|
| 1 | Civil Maintenance works in Phosphate plants, DCS control room, Lab, SCT & Substation areas within Fertilizer plants at FACT UC. |
| 2 | Dismantling and removing carefully the existing brick/rubble/laterite masonry in cement mortar at all levels and conveying and depositing the debris and stacking the serviceable material at places pointed out within a distance of 150M |
| 3 | Chipping and removing portions of existing RCC work carefully without damaging the remaining structure and removing the debris at places pointed out within a distance of 150M. |
| 4 | Dismantling and removing doors with or without ventilators, including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed. |
| 5 | Dismantling and removing windows with or without ventilators including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed. |
| 6 | Dismantling and removing ventilators including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed. |
| 7 | Taking down shutters of doors, windows or ventilators including removal of hinges and all other fittings and stacking materials in Carpentry shop or MCD office. |
| 8 | Dismantling and removing the existing CC/RCC works and conveying and depositing the debris at places pointed out within a distance of 150M as directed by Engineer-in-charge |
| 9 | Demolishing and removing old cement plaster and disposal of the debris at places pointed out within a distance of 150M. |
| 10 | Chipping concrete flooring closely including clearing the surface well for replastering. |
| 11 | Earth work excavation in all classes of soil except hard rock requiring blasting for foundation trenches, drains, column footings, equipment foundations etc. not exceeding 1.5m in width or 10sq.m on plan.in all classes of soil except hard rock requiring blasting including filling in basement and sides of foundation with the spoil earth in layers,breaking clods, watering, ramming and consolidating and conveying and depositing the excess spoil or filling in low lying area and levelling within an initial lead of 50M and lift upto 1.5M, etc.complete . |
| 12 | Earth work open excavation in all classes of soil except hard rock requiring blasting for foundation etc., exceeding 1.5m in width as well as 10sq.m on plan including back filling / and /or depositing on bank in layers with initial lead upto 50m and lift upto 1.5m, breaking clods, watering, ramming and sectioning of spoil bank etc.complete. |
| 13 | Extra for every additional lift on 1.5m or part there of over initial lift. |
| 14 | Extra for conveyance of spoil earth to places beyond the initial lead of 50m specified under earth work by manual load- per lead of 50m or part there of . |
| 15 | Earth work filling by conveying earth from a distance of 100m and putting in layers of 150mm thick and consolidating well. |
| 16 | Random rubble masonry in cement mortar 1:5 for foundation and basement. |
| 17 | Random rubble masonry in cement mortar 1:5 with departmental rubble for foundation and basement. |
| 18 | Rough stone dry packing for revetment and apron. |
| 19 | Brick work in cement mortar 1:5 with country burnt bricks ( 21 x 10 x 6.5 Cm or nearest size) for foundation and basement. |
| 20 | Brick work in cement mortar 1:5 with country burnt bricks ( 21 x 10 x 6.5 Cm or nearest size) for super structure upto 5M height from the plinth level. |
| 21 | Extra rate payable over and above for carrying out brick/hollow block work for every additional 5m height on successive floor |
| 22 | Add to items of brick work in corresponding heights extra labour for coping,open parapets,ornamental cornice,oval type drains,well lining etc. |
| 23 | Honey comb brick work with first class table moulded country burnt bricks half brick thick in CM 1:3 for superstructure walls in ground floor /upto 5m ht.from plinth level/floor level. |
| 24 | Honey comb Brick work full brick thick with first class traditional wire cut bricks in CM 1:3 for superstructures in ground floor /upto 5m ht.from plinth level/floor level. |
| 25 | Supplying and stacking good quality cut gravel for measurement. |
| 26 | RCC or CC work 1:2:4 mix, using 20mm nominal size broken stone excluding cost of form work and reinforcement. |
| 27 | Extra lift and labour for RCC work for beams, lintels, slabs, sunshades and sun breakers in first floor and successive floors upto 5m height in each floor. |
| 28 | Extra for concreting RCC columns. |
| 29 | Extra lift and labour for RCC work for columns in first floor and successive floors upto 5m height in each floor. |
| 30 | Cement concrete work in 1:2:4 mix with 66.67% 40mm broken stone and 33.33% 20mm broken stone for concreting road ways excluding cost of formwork. |
