3.0m made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c and with Cross bracings provided at two levels at a spacing of 1.80m etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. |
| 11 | Providing and laying in position, standardised Reinforced cement concrete Mix M-25 Grade(Design mix) in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with above (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing,etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Below Ground Level |
| 13 | Below GL 1.50m to 4.50m |
| 14 | Above Ground Level |
| 15 | From 3.29- 6.58m |
| 16 | From 6.58 - 7.50m |
| 17 | Supply and fabricating of steel required for all RCC works involced in the schedule including cost of steel ,cost of fabrication,labour charges for cleaning the rods straightening, cutting, bending,tying grills including over lapping to the required length wheenever necessary and placing reinforcement in position as specified in the drawing including cost of binding wire provision for spacer bar cover blocks and all other incidental charges etc., directed by the departmental officers. |
| 18 | Paving the floor with best quality Double vitrified Tiles of size 600x600 x10mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 19 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 20 | Supplying, and fixing M.S. GRILLS for doors, windows and ventilators etc, using necessary flats for inner and outer members which should be fixed or welded to masonry or column including necessary dismantling or making holes and redoing the same to original condition as directed by the departmenta officers inclusive of cost of providing one coat of best quality red oxide primer completre complying with standard specifications. |
| 21 | Special ceiling plastering and finishing the exposed surfaces of RCC work such as RCC slabs, sunshades, facia, canopy slab, staircase. Waist slab landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking and providing necessary cement mortar nosing, beading etc., wherever necessary and as directed with the same cement mortar etc., complete |
| 22 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors complying with standard specifications and as directed by the departmental officers. |
| 23 | Brick masonry in C.m 1:4 using stock bricks including all varivargams, moulds, sthambams, mukapathrams,koodu, Nasi and all ornamental brick work complete, all pancharams, Agarais, karnakoodus etc., forming core walls of Rajagopuram / Vimanams complete including cost and conveyance of all materials including cement all the labour charges including marking pathies shaping of the bricks, including lifting of all the materials to required heights, curing and all extra for working in heights etc, complete.100 cft |
| 24 | Height Up to 15 feet |
| 25 | Height Up to 25 feet |
| 26 | Providing vargapoochu over the core walls of Vimanams/Gopurams, with Cement martor.1:4 complete including shaping the mukhapathram, mahannasi,koodu all arnamental works to proper shape, by embedding broken bricks or shaped/chiselled bricks, rough - plastering with Cement martor.1:4 and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials labour therefore, lifting of materials, all woeking in heights curing with water etc, complete - including all extra for folding and including clearing the debris from the vimanams/ Gopurams - Upto 15'0\\" height |
| 27 | Height Up to 15 feet |
| 28 | Height Up to 25 feet |
| 29 | Paving the Top of roof with Solar refelective ceramic tiles of approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 30 | Supplying and fixing best Qulality CW Scantlings ( below 3m in length) - Malabar wood used in door frame including Labour wrought and put up in position of frames inclusive of fixing holdfasts for doors, etc. The teak wood should be got approved from the Executive Engineer before useon work.complete complying with standard specification |
| 31 | Maufacturing supplying and fixing in position solid core medium density Fibre board ( Exterior grade) FLUSH SHUTTERS of nominal thickness of 35mm single or double shuutters of any size, conforming to I.S. 12406 with necessary rebate cutting, external lipping all round with Teakwood and including cost of required Aluminium anodized furniture fittings with I.S.I. mark, wind appliances, labour charges, fixing the furniture fittings with necessary aluminium or choromium plated screws and the shutters fixed to frame in position etc., complete . |
| 32 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 33 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 34 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 35 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work . |
| 36 | Supplying ang fixing steel Two Leafe Gate using Best Quality L angle, 16mm square rod , 5mm tk steel flats & Design moulding works etc All steel members should be one coat of best Qulality of perimer coat. and two coats of best Emelsion paint The cost includes cost of all materials, process charges like gas cutting, welding, machining, scaffolding charges, labour charges, loading, lifting, unloading, transport, erection, , conveyance to site and clearing them after completion of work complete and as directed by the departmental officerscomplete complying with standard specification. |
| 37 | Painting new iron works such as steel steel members& window Grill works with one coat of red oxide priming coat and two coats of best approved first quality and colour of synthetic enamel paint in all floors complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works. |
| 38 | Sub Total |
| 39 | GST @ 18% Please Enable Macros to View BoQ information |
