|
| 1 | BOUNDARY WALLEarth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil and dewatering if required etc.all complete as per the direction of Engineer-in-charge length(1013 mt) |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc.all complete as per the direction of Engineer-in-charge. |
| 3 | Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including all lifts involved.etc as per the direction of Engineer-in-charge. |
| 4 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floor using cement,4 cm. size black hard crusher broken granite stone metal, screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T&P required for the work including shoring, shuttering and dewatering, hire & running charges of water pump complete if required as per the instruction of the Engineer -in -charge. |
| 5 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-20 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. |
| 6 | Providing and laying machine cut laterite masonry work in Superstructure using in cement mortar (1:6), with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, all taxes, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 7 | Providing, fixing in position TMT / Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of steel and binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. |
| 8 | Providing 12mm thick cement plaster with cement mortar of (1:6) |
| 9 | Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 10 | Finishing wall surface of walls with cement based wall putty (water based) for ground floor inside |
| 11 | Supplying, Fitting and Fixing M.S works of approved designs made out of M S Flat, Square bars/Round bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 12 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, taxes, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) |
| 13 | Fencing wire 4mm |
| 14 | ENTRANCE GATEEarthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 15 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
| 16 | Supplying of filling sand in foundation and over areas including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-charge. |
| 17 | Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height as direction of Engineer-In-charge. |
| 18 | Brick work with Fly ash Bricks in cement mortar (1:6) in Foundation and Plinth having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. all complete as per the specification and direction of Engineer-In-charge. |
| 19 | Brick work with Fly ash Bricks in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. all complete as per the specification and direction of Engineer-In-charge. |
| 20 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-30 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.a) Footings :- |
| 21 | b) Pedestal |
| 22 | c) Plinth beam :- |
| 23 | d) Column up to Slab top :- |
| 24 | e) Beam |
| 25 | f) Slab :- |
| 26 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge.Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 27 | 12mm cement plaster on internal RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. all complete as per the specification and direction of Engineer-In-charge. |
| 28 | 16mm cement plaster on external smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. all complete as per the specification and direction of Engineer-In-charge. |
| 29 | 6mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as direction of Engineer-In-charge. |
| 30 | Providing and fixing Steel work welded in built up section / framed (including M.S. angle,plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating,frames,guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge.(All structural steel contractor's own supply). |
| 31 | Providing & applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 32 | Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete. |
| 33 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 34 | Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete. |
| 35 | Providing & fixing Unistone or equivalent Glass reinforced concrete (G.R.C) brick tile in approved pattern i.e. red shade and size different textures of natural brick. The GRC brick tile shall have texture and shade of natural brick. The thickness of GRC brick tile shall be between 12-14mm having weight of approxmately 3-3.5 kg per Sq Ft. The GRC brick tile should be made from '43 grade' White portland cement manufactured by 'jk cement' or equivalent, quartz, fine silica sand, Alkali resistant glass fiber manufactured by N.EG JAPAN OR equivalent , super plasticizers manufactured by BASF or equivelent polymer manufactured by BASF or equivalent and U.V resistance Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) LANXESS or equivalent.The material casting should take place in FRP molds. The fixing of GRC brick tile should take place on rough plastered surface of 1: 3 (cement : coarse sand) with Dual fixing procedure i.e. exterior grade cement polymer based tile adhesive Unistone ultimate or equivalent to be applied with exterior grade cement polymer based tile adhesive Unistone Ultimate or equivalent to be applied with exterior grade cement polymer based grout in matching brick tile shade to be used to tile group. |
| 36 | Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor. |
| 37 | Providing and fixing of stainless steel name plate at the top of the Entrance gateway wall and complete all as direction of the Egineer-in-Charge. |
| 38 | PAVER AREA & PATH WAYEarth work in excavation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 39 | Construction of granular sub-base by providing Gr.-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller. |
| 40 | Providing of 80 mm thick factory made cement concrete interlocking paver block of M-35 grade and approved make,varity colour and size made by block making machine with strong vibratory compection of approved design and shape ,laid in required colour and pattern over 50mm thick compected bed of coarse sand ,filling the joints with fine sand etc,all T&P etc complete as per direction of Engineer- in-charge. |