| 31 | RCC work 1:1 1/2:3 nominal mix using first class 20mm and down grade hard granite broken stones including all charges for mixing, laying, consolidating, curing, handling and fixing in position, etc. complete but excluding cost of formwork and reinforcement for foundation footing, bottom and sides of trench, raft, plinth beams and pedestal over foundation footing of all shapes pile caps and mass concrete |
| 32 | Cement concrete work in 1:3:6 mix using 40mm nominal size hard granite broken stones including all charges for mixing concrete, laying, consolidating, curing etc. complete but excluding cost of form work. |
| 33 | Cement concrete work in 1:4:8 mix using first class 40mm nominal size hard granite broken stones including all charges for mixing concrete, laying, consolidating, curing etc. complete foundation/levelling course, flooring etc complete but excluding cost of form work. |
| 34 | Providing reinforcement to RCC works at all levels with MS or deformed bars including all charges for uncoiling and straightening rods, cutting rods, bending cold, placing in position and tying with tying wire of suitable gauge etc.complete.( Only Reinforcement Rods will be issued free of cost by the company ) |
| 35 | Providing form work to RCC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for slabs including sloping ones with connected curbs, if any and stair cases coming upto 5m height from plinth level or floor level in ground floor- straight sided. |
| 36 | Providing form work to Cement Concrete and RCC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for beams, sunshades, lintels, fins, facias and walls upto 5m height from plinth level or floor level /in ground floor- straight sided. |
| 37 | Providing form work to RCC / CC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for foundation footings, machine equipment foundations and pedastals over foundation footings, sides of trench walls, plinth beams and rafts, pile caps and mass concrete works etc.at all levels inside factory area. |
| 38 | Providing form work to RCC / CC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for columns, straight sided with connected brackets if any coming from top of foundation footings and upto 5m height from plinth level or floor level in ground floor. |
| 39 | Extra lift and labour for RCC work for slabs in first floor and successive floors upto 5m height in each floor. |
| 40 | Extra lift and labour for lintels, sunshades, fins, facias and wall. |
| 41 | Extra lift and labour for columns. |
| 42 | Supplying anjily wood scantlings of required sizes at work sites as directed. |
| 43 | Supplying hard country wood scantlings of required sizes at work sites as directed. |
| 44 | Supplying and providing Anjily wood work wrought and put up in roof members , ceiling joists etc.. |
| 45 | Supplying and providing first class and well seasoned teak wood planed and framed work for frames of doors, windows, ventilators, partition work etc. including shaping to design as per drawings / instructions fixing in position the frames to lines and levels etc complete at all levels. |
| 46 | Supplying and providing first class and well seasoned hard country wood of approved quality planed and framed work for frames of doors, windows, ventilators, partition work etc. including shaping to design as per drawings / instructions fixing in position the frames to lines and levels etc complete at all levels. |
| 47 | Supplying and providing first class and well seasoned anjily wood planed and framed work for frames of doors, windows, ventilators, partition work etc. including shaping to design as per drawings / instructions fixing in position the frames to lines and levels etc complete at all levels. |
| 48 | Labour for wood work planed and framed work with departmental scantlings. |
| 49 | Labour charges for fabricating panelled / glazed shutters to suit the frames already fixed, inclusive of labour charges for fixing all necessary fittings but excluding cost of fittings etc. complete at all levels. |
| 50 | Providing 3mm thick plain glass for glazing of shutters, partition etc. with teak wood fillet, putty etc. on new work / replacing of broken glass panes in existing shutters etc including dismantling the broken glasses,if any. |
| 51 | Fixing doors/ windows/ ventilators,frames in position including fixing hold fasts etc. (Labour only) |
| 52 | Fixing fabricated / repaired doors / windows/ ventilator shutters to existing frames with all necessary hard ware fittings at all levels.(labour only) |
| 53 | Chipping holes in rubble/brick/laterite masonry walls not exceeding 1dm3 |
| 54 | Chipping and fixing wooden plugs in walls by cement grouting etc. as per direction (labour only) |
