|
| 1 | Providing Water wash and appropriate methodology to restore the originalities of the existing Granite structures inclusive of necessary scaffolding charges, conveyance and all hire charegs for all tools and plants and clearing the site after completeion of work etc., complete. |
| 2 | Pointing the cut stone joints with Lime Mortor1:1.5 20 mm deep using red and yellow oxide and including cost of special tiles such brush and watering, curing etc complete, as per standard specifications. The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 3 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wallsOne Course of Pressed Tile Roof finish in cement mortar |
| 4 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wallsDismantling Lime Concrete |
| 5 | Finishing the top of roof with one course of machine pressed tiles 23cmx 23cmx20mm of approved quality laid in ;LM 1:1.5,12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications. |
| 6 | Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications. |
| 7 | Varnishing new and old wood work two coats of approved quality in all floors the rate includes cost of all materials, brushes, Scaffolding charges etc..Complete |
| 8 | Plastering with Lime Mortor1:1.5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 9 | Scraping the old paint and Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. -10 m 2 |
| 10 | Painting with multicolour (Panchavarnam) good Emulsion paints complete for the Vinamans/Gopurams, inculding cost and conveyence of all materials, lobour charges inculdinf Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. |
| 11 | Vimanam /Gopuram upto 15'-0\\" Height |
| 12 | Vimanam /Gopuram upto 25'-0\\" Height |
| 13 | Vimanam /Gopuram upto 50'-0\\" Height |
| 14 | Clean removal of lime plaster for wall surface etc., |
| 15 | Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with coconut keeth coverings, providing ladder arrangements, country wood pland for working, inpection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work 1 sq,ft. |
| 16 | Vimanam /Gopuram upto 15'-0\\" Height |
| 17 | Vimanam /Gopuram upto 25'-0\\" Height |
| 18 | Vimanam /Gopuram upto 50'-0\\" Height |
| 19 | Dismantling, clearing away and carefully stack ingmaterials useful for re-use for any thickness of walls Dismantling Plain Cement Concrete |
| 20 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 21 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 22 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 23 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 24 | Sub structure |
| 25 | Above basement- Ground floor |
| 26 | Random Rubble masonry work in CM 1:5 ( One of Cement and five of sand) Using selected stones and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications. |
| 27 | Centering for soffis of RCC slab of plane surface Iike lintel,beam etc.,including strutting 3.0m height using M.S.sheets of size 90 x 60cm and BG 10 stiffener with M.S.Angles of size 25x25x3mm laid over silver oak (CW) joists size 10cm x6.5 cm (spaced at about 90cm c/c) and supported by Casurina prop. 10cm to 13cm dia ( spaced of 75cm C/C) complying with standard specification. |
| 28 | Centering upto grade beam |
| 29 | Centering for beams and slabs for upto 3m ht |
| 30 | Brick work in cm 1:5 using Third Class Country Bricks Kiln Burnt of size 83/4\\" x 41/4\\" x 23/4\\" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification. |
| 31 | Sub structure |
| 32 | Super structure |
| 33 | Plastering with cemet mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications. |
| 34 | Supplying fabrication and placing in possition of MS or RTS bars for all RCC works including cutting bending placing and the cost of binding wire etc., complete. |
| 35 | Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With Lime Mortor1:1.5 etc complete. |
| 36 | Inner Flooring |
| 37 | Outer Flooring |
| 38 | Drilling of Bore walls anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in Alluvial Soil Sedimentary strata of day and stone shale pebbles boulders etc.By first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs,fuel,labour and drilling at site (Site will shown by the TWAD Board Officers) including construction of mud pit. |
| 39 | Drilling 150mm pilot bore |
| 40 | Reaming from 150mm dia to 300mm dia bore as directed by dept. officers. |
| 41 | Supply and delivery of vertical wet type submersible pumpset 2 HP capable of discharging with control panel with necessary pipes and fitting and labour charges etc.complete. |
| 42 | 3 PAHSE 2 HP ISI make 4 stage submersible pumpset 100x40 with Excise duty and taxes etc. |
| 43 | 160mm PVC end cup |
| 44 | GM white |
| 45 | 500ML Solvent cement |
| 46 | Bolt and Nut |
| 47 | 50mm PVC Coupling |
| 48 | 50mm PVC Bend |
| 49 | 50mm PVC Elbow |
| 50 | 6 Sqmm 3 core flat Cable |
| 51 | PVC Tap Roll (Empier Tape) |
| 52 | Nool Kandy |
| 53 | Gusket shellac |
| 54 | 50mm class PVC 10 KSC |
| 55 | 150mm CS Casing Medium depth PVC pipe. |
| 56 | 3 Phase panel board - D.O.L with two level guard and auto start ( 13390+1951 ) Rate + 4% vat |
| 57 | Slotter charge |
| 58 | Labour charges for inserting 150mm dia M.S Casing pipes assembly (With Slots or without slots)in the drilled hole including welding the joints an packing annular space with Pebbles of size and quality as approved by the Executive Engineer / TWAD Board. |
| 59 | Charges for developing the borewells with air compressor of 300 cfm capacity (minimum 8 hours) including transporation, labour and fuel charges for compressor as directed by TWAD Board Officers and conducting Yield test by \\"V\\" Notch method. |
| 60 | Supplying laying and jointing HDPE pipe of approved quality and best variety conforming to ISS and with ISI mark of 50mm including cutting threading and fixing PVC specials and including earth work exvcavation for 1M depth below ground level etc complete as per standard specifications.(For sub-marsible pump in borwell class-5 ,1mpa) |
| 61 | Best tiles roofing with mangalore tiles lincuding teak reeprs-10 m2 |
| 62 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) |
| 63 | Supply and fixing of 30W fitting on suitable Al Frame LED on wall with necessary clamps with connection. Philips or equivalent |
| 64 | Supply and fixing of 7W / 9W LED bulb with battern Holder |
| 65 | Supply and fixing of 100W LED Fitting with Necessary clamp on Wall/ceiling with clamps with PVC unsheathed Copper leads from terminals to the fitting |
| 66 | Supply and fixing of 4'LED 20W Fitting with LED 20W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting |
| 67 | supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . |
| 68 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed insuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) . |
| 69 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with 1No 32 Amps DPMCB isolater as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand/Hager make). |
| 70 | Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box with hylum sheet cover on Wall |
| 71 | Supply and fixing of 375 mm (15\\") sweep heavy duty AC exhaust fan complete without provision of hole in the wall |
| 72 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour |
| 73 | Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 2.5 sq.mm copper wire with painting of suitable colour |
| 74 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 4 sq.mm copper wire with painting of suitable colour |
| 75 | Supply and run of 35mm x 20mm,1.6 mm Thick Solid type cable tray with cover of 1.2mm Thick, with Tee's,bends, Joint plate arrangements complete on Existing Angle iron work on pillar /wall |
| 76 | Supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 77 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 78 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 79 | Supply and providing of clamp sets using 2 nos of 25mmx6mm MS flate of length 31/2' and 2 nos of 12mm MS bolt and nuts and washer for the duct support on the pillers. The clamp set are painted with two coats of paints with the suitable colour |
| 80 | Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/ Door cover with IP42 Protection, with 100 A 4 PoleI isolator and 4 Nos 63A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. Lower end. |
| 81 | Supply and fixing of Douple pole sheet steel enclosure with 1 no 40 A DP MCB on wall and necessary connection for street light control |
| 82 | sub total |
| 83 | GST 18% Please Enable Macros to View BoQ information |