| 41 | CHILDREN'S PLAY & GYMANASIUM EQUIPMENTSCYCLING ;Suppling and fixing Cycling over platform including material, labour charges as per engineer-in-charge. Actual Dimension Size(L X W X H): 3'1\\" X 1'10\\" X 3'10\\" , Made of : Galvanized Poles , fixing the poles by providing MS plate & MS angle with nut and bolting in a concrete base of cement concrete (1 : 2 : 4) including art or texture including all cost of materials, labour, T& P etc all complete. Paint : Powder Coating, Colour : Siver , Orange , Clamp Based Fitment System , Comply with Europiean EN 1176 Standards , 100 % Non - Toxic , fire retardant and UV stabilized colours. Age Group: 14-80 years. No of user : Single User. |
| 42 | SITUP BOARD ;Suppling and fixing situp board press over platform including material, labour charges as per engineer-in-charge. Actual Dimension Size(L X W X H): 6'2\\" X 4'9\\" X 4'1\\" , Made of : Galvanized Poles , Made of : Galvanized Poles , fixing the poles by providing MS plate & MS angle with nut and bolting in a concrete base of cement concrete (1 : 2 : 4) including art or texture including all cost of materials, labour, T& P etc all complete. Paint : Powder Coating, Colour : Silver , Orange , Clamp Based Fitment System , Comply with Europiean EN 1176 Standards , 100 % Non - Toxic , fire retardant and UV stabilized colours. Age Group: 14-80 years. No of User : Double User. |
| 43 | SKY WALKERSuppling and fixing sky walker over platform including material, labour charges as per engineer-in-charge. Actual Dimension Size(L X W X H): 3'5\\" X 1'9\\" X 4'9\\" , Made of : Galvanized Poles ,Made of : Galvanized Poles , fixing the poles by providing MS plate & MS angle with nut and bolting in a concrete base of cement concrete (1 : 2 : 4) including art or texture including all cost of materials, labour, T& P etc all complete. Paint : Powder Coating, Colour : Silver , Orange , Clamp Based Fitment System , Comply with Europiean EN 1176 Standards , 100 % Non - Toxic , fire retardant and UV stabilized colours. Age Group: 14-80 years. No of user : Single User. |
| 44 | ARM WHEELSuppling and fixing Arm Wheel over platform including material, labour charges as per engineer-in-charge. Actual Dimension Size(L X W X H): 2'9\\" X 2'8\\" X 6'0\\" , Made of : Galvanized Poles , Made of : Galvanized Poles , fixing the poles by providing MS plate & MS angle with nut and bolting in a concrete base of cement concrete (1 : 2 : 4) including art or texture including all cost of materials, labour, T& P etc all complete. Paint : Powder Coating, Colour : Silver , Orange , Clamp Based Fitment System , Comply with Europiean EN 1176 Standards , 100 % Non - Toxic , fire retardant and UV stabilized colours. Age Group: 14-80 years. No of user : Double User. |
| 45 | ALL IN ONESuppling and fixing all in one playing equipment over platform including material, labour charges as per engineer-in-charge. Safe Play Area:- 25 ft x 32 ft. Sq. deck :- 4, FRP Bridge-8 ft long:- 1,Tunnel 6 ft long :-1Spiral slide 5 ft :-1Ladder 5 ft high :-1slide 5 ft :-2Bowl Slide :-1FRP Staircase 3 ft ht:- 1Rock climber :-1Chain climber :-1Swinging bridge 8 ft long :-1 |
| 46 | WAVE SLIDESuppling and fixing wave slide playing equipment over platform including material, labour charges as per engineer-in-charge.Specification a. Height:- 5 ft or 7 ftb. Slide Length:- 11 ft or 15 ftc. Slide:- FRPd. Ladder Pipes:- 32 mm ODe. Railing Pipes:- 20 mm OD |
| 47 | MULTI LANE SLIDESuppling and fixing multi lane slide playing equipment over platform including material, labour charges as per engineer-in-charge.Specificationa. Height:- 5 ftb. Slide Length:- 10 ftc. Slide:- FRP |
| 48 | Arch swing 2-seaterSuppling and fixing arch swing 2 seater playing equipment over platform including material, labour charges as per engineer-in-charge.Specification a. Support Pipes:- 80 mm ODb. Horizontal Pipes:- 56 mm ODc. Seats :- 4 singles (Rubber)d. Movement:- Bearing |
| 49 | 4SEATER ARCH SWINGSuppling and fixing arch swing 4- seater playing equipment over platform including material, labour charges as per engineer-in-charge.Specificationa. Support Pipes:- 80 mm ODb. Horizontal Pipes:- 56 mm ODc. Seats (FRP) :- 4 singlesd. Movement:- Bearing |
| 50 | Animal merry go roundSuppling and fixing animal merry go around playing equipment over platform including material, labour charges as per engineer-in-charge.Specification a. Dia:- 1500 mm b. Main Support:- Angle Frame Supportc. Handle:- 15 mm pipe d. Animals:- FRP e. Bearing:- Double Conical Bearing |
| 51 | ROCKING BOATSuppling and fixing rocking boat playing equipment over platform including material, labour charges as per engineer-in-charge.Specification a. Frame:- 25 mm pipeb. Seat:- 2 Nos FRP |
| 52 | LANDSCAPE & HORTICULTURE WORKTrenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water |
| 53 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete |
| 54 | Supplying and stacking at site dump manure from approved source, including carriage upto 1 km complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm |
| 55 | Screened through sieve of I.S. designation 16 mm |
| 56 | Rough dressing the trenched ground including breaking clods. |
| 57 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 58 | Fine dressing of the ground. |
| 59 | selection No. 1 grass including watering and maintenance of the lawn for 120 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the earth shall be paid for separately). |
| 60 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 61 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep |
| 62 | Holes 60 cm dia, and 60 cm deep |
| 63 | Holes 45 cm dia, and 45 cm deep. |
| 64 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)Trees Plant |
| 65 | Shrubs Plant |