| 55 | Providing ceiling with 4mm thick AC plain sheet /3mm thick Plywood sheet screwed on the under side of frame work already provided including providing beeding with 40 x 16mm anjili wood reepers as per instructions(Sheet will be supplied by the Company) |
| 56 | Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels. |
| 57 | Finishing cement plastered surfaces integrally at all heights , with a neat flushing coat of cement. |
| 58 | Plastering with cement mortar 1:4, 15mm thick, one coat floated hard and trowelled smooth at all levels. |
| 59 | Plastering with cement mortar 1:4 for an average thickness of 20mm one coat, floated hard and trowelled smooth at all levels for finishing top of CC floors, rough faces of brick work, surfaces of rubble masonry etc. |
| 60 | Pointing to the joints of acid proof tiles/ bricks using acid proof mortar supplied by the company including raking out old mortar from the joints etc complete. |
| 61 | Pointing to random rubble or laterite masonry with cement mortar 1:3 including lining the joints at all heights |
| 62 | Collecting waste materials, debris, spoil earth and any other unwanted materials from all floors of buildings, drums, pits etc. and heaping within a distance of 100M as directed for measurement and dumping it in the low lying areas upto a distance of 5KM as directed at site. |
| 63 | Applying priming coat at all heights with white cement |
| 64 | Cement washing 1 coat at all heights |
| 65 | Painting one coat with ready mixed approved quality and colour plastic emulsion paint on old surfaces after cleaning the surface or succeeding coat on new painted surface. |
| 66 | Painting approved quality priming coat on new iron work after rubbing with emery paper and cleaning the surface well at all heights, with red oxide iron primer . |
| 67 | Painting one coat of approved quality and colour synthetic enamel paint at all heights to surfaces of new/old iron/wood work after rubbing with sand paper and cleaning well the surfaces. |
| 68 | Painting each succeeding coat of approved quality and colour synthetic enamel paint at all heights over the painting already done to new/old iron/ wood work. |
| 69 | Varnishing to new wood work with approved quality Copal varnish two coats after rubbing with sand paper and cleaning the surfaces well at all heights. |
| 70 | Polishing each succeeding coat with approved quality french spirit polish/ poly urethene transparent polish over the polishing already done to wood work at all heights. |
| 71 | Painting letters or figures 2.5cm to 5cm high (Block, Roman, Italic or Indian) with approved quality and colour synthetic enamel paint at all heights. |
| 72 | Painting letters or figures 6.5cm to 10cm high (Block,Roman,Italic or Indian) with approved quality and colour synthetic enamel paint at all heights. |
| 73 | Painting letters or figures less than 2.5cm high (Block, Roman, Italic or Indian) with approved quality and colour synthetic enamel paint at all heights. |
| 74 | Taking out and re-fixing of RCC pre-cast items such as drain cover slabs, fencing posts etc. at site as per direction. |
| 75 | Transporting excess spoil earth, gravel, sand, broken stones, split stones, laterite stones, blasted rubble/dismantled materials upto 45 DM3 size etc. by lorry to places pointed out upto a maximum distance of 5KM including loading with a lead of 50m and lift upto 1.5m at each loading point etc. complete. |
| 76 | Providing 20mm thick bitumen sand mix with blown type bitumen of penetration 85/ 25 or equivalent and clean river sand (120 kg. of industrial asphalt/ Cu.m of sand) over a tack coat (total industrial asphalt to be used at 31.5Kg/10 Sq.M of surface including 7.5kg/10sq.m of tack coat ) including all charges for cleaning the surface, heating, bitumen mixing, laying, consolidating, finishing etc. complete. |
| 77 | Fencing with G.I. Barbed wire 2 strand 4 points of suitable gauge having not less than 1.3 Kg/10 Rm of size and grouting the holes with cement mortar 1:1 including tightening to full rigidity. (Labour only) |
| 78 | Providing fencing with G.I. Barbed wire drawn through the holes provided in the RCC fencing post or by buckling the pins provided to full rigidity without any sagging and grouting the holes with cement mortar 1:4, etc.complete with 2 strand 4 points Type II barbed wire (2.5mm dia line wire and 2.24mm dia bars /No.14) |
| 79 | Dismantling carefully the damaged portion of the existing Acid Resistant / Fire Proof /Insulation/Carbon bricks including cast Castables of all thickness without disturbing the unaffected lining works, from tanks , vessels, furnaces, ducts, driers, Converters etc. of all shapes & sizes, neatly dressing and stacking the serviceable bricks for reuse and disposal of the unserviceable dismantled items at low lying areas / places pointed out with in the factory premises. |
