|
| 1 | Dismantling structural steel work including doors, windows, gates but excluding framed truss etc. |
| 2 | M&L for brickwork with old size, sub-class 'B' bricks straight or curved on plan exc. 6m mean radius in CM 1:4. |
| 3 | M&L for rendering 15mm thick with neeru finish on fair faces of brick or concrete surfaces of walls in CM 1:4. |
| 4 | M&L for rendering 15mm thick with sand faced finish on fair faces of brick or concrete surfaces of walls in CM 1:4. |
| 5 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 6 | M&L Granite edge moulding to 18 to 20 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete. |
| 7 | S&F framed worked such as grills, gratings etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; frameworks of water tanks and similar work conforming to be Fe 290. Gde-E-165. |
| 8 | S&F Powder coated anodised aluminium frame for doors windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 9 | S& F powder coated anodised Aluminium (Al) window & ventilator shutters side hung type without sash bar, Al section weighing 0.55 Kg/m including necessary joining cleats, glazing clips ,ruber neoprene packing, handles 2 nos in each door hinges anodised Al snap beading screws as peg stays 150 mm long (1 nos) hinges type (B21 100 mm long suitable handle 1 nos complete all as specified. |
| 10 | M&L for 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane. |
| 11 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples |
| 12 | Rough excavation not exceeding 1.5 m deep and getting out hard and dense soil |
| 13 | M&L for murum filling in pavings, laid in layers n exc 15cm thick. Spread, levelled and rommed including watering, consolidated. |
| 14 | M&L for Hard core of gauge n.exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders. |
| 15 | M&L for providing cement concrete type B2 1:2:4 mix (40mm graded aggregate) in foundations, filling and mass concrete. |
| 16 | M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4. |
| 17 | M&L Joint free Non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but n exe 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 18 | M&L chequerd cement concrete tiles with white cement and pigment of size 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cememnt sluury in floors. |
| 19 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 20 | M&L for preparing plastered or unplastered new or previously untreated surfaces and applying two coats of plastic emulsion distemper on walls over one coat of primer with alkali resistant make Asian, Nerolack , Berger, jotun |
| 21 | M&L finishing walls with acrylic smooth exterior paint if required shade new work (two or more coat applied @ 1.67 ltr/10 sqm. Over and including priming coat of exterior primer applied @2.20 kg/10 sqm, make Asian, Nerolack, Berger, jotun |
| 22 | Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed. Soil, rock, P.C.C. Please Enable Macros to View BoQ information |