| 66 | Hedge Plant |
| 67 | Providing & fixing of River Pabbles size of 2\\" to 2.50\\" dia in natural colour. at site of work including loading, unloading, carriage etc.and as per direction of officer in charge. |
| 68 | Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 69 | Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 70 | Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 71 | Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 72 | Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 73 | Supply and stacking of Ficus benjamina (green) plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. |
| 74 | Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 75 | Supply and stacking of Foxtail palm plant of ht. 120-150 cm bottom girth 15-20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 76 | Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-incharge. |
| 77 | Supply and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-incharge. |
| 78 | SHRUBSProviding and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 79 | Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. |
| 80 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-incharge. |
| 81 | Supply and stacking of plant Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 82 | Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 83 | Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranchesed, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 84 | Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 85 | Supply and stacking of plant Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge. |
| 86 | Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-incharge. |
| 87 | Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 88 | Supply and stacking of plant Hibiscus variegated of height 45-60 cm. with 3-4 branches and healthy variegated foliage in earthen pots of size 20 cm as per direction of the officer-incharge. |
| 89 | Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 90 | Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . |
| 91 | Supply and stacking of Lagerstroemia flosreginae plant of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 92 | Supply and stacking of plant Nerium oleander variegated of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 93 | Supply and stacking of plant Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-incharge. |
| 94 | Providing and Displaying Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge. |
| 95 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 96 | Supply and stacking of plant Tecoma gaudichaudi of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 97 | Supply and stacking of plant Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 98 | Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 99 | Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha,Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-incharge.. |
| 100 | CLIMBERSSupply and stacking of Bignonia venusta (Golden shower) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 101 | Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 102 | Supply and stacking of Petrea volubilis plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 103 | Supply and stacking of Quisqualis indica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 104 | Supply and stacking of Ipomea purpurea (Morning glory) plant of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 105 | Supply and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm.in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 106 | GROUND COVERS PLANTSProviding and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 107 | Providing and Displaying of Asparagus sprengeri plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 108 | Providing and Displaying of of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 109 | Providing and Displaying of Dianella variegated plant, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 110 | Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 111 | Providing and Displaying of Ipomea (Golden leaves) plant,with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 112 | SHADE LOVING PLANTSProviding and displaying of Dracaena warneckii having ht. 30 cm to 45 cm. with good colour foliage, well developed, fresh and healthy in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 113 | Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per directionof the officer-in-charge. |
| 114 | Providing and displaying of Schefflera high colour plant, having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 115 | Providing and displaying of Syngonium golden plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 116 | Manufacturing, supplying and fixing retro reflective sign boards madeup of 2 mm thick aluminium sheet, face to be fully covered with highintensity encapsulated type heat activated retro reflective sheetingconforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applyingheat and pressure conforming to class -2 of ASTM-D-4956-01 andfixing the same with suitable sized aluminium alloy rivets @ 20 cmc/c to back support frame of M.S. angle iron of size 25x25x3 mmalong with theft resistant measures, mounted and fixed with 2 Nos.M.S. angles of size 35x35x5 mm to a vertical post made up to M.S.Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes inpipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufactureover priming coat of zinc chromate yellow primer (vertical MS-Teesupport to be painted in black and white colours).Backside ofaluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer--in-charge.Mandatory/ Regulatory sign boards of 900 mm diametrewith support length of 3750 mm |
| 117 | Cautionary /warning sign boards of equilateral triangularshape having each side of 900 mm with support length of3650 mm |
| 118 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage |
| 119 | Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