| 80 | Fresh lining / repairing the lining using Acid Resistant/ Fire Proof / Insulation/Carbon bricks/ Castables to the required thickness with suitable mortar upto a height of 5M from the ground level for floors, walls, shells of inside tanks, vessels, furnaces , ducts, Converters ,driers etc. of all shapes and sizes including transporting of all the required materials from Udyogamandal General Stores/Civil Maintenance Office stores/Plant Stock Yards to the work site, preparation of the required mortar/castables as directed, carrying out the necessary scaffolding(both inside and outside the equipments), providing and removing necessary form work in the case of castables, arch/straight supports in the case of bricks etc. (lining materials will be issued free of cost). |
| 81 | Extra rate payable for executing the work as per the description of item No.89, for every additional 5M height over and above the initial 5M included in the item. |
| 82 | Dismantling carefully the damaged portion of the existing Acid Resistant Tiles including cast Castables of all thickness without disturbing the unaffected lining works from tanks , vessels, ducts, etc. of all shapes & sizes, neatly dressing and stacking the serviceable bricks for reuse and disposal of the unserviceable dismantled items at low lying areas / places pointed out with in the factory premises. |
| 83 | Fresh lining / repairing the lining using Acid Resistant Tiles of all thickness upto and including 40mm / Castables to the required thickness with suitable mortar upto a height of 5M from the ground level for floors, walls, shells inside of tanks, vessels, ducts, etc. of all shapes and sizes including transporting of all the required materials from Udyogamandal General Stores/Civil Maintenance Office stores/Plant Stock Yards to the work site, preparation of the required mortar/castables as directed, carrying out the necessary scaffoldings (both inside and outside the equipments), providing and removing necessary form work in the case of castables, arch/ straight supports in the case of tiles etc. (lining materials will be issued free of cost). |
| 84 | Dismantling carefully the damaged portion of the existing Acid Resistant/Fire Proof/ Carbon bricks of all thickness without disturbing the unaffected lining works from floors, cooler basins, drains etc. of all shapes & sizes, neatly dressing and stacking the serviceable bricks for reuse and disposal of the unserviceable dismantled items at low lying areas / places pointed out with in the factory premises. |
| 85 | Fresh lining / repairing the lining using Acid Resistant/ Fire proof bricks to the required thickness with suitable mortar for floors, drains, cooler basin etc. of all shapes and sizes including transporting of all the required materials from Udyogamandal General Stores/Civil Maintenance Office stores/Plant Stock Yards to the work site, preparation of the required mortar as directed, (lining materials will be issued free of cost). |
| 86 | Dismantling carefully the damaged portion of the existing Acid Resistant Tiles of all thickness upto and including 40mm without disturbing the unaffected lining works from floors, drains, cooler basin etc. of all shapes & sizes, neatly dressing and stacking the serviceable bricks for reuse and disposal of the unserviceable dismantled items at low lying areas / places pointed out with in the factory premises. |
| 87 | Fresh lining / repairing the lining using Acid Resistant Tiles of all thickness upto and including 40mm with suitable mortar for floors, drains, cooler basins etc. of all shapes and sizes including transporting of all the required materials from Udyogamandal General Stores/Civil Maintenance Office stores/Plant Stock Yards to the work site, preparation of the required mortar as directed, (lining materials will be issued free of cost). |
| 88 | Providing, fixing and removing straight or curved shuttering in concrete during casting for core holes, pockets etc. of all sizes and shapes for building, equipment and machine foundations at all levels including hire for materials, cost of labour/providing shuttering, oil to surfaces in contact in concrete, etc. complete. (measurement to be made for the area of shuttering coming in contact with concrete only) |
| 89 | Providing 110mm dia PVC pipe with all necessary fittings, joints pasted, including clamping of pipes by providing necessary plugs, clamps, screws, grouting of plugs with CM 1:4 and testing of pipes for leaks etc. complete on new work / replacing the existing line including dismantling the damaged one if necessary for rain water and soil waste line.(Labour only) |
