|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | All kinds of soil = 50% |
| 3 | Ordinary rock =50% |
| 4 | Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 mtr. |
| 5 | All kinds of soil = 50% |
| 6 | Ordinary rock =50% |
| 7 | Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size). |
| 8 | Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:6 coarse sand:6 graded stone aggregate 20mm nominal size). |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size). |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level: a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : a) Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 14 | Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level. |
| 15 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : a) 1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 16 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 17 | Centering and shuttering including strutting propping etc. and removal of form work for:- |
| 18 | Foundations, footings, bases of columns etc. for mass concrete. |
| 19 | Columns, pillars, piers, abutments, posts and struts. |
| 20 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Suspended floors, roofs, landings, balconiesand access platform. |
| 22 | Edges of slabs and breaks in floors and walls under 20cm wide. |
| 23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) Sal Wood. |
| 25 | Providing 40 x 5mm flat iron hold fast 40cm long including fixing to frame with 10mm dia. bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15cm in (1:3:6) mix with 20mm nominal crushed aggregate. |
| 26 | 12mm Cement plaster of mix:(a) 1 : 4 ( 1 cement : 4 coarse sand) |
| 27 | 15mm Cement plaster on the rough side of single or half brick wall of mix: ( 1 cement : 4 coarse sand) |
| 28 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. A) Welded. |
| 29 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 30 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. A) 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 31 | Supplying and installation of moisture resistant/fire resistant 6mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling/taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4mm thick of 8 to 10 gauge of length varying from 25 to 45mm. |
| 32 | Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm. |
| 33 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. a) Size of tile 600x600 mm |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. a) Crushed. |
| 37 | Providing and fixing 35mm ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 38 | Providing and fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : a) Second class deodar wood |
| 39 | Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. A) Second class teak wood |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. A) Fixed to steel windows by welding |
| 41 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. A) 2 mm thick |
| 42 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. A) Two coats |
| 43 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 44 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. A) Two or more coats on new work. |
| 46 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. a) 50mm thick with 20 mm nominal size stone aggregate. |
| 47 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 48 | a) 125x75x4 mm |
| 49 | 75x45x3.2mm |
| 50 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300x16 mm |
| 51 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 52 | a) 300x10 mm |
| 53 | b) 100x10mm |
| 54 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 55 | 100 mm |
| 56 | 125 mm |
| 57 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) Twin rubber stopper |
| 58 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a) W.C. pan with ISI marked white solid plastic seat and lid |
| 59 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : i) Kitchen sink without drain board a) 610x510mm bowl depth 200mm |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 62 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : a) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 63 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: a) Flexible pipe: i) 32mm dia. |
| 65 | Providing and fixing PVC soil waster pipe including bed concrete all around PVC pipe as per standard design (Prince, Finolex, supreme). |
| 66 | 75mm dia. (LMR) |
| 67 | 100mm dia. (LMR) |
| 68 | Providing and fixing PVC loose collar (Prince, Finolex, supreme). |
| 69 | 75mm dia. (LMR) |
| 70 | 100mm dia. (LMR) |
| 71 | Providing and fixing PVC plain bend (Prince, Finolex, supreme). |
| 72 | 75mm dia. (LMR) |
| 73 | 100mm dia. (LMR) |
| 74 | Providing and fixing PVC door tee (Prince, Finolex, supreme). |
| 75 | 75mmx75mm dia. (LMR) |
| 76 | 100mmx100mm dia. (LMR) |
| 77 | Providing and fixing PVC terminal guard (Prince, Finolex, supreme) a) 100mm dia. (LMR) |
| 78 | Providing and fixing PVC clamps (Prince, Finolex, supreme). |
| 79 | 40mm dia. (LMR) |
| 80 | 100mm dia. (LMR) |
| 81 | Cutting holes up to 30x30 cm in walls including making good the same: a) With common burnt clay (non modular) bricks |
| 82 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof |
| 83 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. i) Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing : |
| 85 | a) 15mm nominal outer dia pipes. |
| 86 | 20mm nominal outer dia pipes. |
| 87 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 88 | Providing and fixing PVC for Gully, floor or nahani trap. (LMR) |
| 89 | Providing and fixing PTMT grating of approved quality and colour. i) Circular type : a) 100 mm nominal dia. |
| 90 | Providing and fixing of PVC connection pipe with brass unions: 15mm nominal bore. (LMR) |
| 91 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: a) 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 92 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 93 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 94 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 95 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. A) Rectangular Shape 453x357 mm. |
| 96 | Providng and fixing 1.00 H.P. Motor (complete job) Crompton / Khalsi / Orient. (LMR) |
| 97 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 98 | Providing and fixing Geyser 35 ltr. of approved quality (Make Usha, Jaguar, Crompton, Havels) (complete job) (LMR). |
| 99 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 100 | Providing and fixing Acarylic letters (min. 6mm thick) including SMPS lighting system RGYB color scheme complete job. (thickness / color scheme as per MC approved theme & directions of engineer in charge) (Alphabet height not less than 1'-6\\") (LMR) |
| 101 | Supply, installation, Testing and commissioning of 70W LED street lights having system lumen efficiency of minimum 100 lumen per watt, 3 kv surge protection, IP 66, manufacture named enbossed on dicast Aluminium body (LMR) |
| 102 | Wiring for light point, fan point/exaust fan point / call bell point with 1.5 sq mm FRLS PVS insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI Box earthing the point with 1.5 sq. mm FRLS PVS insulated copper conductor single core cable etc. as required. (LMR) |
| 103 | Providing and fixing ceiling fans (1400mm) of approved brand (Havels, Usha, Crompton etc) (LMR) |
| 104 | Providing and fixing Exhaust fans for kitchen and bathroom of approved brand (Havels, Usha, Crompton etc) (LMR) |
| 105 | Wiring for light / power plug with 2.4 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor cable for loop earthing as require (LMR) |
| 106 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required |
| 107 | 2x2.5 sq. mm + 1x2.5 sq. mm earth wire (LMR) |
| 108 | 2x6.0 sq. mm + 1x8.0 sq. mm earth wire (LMR) |
| 109 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess, complete with tinned copper bus bar, neutral but bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required MCB / RCCB / Isolator (LMR) |
| 110 | Supplying and fixing 5 am psto 32 amps ratings, 240 volts, 'C\\" series, miniature circuit breaker suitable for industive load of following poles in the existing MCB complete with connections, as required (LMR) |
| 111 | Supplying and fixing following electrical items complete with connections as required (LMR) |
| 112 | Supplying, installation, testing and commissioning of lightening fixtures : |
| 113 | a) 20 / 22 watt LED 4 feet tube light (LMR) |
| 114 | 18 / 20 watt surface mounted round / square dlim panel LED down lighter min 1400 mLumens. (LMR) |
| 115 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 116 | Sand from Hut Mashka for an av. lead of 80.00 km. by M.T. |
| 117 | Stone aggregate (Crusher bajree) below 40mm nominal size from Hut Mashka for an av. lead of 80.00 km. by M.T. |
| 118 | Stone aggregate 40mm nominal size & above from Hut Mashka for an av. lead of 80.00 km. by M.T. |
| 119 | Bricks from Kathua for an average lead of 170.00 Km. by M.T. Please Enable Macros to View BoQ information |