| 90 | Providing 160mm dia PVC pipe with all necessary fittings, joints pasted, including clamping of pipes by providing necessary plugs, clamps, screws, grouting of plugs with CM 1:4 and testing of pipes for leaks etc. complete on new work / replacing the existing line including dismantling the damaged one if necessary for rain water and soil waste line.(Labour only) |
| 91 | Laying & jointing 110mm dia PVC pipe for sewerage lines, joints pasted and laid to lines & levels with all necessary fittings including testing of pipes for leaks etc. complete.(Labour only) |
| 92 | Laying & jointing 150mm dia PVC pipe for sewerage lines, joints pasted and laid to lines & levels with all necessary fittings including testing of pipes for leaks etc. complete.(Labour only) |
| 93 | Supplying 210 x 100 x 65mm or nearest size country burnt bricks at site. |
| 94 | Supplying & stacking at site 20 mm or nearest size hard granite broken stone for measurement |
| 95 | Bailing out water from foundation trenches, pits etc. using engine and pump or motor and pump of suitable capacity including hire for machinery, erection, cost of fuel and oil, power, labour etc.(1 Activity Unit= 1hph) |
| 96 | Clearing grass and removal of rubbish upto a distance of 150m outside the periphery of the area cleared including leveling the surface wherever necessary (Measurements to be made as per actual quantity executed). |
| 97 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50m in all classes of soil |
| 98 | Clearing and cleaning the inside and top of side walls of masonry drains, pipe/masonry culverts etc. by removing all earth, sand, debris, boulders, vegetation, organic wastes etc. complete transporting the collected materials manually or by mechanical means and depositing at low lying areas within the the factory primises as directed by the Engineer-in-charge for drain of any width and depth upto 1M |
| 99 | Clearing and cleaning the inside and top of side walls of masonry drains, pipe/masonry culverts etc. by removing all earth, sand, debris, boulders, vegetation, organic wastes etc. complete transporting the collected materials manually or by mechanical means and depositing at low lying areas within the the factory primises as directed by the Engineer-in-charge for drain of any width and depth more than 1M and upto 2M |
| 100 | Clearing and cleaning the inside and top of side walls of masonry drains, pipe/masonry culverts etc. by removing all earth, sand, debris, boulders, vegetation, organic wastes etc. complete transporting the collected materials manually or by mechanical means and depositing at low lying areas within the the factory primises as directed by the Engineer-in-charge for Pipe/masonry culverts of any diameter/section/depth |
| 101 | Providing, cutting to required size and placing in position 4mm thick AC sheets to the Aluminium frame work already provided for false ceiling. |
| 102 | Providing, fabricating and fixing in position to the door frames already provided, single/double leaf fully panelled shutters with 150 x 35mm bottom frame, 100 x 35mm top, sides and intermediate frames and 18mm thick panel planks (5 Nos. per shutter) including all charges for fixing hardwares but excluding cost of hardware. In first class and well seasoned Anjily wood. |
| 103 | Panelling the frame work of wooden partitions with 4mm thick commercial ply wood of approved quality and necessary brass wire nails including all charges for keeping uniform gaps between panels if required etc. complete. |
| 104 | Glazing the aluminium frame work of doors, windows, ventilators, and partitions with glass panes and anodised aluminium black matt finished approved brand beadings, with EPDM/NEOPRENE WEATHER SEALS, GASKETS OF EPDM or PVC, etc. and screws as per standard practice at all levels. (Measurements shall be for the overall area of door, windows, ventilators and partitions) with 3mm thick plain glass. |
| 105 | Glazing steel and aluminium doors, windows and ventilators with plain glass panes and special metal sash putty of approved make with 3mm thick plain glass panes |
| 106 | Glazing steel and aluminium doors, windows and ventilators with plain glass panes and special metal sash putty of approved make with 5.5mm thick plain glass panes |
| 107 | Glazing steel and aluminium doors, windows and ventilators with pin headed glass panes and special metal sash putty of approved make, 3mm thick glass. |
| 108 | Soling with departmental broken stones and blinding material to required thickness including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading blinding material and sweeping the same to fill the voids, watering profusely and consolidating by ramming or hand roller etc. complete. |
| 109 | Providing lining to dadoing/skirtings with 5mm or nearest available thickness glazed/ceramic tiles of approved quality, colour and make using necessary cement grout including pointing the joints with white cement mixed with suitable pigments, finished neat to lines and levels etc. complete at all heights. |
| 110 | Providing lining to floors with 6mm or nearest available thickness ceramic tiles of approved quality and colour (Johnson, Regency, Orient or equivalent) over a base course of cement mortar 1:3, 12mm average thick and necessary cement grout including pointing the joints with white cement mixed with suitable pigments, finished neat to lines and levels etc. complete at all heights. |
| 111 | Supplying and fixing shalitex or equivalent joint filler in expansion joints 20mm thick |
| 112 | Grouting base plates, pockets etc. at all levels with cement sand grout 1:1 mix including finishing the surfaces neat |
| 113 | Clearing and cleaning the inside and top of the septic tank of approximate size of 3.5x2m by pumping out the complete sludge and water inside the tank after removing the cover slab and transporting the collected materials manually or by mechanical means and depositing at suitable location including refixing the cover slab etc complete. |
| 114 | Dismantling and removing carefully the existing Asphalt surfaces of roads of all thickness, conveying and depositing the debris at places pointed out within a distance of 150M |
| 115 | Dismantling carefully the existing soling stone/pitching and stacking the serviceable stones and conveying and depositing the debris at places pointed out within a distance of 150M |
| 116 | Supplying and fixing floor spring hinges (Aluminium Dye cast (Heavy duty) |
| 117 | Supplying hard granite soling stone 75 to 150mm |
| 118 | Supplying hard broken stone 40mm size |
| 119 | Supplying Quarry dust |
| 120 | Supplying manufactured crushed stone sand conforming to IS stantards |
| 121 | Supplying 6mm broken granite stone chips |
| 122 | Supplying Iron screws 12mm |
| 123 | Supplying Iron screws 25mm |
| 124 | Supplying Iron screws 35mm |
| 125 | Supplying 8mm GI bolts/J hooks/L bolts with nuts,washers,bitumen washers- AL roofs |
| 126 | Supplying 8 mm GI seam bolts with nuts, washers, bitumen washers for jointing gutter |
| 127 | Supplying M.S. bolts and nuts |
| 128 | Supplying of 200mm or nearest size 16mm dia. Aluminium Aldrops |
| 129 | Supplying Automatic Hydraulic door closer (Heavy) |
| 130 | Supplying Automatic Hydraulic door closer -Everest make - medium. |
| 131 | Supplying Plain or corrugated AL sheets for roofing |
| 132 | Supplying linseed oil putty suitable for fixing glass. |
| 133 | Supplying MS wire nails |
| 134 | Supplying Brass wire nails |
| 135 | Supplying Anodised aluminium tower bolts 75mm |
| 136 | Supplying Anodised aluminium tower bolts 150mm |
| 137 | Supplying Anodised aluminium tower bolts 200mm |
| 138 | Supplying Turpentine |
| 139 | Supplying 6mm commercial plywood |
| 140 | Supplying 12mm commercial plywood |
| 141 | Supplying 15mm or nearest size CP pillar tap for wash basin |
| 142 | Supplying 32mm or nearest PVC telescopic flush pipe 1.8M or nearest length |
| 143 | Supplying White Cement |
| 144 | Supplying Hasp and staples 150mm iron |
| 145 | Supplying GM ball valve with polythene float for 15mm connection |
| 146 | Supplying Solvent Cement for PVC pressure pipe |
| 147 | Supplying 15mm PVC connection with learing nut, heavy |
| 148 | Supplying approved quality PVC low level flushing cistern (10 litre), white in colour. |
| 149 | Supplying approved quality PVC high level flushing cistern (10 litre), regular colour. |
| 150 | Supplying tar plastic bitumenous Roofing Compound |
| 151 | Supplying 15mm dia. GM full way wheel valve |
| 152 | Supplying 20mm dia. GM Full way wheel valve |
| 153 | Supplying Plain glass - 3mm |
| 154 | Supplying Plain glass - 5.5mm |
| 155 | Supplying Pin headed glass - 3mm |
| 156 | Supplying Pin headed glass - 5.0mm |
| 157 | Supplying frosted glass - 5.5mm |
| 158 | Supplying Aluminium beading for Aluminium window |
| 159 | Supplying Synthetic enamel paint (Medium) |
| 160 | Supplying PVC pipes Class - II 110mm OD (4kg/sq.cm) |
| 161 | Supplying PVC pipes Class - II 90mm OD (4kg/sq.cm) |
| 162 | Supplying PVC pipes Class - II 63mm OD (4kg/sq.cm) |
| 163 | Supplying PVC pipes Class - II 50mm OD (4kg/sq.cm) |
| 164 | Supplying 50mm Iron butt hinge |
| 165 | Supplying 75mm Iron butt hinge |
| 166 | Supplying 100mm Iron butt hinge |
| 167 | Supplying 150mm Iron butt hinge |
| 168 | Supplying Iron tower bolt - 100mm |
| 169 | Supplying Iron tower bolt - 150mm |
| 170 | Supplying Iron tower bolt - 200mm |
| 171 | Supplying Iron tower bolt - 300mm |
| 172 | Supplying Double acting Iron spring hinge - 150mm |
| 173 | Supplying Double acting Iron spring hinge - 125mm |
| 174 | Supplying Wood primer |
| 175 | Supplying wood Polish (Non-alcoholic) |
| 176 | Supplying Synthetic adhesive (Fevicol SH)) |
| 177 | Supplying Iron aldrop 200mm long and 16mm dia. |
| 178 | Supplying mortice lock dye cast, CP ,4 lever (with dup. Key and handles.) |
| 179 | Supplying 50mm Aluminium butt hinges |
| 180 | Supplying Aluminium handles 125mm with 175x32mm plate |
| 181 | Supplying Aluminium handles 100mm with 150x32mm plate |
| 182 | Supplying Piano hinges - Aluminium 35mm width 1mm thick |
| 183 | Supplying Iron hooks and eyes 65mm |
| 184 | Supplying Iron hooks and eyes 100mm |
| 185 | Supplying Iron hasp and staples 90mm |
| 186 | Supplying colouring Pigment of approved colour for flooring |
| 187 | Supplying Red oxide Iron primer |
| 188 | Supplying Copal varnish |
| 189 | Supplying 25mm OD class - 5 PVC pipe (10kg/sq.cm) |
| 190 | Supplying 20mm OD class - 5 PVC pipe (10kg/sq.cm) |
| 191 | Supplying 20mm dia Class- B GI pipe |
| 192 | Supplying 25mm dia Class - B GI pipe |
| 193 | Supplying PVC water line pipe fittings - 1/2\\" |
| 194 | Supplying PVC water line pipe fittings - 3/4\\" |
| 195 | Supplying PVC water line pipe fittings - 1\\" |
| 196 | Supplying MS casement window fasteners |
| 197 | Supplying 20mm PVC tap |
| 198 | Supplying best quality wall Putty. |
| 199 | Supplying Iron aldrop 150mm long and 8mm dia. |
| 200 | Supplying pillar tap inside fitting/ bonnet |
| 201 | Providing insulation blankets to the vessels, equipments and pipelines etc. including tying firmly with binding wire as per instruction (Labour only - Materials will be supplied by the company) - 25mm to 75mm thick. |
| 202 | Providing insulation blankets to the vessels, equipments and pipelines etc. including tying firmly with binding wire as per instructions (Labour only, material will be supplied by the Company) - 76 to 150mm thick. |
| 203 | Covering the insulation work on vessels, equipments and pipelines etc. with Aluminium sheet including providing groove joints wherever necessary with machine and fixing the sheets with self tapping screws, ceiling the joints with ceiling compound wherever required etc. complete as per instructions (labour only - Aluminium sheets and screws will be provided by the Company). |
| 204 | Covering the insulation work on vessels, equipments and pipelines etc. with old and re-usable Aluminum sheet including providing groove joints wherever necessary with machine and fixing the sheets with self tapping screw, ceiling the joints with ceiling compound wherever required etc. complete as per instructions (Labour only - Aluminium sheets and screws will be provided by the Company). |
| 205 | Stripping and removing the existing aluminum sheet covering work and insulation blankets of different pipelines, thickness from vessels, equipments etc. and disposing the re-usable Aluminium Sheet at places pointed out /MCD and transporting the dismantled wool to low lying areas in Township including transportation as per instructions. |
| 206 | Laying and fixing in position roofling, side cladding, flxing partition etc. with new AC trafford / corrugated / Tufflite sheets with required type and number of bolts, nuts and washers including applying a seal coat at the top projecting portion of the bolts with roofing compound etc. complete at all heights.(Labour Only) |
| 207 | Laying and fixing in position roofing, cladding, flxing partition etc. with new Aluminium / RMP sheets with required type and number of bolts, nuts, washers etc. including applying a seal coat at the top projecting portion of the bolts with roofing compound etc. complete at all heights. |
| 208 | Laying and fixing in position new AC ridges in pairs with required bolts, washers, nuts, sealing compound etc. complete. (Unit 'M' = in pairs per RM) |
| 209 | Dismantling and removing carefully the existing AC / GI sheet roofing, side cladding etc. from all heights, conveying and stacking the serviceable dismantled sheets at places pointed out, segregating and removing the unusable materials for disposal to places pointed out by the Engineer-in-charge. |
| 210 | Dismantling and removing carefully the existing Aluminium / RMP sheet roofing, side cladding etc. from all heights and conveying and stacking the serviceable dismantled sheets and segregating the unusable materials for disposal at places pointed out as per directions. |
| 211 | Dismantling and removing carefully the damaged ridges of A.C.sheets from roof of all heights, conveying and stacking the serviceable items at places pointed out and removing the unserviceable materials for disposal to places pointed out by the Engineer-in-charge.(Unit'M' = In pairs per RM). |
| 212 | Laying and fixing in position A.C. sheet roofing, side cladding etc. with ol d but serviceable sheets with the required type and number of bolts, nuts, washers etc. including application of roofing compound etc. complete at all heights. |
| 213 | Laying and fixing in position Aluminium/RMP sheet roofing, side cladding etc. with old but serviceable sheets with the required type and number of bolts, nuts, washers etc. including application of roofing compound etc. complete at all heights. |
| 214 | Fixing old but serviceable A.C. ridges with required bolts, washers, nuts, sealing compound etc. at all heights (Unit is in 'M' ie. n pairs pr RM). |
| 215 | Forming roofing bolts of the required sizes and shapes to suit the existing sheeting, purlins of structural members out of the straight GI bolts provided for the purpose by the company. |
| 216 | Cleaning as required and applying roofing compound at the tip of the existing bolts of the roof/cladding, sheeting woks, louvers at all heights including replacing of washers, nuts etc. wherever required. |
| 217 | Cutting grass,overgrowth ..etc using Brush Cutter Machine without disturbing nearby equipments, structures, pipes etc. and removal grass to the nearby low lying area. The rate include the rent of Machine, cost of fuel, labour etc. complete. |
| 218 | Supplying and plastering with FRBL plaster wall product, 4mm thick one coat floated hard and trowelled smooth at all hights. |
| 219 | Supplying CONBEXTRAGP2 or equivalent epoxy grout for grouting works at site |
| 220 | Applying cement primer on walls and ceiling at all heights including cost of all materials, labour charges, hire charges etc. complete after cleaning thoroughly as per instruction of the Engineer-in- charge |
| 221 | Painting one coat with exterior emulsion paint of approved brand and shade (Apex Ultima or equivalent) to exterior walls including parapet wall of sunshade and roof, fins, facias, projection of walls, show walls etc. including cost of all materials, labour charges, hire charges for scaffolding etc. complete at all heights after cleaning thoroughly as per instruction of the Engineer-in-charge |
| 222 | Painting each succeeding coat with acrylic emulsion exterior paint of approved brand and shade (Apex Ultima or equivalent) to exterior walls including parapet wall of sunshade and roof, fins, facias, projection of walls, show walls etc. including cost of all materials, labour charges, hire charges for scaffolding etc. complete at all heights after cleaning thoroughly as per instruction of the Engineer-in-charge |
| 223 | Supplying and fixing PVC door with shutter consisting of shutter frame made of extruded plastic section having dimension of 48 X 24 mm panelling with multi chambered hollow plastic section of 200 X 20 mm with an average wall thickness of 1 mm jointed with one another by tongue and groove joints and outer frame of door made of extruded plastic section of 68 X 60mm or nearest on all sides including supplying and fixing all required fittings such as anodised aluminium butt hinges, tower bolts, handles with screws, MS hold fasts for fixing door frames etc. complete as per manufactures specification |
| 224 | Providing and fixing false ceiling with PVC lamination sheet 6 mm thick (3600 X 250 X 6mm) of approved quality and shade on the existing wooden frame work including fixing to the frame work with C.P brass screws etc. complete as directed by the Engineer-in-charge including cost of PVC sheets, screws etc. and labour charges but excluding cost of frame work. |
| 225 | Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer-in-charge for superstructure in ground floor/ upto 5m height from plinth level/floor level |
| 226 | Providng JCB excavator or similar equipment for the removal of earth ,waste ,debris etc. including all charges for hire of equipment,cost of fuel and operators etc. complete |
| 227 | Providing back dumping truck of 10MT capacity (Tipper Lorry) for transporting earth, waste and debris from various places pointed out etc. including hire charges for truck fuel charges and operators charges etc. complete (mini 8 hrs per day) Please Enable Macros to View BoQ information |
| 228 | Providing back dumping truck of 10MT capacity (Tipper Lorry) for transporting earth, waste and debris from various places pointed out etc. including hire charges for truck fuel charges and operators charges etc. complete (mini 8 hrs per day) Please Enable Macros to View BoQ information |
